Belts - Inch Timing - 5.080mm Pitch XL - 6.4mm Wide - Single Sided

217 Products in this selection
  • Standard Series Timing Belts 5.080mm or 0.200 inch pitch.
  • Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
  • Tooth Length (T) - 1.40mm.
  • Tooth Height (H) - 1.30mm.
  • Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm.
  • Pitch (P) - 5.080mm (0.200 inch)
Additional resources:
Timing Belts Catalogue PDF
Timing Pulleys Catalogue
Teeth Length Width Reinforcement Appearance Indicative
Image
94
Nr. 		477.52
mm 		6.4
mm 		Fibreglass
 Black
 1185206 | B-XL-0094-0064-NFB --- Belts - 94 Teeth x 477.52 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0094-0064-NFB Belts - 94 Teeth x 477.52 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
Teeth Length Width Indicative
Image
94
Nr. 		477.52
mm 		6.4
mm 		1185206 | B-XL-0094-0064-NFB --- Belts - 94 Teeth x 477.52 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0094-0064-NFB Belts - 94 Teeth x 477.52 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
95
Nr. 		482.6
mm 		6.4
mm 		Fibreglass
 Black
 1185748 | B-XL-0095-0064-NFB --- Belts - 95 Teeth x 482.6 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0095-0064-NFB Belts - 95 Teeth x 482.6 mm x 6.4 mm
28 Available
| Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
95
Nr. 		482.6
mm 		6.4
mm 		1185748 | B-XL-0095-0064-NFB --- Belts - 95 Teeth x 482.6 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0095-0064-NFB Belts - 95 Teeth x 482.6 mm x 6.4 mm
28 Available
| | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
96
Nr. 		487.68
mm 		6.4
mm 		Fibreglass
 Black
 1186430 | B-XL-0096-0064-NFB --- Belts - 96 Teeth x 487.68 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0096-0064-NFB Belts - 96 Teeth x 487.68 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
96
Nr. 		487.68
mm 		6.4
mm 		1186430 | B-XL-0096-0064-NFB --- Belts - 96 Teeth x 487.68 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0096-0064-NFB Belts - 96 Teeth x 487.68 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
97
Nr. 		492.76
mm 		6.4
mm 		Fibreglass
 Black
 1186614 | B-XL-0097-0064-NFB --- Belts - 97 Teeth x 492.76 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0097-0064-NFB Belts - 97 Teeth x 492.76 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
97
Nr. 		492.76
mm 		6.4
mm 		1186614 | B-XL-0097-0064-NFB --- Belts - 97 Teeth x 492.76 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0097-0064-NFB Belts - 97 Teeth x 492.76 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
98
Nr. 		497.84
mm 		6.4
mm 		Fibreglass
 Black
 1186787 | B-XL-0098-0064-NFB --- Belts - 98 Teeth x 497.84 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0098-0064-NFB Belts - 98 Teeth x 497.84 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
98
Nr. 		497.84
mm 		6.4
mm 		1186787 | B-XL-0098-0064-NFB --- Belts - 98 Teeth x 497.84 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0098-0064-NFB Belts - 98 Teeth x 497.84 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
99
Nr. 		502.92
mm 		6.4
mm 		Fibreglass
 Black
 1186979 | B-XL-0099-0064-NFB --- Belts - 99 Teeth x 502.92 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0099-0064-NFB Belts - 99 Teeth x 502.92 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
99
Nr. 		502.92
mm 		6.4
mm 		1186979 | B-XL-0099-0064-NFB --- Belts - 99 Teeth x 502.92 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0099-0064-NFB Belts - 99 Teeth x 502.92 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
100
Nr. 		508
mm 		6.4
mm 		Fibreglass
 Black
 1188157 | B-XL-0100-0064-NFB --- Belts - 100 Teeth x 508 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0100-0064-NFB Belts - 100 Teeth x 508 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
100
Nr. 		508
mm 		6.4
mm 		1188157 | B-XL-0100-0064-NFB --- Belts - 100 Teeth x 508 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0100-0064-NFB Belts - 100 Teeth x 508 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
101
Nr. 		513.08
mm 		6.4
mm 		Fibreglass
 Black
 1188547 | B-XL-0101-0064-NFB --- Belts - 101 Teeth x 513.08 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0101-0064-NFB Belts - 101 Teeth x 513.08 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
