Belts - Inch Timing - 2.032mm Pitch MXL - 6.4mm Wide - Single Sided

325 Products in this selection
  • Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 6.35mm (1/4 inch) widths +/- 0.2mm
  • Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
  • Tooth Length (T) - 0.76mm.
  • Tooth Height (H) - 0.46mm.
  • Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm.
  • Pitch (P) - 2.032mm (0.08 inch)
Additional resources:
Timing Belts Catalogue PDF
Timing Pulleys Catalogue
Teeth Length Width Reinforcement Appearance Indicative
Image
318
Nr. 		646.176
mm 		6.4
mm 		Fibreglass
 Black
 1215780 | B-MXL-0318-0064-NFB --- Belts - 318 Teeth x 646.176 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0318-0064-NFB Belts - 318 Teeth x 646.176 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.59 AUD
$6.59 AUD
Each
Teeth Length Width Indicative
Image
318
Nr. 		646.176
mm 		6.4
mm 		1215780 | B-MXL-0318-0064-NFB --- Belts - 318 Teeth x 646.176 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0318-0064-NFB Belts - 318 Teeth x 646.176 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.59 AUD
$6.59 AUD
Each
320
Nr. 		650.24
mm 		6.4
mm 		Fibreglass
 Black
 1215937 | B-MXL-0320-0064-NFB --- Belts - 320 Teeth x 650.24 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0320-0064-NFB Belts - 320 Teeth x 650.24 mm x 6.4 mm
13 Available
| Backorders for more can be expected around Fri, Jan 10, 2025
$6.05 AUD
$6.05 AUD
Each
320
Nr. 		650.24
mm 		6.4
mm 		1215937 | B-MXL-0320-0064-NFB --- Belts - 320 Teeth x 650.24 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0320-0064-NFB Belts - 320 Teeth x 650.24 mm x 6.4 mm
13 Available
| | Backorders for more can be expected around Fri, Jan 10, 2025
$6.05 AUD
$6.05 AUD
Each
322
Nr. 		654.304
mm 		6.4
mm 		Fibreglass
 Black
 1216004 | B-MXL-0322-0064-NFB --- Belts - 322 Teeth x 654.304 mm x 6.4 mm
Material: Nylon Covered Neoprene    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0322-0064-NFB Belts - 322 Teeth x 654.304 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.23 AUD
$6.23 AUD
Each
322
Nr. 		654.304
mm 		6.4
mm 		1216004 | B-MXL-0322-0064-NFB --- Belts - 322 Teeth x 654.304 mm x 6.4 mm
Material: Nylon Covered Neoprene    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0322-0064-NFB Belts - 322 Teeth x 654.304 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.23 AUD
$6.23 AUD
Each
323
Nr. 		656.336
mm 		6.4
mm 		Fibreglass
 Black
 1216023 | B-MXL-0323-0064-NFB --- Belts - 323 Teeth x 656.336 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0323-0064-NFB Belts - 323 Teeth x 656.336 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.68 AUD
$6.68 AUD
Each
323
Nr. 		656.336
mm 		6.4
mm 		1216023 | B-MXL-0323-0064-NFB --- Belts - 323 Teeth x 656.336 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0323-0064-NFB Belts - 323 Teeth x 656.336 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.68 AUD
$6.68 AUD
Each
324
Nr. 		658.368
mm 		6.4
mm 		Fibreglass
 Black
 1216061 | B-MXL-0324-0064-NFB --- Belts - 324 Teeth x 658.368 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0324-0064-NFB Belts - 324 Teeth x 658.368 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.59 AUD
$5.59 AUD
Each
324
Nr. 		658.368
mm 		6.4
mm 		1216061 | B-MXL-0324-0064-NFB --- Belts - 324 Teeth x 658.368 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0324-0064-NFB Belts - 324 Teeth x 658.368 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.59 AUD
$5.59 AUD
Each
325
Nr. 		660.4
mm 		6.4
mm 		Fibreglass
 Black
 1216110 | B-MXL-0325-0064-NFB --- Belts - 325 Teeth x 660.4 mm x 6.4 mm
Material: Nylon Covered Neoprene    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0325-0064-NFB Belts - 325 Teeth x 660.4 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
325
Nr. 		660.4
mm 		6.4
mm 		1216110 | B-MXL-0325-0064-NFB --- Belts - 325 Teeth x 660.4 mm x 6.4 mm
Material: Nylon Covered Neoprene    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0325-0064-NFB Belts - 325 Teeth x 660.4 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
326
Nr. 		662.432
mm 		6.4
mm 		Fibreglass
 Black
 1216146 | B-MXL-0326-0064-NFB --- Belts - 326 Teeth x 662.432 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0326-0064-NFB Belts - 326 Teeth x 662.432 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.68 AUD
$6.68 AUD
Each
326
Nr. 		662.432
mm 		6.4
mm 		1216146 | B-MXL-0326-0064-NFB --- Belts - 326 Teeth x 662.432 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0326-0064-NFB Belts - 326 Teeth x 662.432 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.68 AUD
$6.68 AUD
Each
328
Nr. 		666.496
mm 		6.4
mm 		Fibreglass
 Black
 1216195 | B-MXL-0328-0064-NFB --- Belts - 328 Teeth x 666.496 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0328-0064-NFB Belts - 328 Teeth x 666.496 mm x 6.4 mm