101
Nr. 		513.08
mm 		6.4
mm 		1188547 | B-XL-0101-0064-NFB --- Belts - 101 Teeth x 513.08 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0101-0064-NFB Belts - 101 Teeth x 513.08 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
102
Nr. 		518.16
mm 		6.4
mm 		Fibreglass
 Black
 1189098 | B-XL-0102-0064-NFB --- Belts - 102 Teeth x 518.16 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0102-0064-NFB Belts - 102 Teeth x 518.16 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
102
Nr. 		518.16
mm 		6.4
mm 		1189098 | B-XL-0102-0064-NFB --- Belts - 102 Teeth x 518.16 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0102-0064-NFB Belts - 102 Teeth x 518.16 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
103
Nr. 		523.24
mm 		6.4
mm 		Fibreglass
 Black
 1189211 | B-XL-0103-0064-NFB --- Belts - 103 Teeth x 523.24 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0103-0064-NFB Belts - 103 Teeth x 523.24 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
103
Nr. 		523.24
mm 		6.4
mm 		1189211 | B-XL-0103-0064-NFB --- Belts - 103 Teeth x 523.24 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0103-0064-NFB Belts - 103 Teeth x 523.24 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
104
Nr. 		528.32
mm 		6.4
mm 		Fibreglass
 Black
 1189315 | B-XL-0104-0064-NFB --- Belts - 104 Teeth x 528.32 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0104-0064-NFB Belts - 104 Teeth x 528.32 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
104
Nr. 		528.32
mm 		6.4
mm 		1189315 | B-XL-0104-0064-NFB --- Belts - 104 Teeth x 528.32 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0104-0064-NFB Belts - 104 Teeth x 528.32 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
105
Nr. 		533.4
mm 		6.4
mm 		Fibreglass
 Black
 1189857 | B-XL-0105-0064-NFB --- Belts - 105 Teeth x 533.4 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0105-0064-NFB Belts - 105 Teeth x 533.4 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
105
Nr. 		533.4
mm 		6.4
mm 		1189857 | B-XL-0105-0064-NFB --- Belts - 105 Teeth x 533.4 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0105-0064-NFB Belts - 105 Teeth x 533.4 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
106
Nr. 		538.48
mm 		6.4
mm 		Fibreglass
 Black
 1190024 | B-XL-0106-0064-NFB --- Belts - 106 Teeth x 538.48 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0106-0064-NFB Belts - 106 Teeth x 538.48 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
106
Nr. 		538.48
mm 		6.4
mm 		1190024 | B-XL-0106-0064-NFB --- Belts - 106 Teeth x 538.48 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0106-0064-NFB Belts - 106 Teeth x 538.48 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
107
Nr. 		543.56
mm 		6.4
mm 		Fibreglass
 Black
 1190119 | B-XL-0107-0064-NFB --- Belts - 107 Teeth x 543.56 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0107-0064-NFB Belts - 107 Teeth x 543.56 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.86 AUD
$5.86 AUD
Each
107
Nr. 		543.56
mm 		6.4
mm 		1190119 | B-XL-0107-0064-NFB --- Belts - 107 Teeth x 543.56 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0107-0064-NFB Belts - 107 Teeth x 543.56 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.86 AUD
$5.86 AUD
Each
108
Nr. 		548.64
mm 		6.4
mm 		Fibreglass
 Black
 1190485 | B-XL-0108-0064-NFB --- Belts - 108 Teeth x 548.64 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0108-0064-NFB Belts - 108 Teeth x 548.64 mm x 6.4 mm
4 Available
| Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
108
Nr. 		548.64
mm 		6.4
mm 		1190485 | B-XL-0108-0064-NFB --- Belts - 108 Teeth x 548.64 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0108-0064-NFB Belts - 108 Teeth x 548.64 mm x 6.4 mm
4 Available
| | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
109
Nr. 		553.72
mm 		6.4
mm 		Fibreglass
 Black
 1190618 | B-XL-0109-0064-NFB --- Belts - 109 Teeth x 553.72 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0109-0064-NFB Belts - 109 Teeth x 553.72 mm x 6.4 mm
4 Available
| Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
109
Nr. 		553.72
mm 		6.4
mm 		1190618 | B-XL-0109-0064-NFB --- Belts - 109 Teeth x 553.72 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0109-0064-NFB Belts - 109 Teeth x 553.72 mm x 6.4 mm
4 Available
| | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
110
Nr. 		558.8
mm 		6.4
mm 		Fibreglass
 Black
 1191295 | B-XL-0110-0064-NFB --- Belts - 110 Teeth x 558.8 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0110-0064-NFB Belts - 110 Teeth x 558.8 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
110
Nr. 		558.8
mm 		6.4
mm 		1191295 | B-XL-0110-0064-NFB --- Belts - 110 Teeth x 558.8 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0110-0064-NFB Belts - 110 Teeth x 558.8 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
111
Nr. 		563.88
mm 		6.4
mm 		Fibreglass
 Black
 Cinghia dentata 111 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 111 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 111 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
111
Nr. 		563.88
mm 		6.4
mm 		Cinghia dentata 111 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 111 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 111 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
112
Nr. 		568.96
mm 		6.4
mm 		Fibreglass
 Black
 Cinghia dentata 112 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 112 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 112 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
112
Nr. 		568.96
mm 		6.4
mm 		Cinghia dentata 112 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 112 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 112 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
113
Nr. 		574.04
mm 		6.4
mm 		Fibreglass
 Black
 Cinghia dentata 113 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 113 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 113 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
113
Nr. 		574.04
mm 		6.4
mm 		Cinghia dentata 113 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 113 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 113 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
114
Nr. 		579.12
mm 		6.4
mm 		Fibreglass
 Black
 1192082 | B-XL-0114-0064-NFB --- Belts - 114 Teeth x 579.12 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0114-0064-NFB Belts - 114 Teeth x 579.12 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
114
Nr. 		579.12
mm 		6.4
mm 		1192082 | B-XL-0114-0064-NFB --- Belts - 114 Teeth x 579.12 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0114-0064-NFB Belts - 114 Teeth x 579.12 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
115
Nr. 		584.2
mm 		6.4
mm 		Fibreglass
 Black
 1192560 | B-XL-0115-0064-NFB --- Belts - 115 Teeth x 584.2 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0115-0064-NFB Belts - 115 Teeth x 584.2 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
115
Nr. 		584.2
mm 		6.4
mm 		1192560 | B-XL-0115-0064-NFB --- Belts - 115 Teeth x 584.2 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0115-0064-NFB Belts - 115 Teeth x 584.2 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
116
Nr. 		589.28
mm 		6.4
mm 		Fibreglass
 Black
 1192728 | B-XL-0116-0064-NFB (5 Pcs) --- Belts - 116 Teeth x 589.28 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0116-0064-NFB (5 Pcs) Belts - 116 Teeth x 589.28 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$18.14 AUD
$18.14 AUD
Per 5
116
Nr. 		589.28
mm 		6.4
mm 		1192728 | B-XL-0116-0064-NFB (5 Pcs) --- Belts - 116 Teeth x 589.28 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0116-0064-NFB (5 Pcs) Belts - 116 Teeth x 589.28 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$18.14 AUD
$18.14 AUD
Per 5
117
Nr. 		594.36
mm 		6.4
mm 		Fibreglass
 Black
 1192819 | B-XL-0117-0064-NFB --- Belts - 117 Teeth x 594.36 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0117-0064-NFB Belts - 117 Teeth x 594.36 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
117
Nr. 		594.36
mm 		6.4
mm 		1192819 | B-XL-0117-0064-NFB --- Belts - 117 Teeth x 594.36 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1003 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0117-0064-NFB Belts - 117 Teeth x 594.36 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each