2 Available
| Backorders for more can be expected around Fri, Jan 10, 2025
$7.23 AUD
$7.23 AUD
Each
328
Nr. 		666.496
mm 		6.4
mm 		1216195 | B-MXL-0328-0064-NFB --- Belts - 328 Teeth x 666.496 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0328-0064-NFB Belts - 328 Teeth x 666.496 mm x 6.4 mm
2 Available
| | Backorders for more can be expected around Fri, Jan 10, 2025
$7.23 AUD
$7.23 AUD
Each
330
Nr. 		670.56
mm 		6.4
mm 		Fibreglass
 Black
 1216284 | B-MXL-0330-0064-NFB --- Belts - 330 Teeth x 670.56 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0330-0064-NFB Belts - 330 Teeth x 670.56 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.77 AUD
$5.77 AUD
Each
330
Nr. 		670.56
mm 		6.4
mm 		1216284 | B-MXL-0330-0064-NFB --- Belts - 330 Teeth x 670.56 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0330-0064-NFB Belts - 330 Teeth x 670.56 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.77 AUD
$5.77 AUD
Each
332
Nr. 		674.624
mm 		6.4
mm 		Fibreglass
 Black
 1216335 | B-MXL-0332-0064-NFB --- Belts - 332 Teeth x 674.624 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0332-0064-NFB Belts - 332 Teeth x 674.624 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$12.86 AUD
$12.86 AUD
Each
332
Nr. 		674.624
mm 		6.4
mm 		1216335 | B-MXL-0332-0064-NFB --- Belts - 332 Teeth x 674.624 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0332-0064-NFB Belts - 332 Teeth x 674.624 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$12.86 AUD
$12.86 AUD
Each
333
Nr. 		676.656
mm 		6.4
mm 		Fibre Glass
 Black
 1216351 | B-MXL-0333-0064-NFB --- Belts - 333 Teeth x 676.656 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords   
Part Number: B-MXL-0333-0064-NFB Belts - 333 Teeth x 676.656 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.95 AUD
$6.95 AUD
Each
333
Nr. 		676.656
mm 		6.4
mm 		1216351 | B-MXL-0333-0064-NFB --- Belts - 333 Teeth x 676.656 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibre Glass    Appearance: Black   
Part Number: B-MXL-0333-0064-NFB Belts - 333 Teeth x 676.656 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.95 AUD
$6.95 AUD
Each
334
Nr. 		678.688
mm 		6.4
mm 		Fibreglass
 Black
 1216365 | B-MXL-0334-0064-NFB --- Belts - 334 Teeth x 678.688 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0334-0064-NFB Belts - 334 Teeth x 678.688 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$12.86 AUD
$12.86 AUD
Each
334
Nr. 		678.688
mm 		6.4
mm 		1216365 | B-MXL-0334-0064-NFB --- Belts - 334 Teeth x 678.688 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0334-0064-NFB Belts - 334 Teeth x 678.688 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$12.86 AUD
$12.86 AUD
Each
335
Nr. 		680.72
mm 		6.4
mm 		Fibreglass
 Black
 1216398 | B-MXL-0335-0064-NFB --- Belts - 335 Teeth x 680.72 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 486 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C   
Part Number: B-MXL-0335-0064-NFB Belts - 335 Teeth x 680.72 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$12.86 AUD
$12.86 AUD
Each
335
Nr. 		680.72
mm 		6.4
mm 		1216398 | B-MXL-0335-0064-NFB --- Belts - 335 Teeth x 680.72 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 486 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C   
Part Number: B-MXL-0335-0064-NFB Belts - 335 Teeth x 680.72 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$12.86 AUD
$12.86 AUD
Each
336
Nr. 		682.752
mm 		6.4
mm 		Fibreglass
 Black
 1216422 | B-MXL-0336-0064-NFB --- Belts - 336 Teeth x 682.752 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0336-0064-NFB Belts - 336 Teeth x 682.752 mm x 6.4 mm
5 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$13.86 AUD
$13.86 AUD
Each
336
Nr. 		682.752
mm 		6.4
mm 		1216422 | B-MXL-0336-0064-NFB --- Belts - 336 Teeth x 682.752 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0336-0064-NFB Belts - 336 Teeth x 682.752 mm x 6.4 mm
5 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$13.86 AUD
$13.86 AUD
Each
337
Nr. 		684.784
mm 		6.4
mm 		Fibreglass
 Black
 Cinghia dentata 337 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 337 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 337 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$14.50 AUD
$14.50 AUD
Each
337
Nr. 		684.784
mm 		6.4
mm 		Cinghia dentata 337 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 337 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 337 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$14.50 AUD
$14.50 AUD
Each
339
Nr. 		688.848
mm 		6.4
mm 		Fibreglass
 Black
 Cinghia dentata 339 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 339 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 339 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.95 AUD
$6.95 AUD
Each
339
Nr. 		688.848
mm 		6.4
mm 		Cinghia dentata 339 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 339 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 339 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.95 AUD
$6.95 AUD
Each
340
Nr. 		690.88
mm 		6.4
mm 		Fibreglass
 Black
 Cinghia dentata 340 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 340 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 340 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$14.32 AUD
$14.32 AUD
Each
340
Nr. 		690.88
mm 		6.4
mm 		Cinghia dentata 340 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 432 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 340 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 340 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$14.32 AUD
$14.32 AUD
Each
343
Nr. 		696.976
mm 		6.4
mm 		Fibreglass
 Black
 Cinghia dentata 343 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 343 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 343 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$14.32 AUD
$14.32 AUD
Each
343
Nr. 		696.976
mm 		6.4
mm 		Cinghia dentata 343 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 343 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 343 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$14.32 AUD
$14.32 AUD
Each
346
Nr. 		703.072
mm 		6.4
mm 		Fibre Glass
 Black
 1216773 | B-MXL-0346-0064-NFB --- Belts - 346 Teeth x 703.072 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords   
Part Number: B-MXL-0346-0064-NFB Belts - 346 Teeth x 703.072 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.86 AUD
$6.86 AUD
Each
346
Nr. 		703.072
mm 		6.4
mm 		1216773 | B-MXL-0346-0064-NFB --- Belts - 346 Teeth x 703.072 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibre Glass    Appearance: Black   
Part Number: B-MXL-0346-0064-NFB Belts - 346 Teeth x 703.072 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.86 AUD
$6.86 AUD
Each
347
Nr. 		705.104
mm 		6.4
mm 		Fibreglass
 Black
 Cinghia dentata 347 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 347 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 347 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.23 AUD
$8.23 AUD
Each
347
Nr. 		705.104
mm 		6.4
mm 		Cinghia dentata 347 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 347 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 347 denti larga 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.23 AUD
$8.23 AUD
Each
350
Nr. 		711.2
mm 		6.4
mm 		Fibreglass
 Black
 Cinghia dentata 350 denti larghezza 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 350 denti larghezza 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 350 denti larghezza 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
350
Nr. 		711.2
mm 		6.4
mm 		Cinghia dentata 350 denti larghezza 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 350 denti larghezza 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 350 denti larghezza 6,4 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
354
Nr. 		719.328
mm 		6.4
mm 		Fibreglass
 Black
 1217008 | B-MXL-0354-0064-NFB --- Belts - 354 Teeth x 719.328 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0354-0064-NFB Belts - 354 Teeth x 719.328 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$16.32 AUD
$16.32 AUD
Each
354
Nr. 		719.328
mm 		6.4
mm 		1217008 | B-MXL-0354-0064-NFB --- Belts - 354 Teeth x 719.328 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0354-0064-NFB Belts - 354 Teeth x 719.328 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$16.32 AUD
$16.32 AUD
Each
355
Nr. 		721.36
mm 		6.4
mm 		Fibreglass
 Black
 1217068 | B-MXL-0355-0064-NFB --- Belts - 355 Teeth x 721.36 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0355-0064-NFB Belts - 355 Teeth x 721.36 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$14.50 AUD
$14.50 AUD
Each
355
Nr. 		721.36
mm 		6.4
mm 		1217068 | B-MXL-0355-0064-NFB --- Belts - 355 Teeth x 721.36 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0355-0064-NFB Belts - 355 Teeth x 721.36 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$14.50 AUD
$14.50 AUD
Each
358
Nr. 		727.456
mm 		6.4
mm 		Fibreglass
 Black
 1217158 | B-MXL-0358-0064-NFB --- Belts - 358 Teeth x 727.456 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0358-0064-NFB Belts - 358 Teeth x 727.456 mm x 6.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$14.05 AUD
$14.05 AUD
Each
358
Nr. 		727.456
mm 		6.4
mm 		1217158 | B-MXL-0358-0064-NFB --- Belts - 358 Teeth x 727.456 mm x 6.4 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 457 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0358-0064-NFB Belts - 358 Teeth x 727.456 mm x 6.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$14.05 AUD
$14.05 AUD
Each