Screws - Thumb - Wing

13 Products in this selection
This is a combined category of Wing Thumb Screws.
Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Additional resources:
Thumb Screws and Nuts PDF Quick Guide
PDF Screws Catalogue
Nuts
Thread Size (C) Thread Length (Tl) Overall Length (L) Head Diameter (A) Head Height (H) Indicative
Image
1/4-20 UNC (6.35mm)
12.70
mm 		33.34
mm 		31.75
mm 		20.64
mm 		Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1)
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$8.86 AUD
$8.86 AUD
Each
Thread Size (C) Thread Length (Tl) Overall Length (L) Indicative
Image
1/4-20 UNC (6.35mm)
12.70
mm 		33.34
mm 		Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$8.86 AUD
$8.86 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
19.05
mm 		39.69
mm 		31.75
mm 		20.64
mm 		Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1)
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$13.14 AUD
$13.14 AUD
Each
1/4-20 UNC (6.35mm)
19.05
mm 		39.69
mm 		Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$13.14 AUD
$13.14 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
25.40
mm 		46.04
mm 		31.75
mm 		20.64
mm 		Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1)
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$9.23 AUD
$9.23 AUD
Each
1/4-20 UNC (6.35mm)
25.40
mm 		46.04
mm 		Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$9.23 AUD
$9.23 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
38.10
mm 		58.74
mm 		31.75
mm 		20.64
mm 		Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1)
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$13.41 AUD
$13.41 AUD
Each
1/4-20 UNC (6.35mm)
38.10
mm 		58.74
mm 		Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable – Face de rondelle à ailettes – MBA (lot de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$13.41 AUD
$13.41 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
50.80
mm 		71.44
mm 		31.75
mm 		20.64
mm 		1075022 | THS064C-051-W-CS-WF --- Thumb Screws - 1/4-20 UNC (6.35mm) x 50.8 mm x 71.44 mm
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-051-W-CS-WF Thumb Screws - 1/4-20 UNC (6.35mm) x 50.8 mm x 71.44 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$14.41 AUD
$14.41 AUD
Each
1/4-20 UNC (6.35mm)
50.80
mm 		71.44
mm 		1075022 | THS064C-051-W-CS-WF --- Thumb Screws - 1/4-20 UNC (6.35mm) x 50.8 mm x 71.44 mm
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-051-W-CS-WF Thumb Screws - 1/4-20 UNC (6.35mm) x 50.8 mm x 71.44 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$14.41 AUD
$14.41 AUD
Each
View the product page first if you are unsure.
5/16-18 UNC (7.94mm)
19.05
mm 		38.10
mm 		44.45
mm 		19.05
mm 		1078782 | THS079C-019-W-CS --- Thumb Screws - 5/16-18 UNC (7.94mm) x 19.05 mm x 38.1 mm
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-019-W-CS Thumb Screws - 5/16-18 UNC (7.94mm) x 19.05 mm x 38.1 mm
2 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
$14.23 AUD
$14.23 AUD
Each
5/16-18 UNC (7.94mm)
19.05
mm 		38.10
mm 		1078782 | THS079C-019-W-CS --- Thumb Screws - 5/16-18 UNC (7.94mm) x 19.05 mm x 38.1 mm
Material: Steel    Head Diameter (A): 44.45 mm    Head Height (H): 19.05 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-019-W-CS Thumb Screws - 5/16-18 UNC (7.94mm) x 19.05 mm x 38.1 mm
2 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
$14.23 AUD
$14.23 AUD
Each
View the product page first if you are unsure.
5/16-18 UNC (7.94mm)
25.40
mm 		44.45
mm 		44.45
mm 		19.05
mm 		1078942 | THS079C-025-W-CS --- Thumb Screws - 5/16-18 UNC (7.94mm) x 25.4 mm x 44.45 mm
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-025-W-CS Thumb Screws - 5/16-18 UNC (7.94mm) x 25.4 mm x 44.45 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$15.05 AUD
$15.05 AUD
Each
5/16-18 UNC (7.94mm)
25.40
mm 		44.45
mm 		1078942 | THS079C-025-W-CS --- Thumb Screws - 5/16-18 UNC (7.94mm) x 25.4 mm x 44.45 mm
Material: Steel    Head Diameter (A): 44.45 mm    Head Height (H): 19.05 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-025-W-CS Thumb Screws - 5/16-18 UNC (7.94mm) x 25.4 mm x 44.45 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$15.05 AUD
$15.05 AUD
Each
View the product page first if you are unsure.
5/16-18 UNC (7.94mm)
38.10
mm 		57.15
mm 		44.45
mm 		19.05
mm 		1079127 | THS079C-038-W-CS --- Thumb Screws - 5/16-18 UNC (7.94mm) x 38.1 mm x 57.15 mm
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-038-W-CS Thumb Screws - 5/16-18 UNC (7.94mm) x 38.1 mm x 57.15 mm
2 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
$15.32 AUD
$15.32 AUD
Each
5/16-18 UNC (7.94mm)
38.10
mm 		57.15
mm 		1079127 | THS079C-038-W-CS --- Thumb Screws - 5/16-18 UNC (7.94mm) x 38.1 mm x 57.15 mm
Material: Steel    Head Diameter (A): 44.45 mm    Head Height (H): 19.05 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-038-W-CS Thumb Screws - 5/16-18 UNC (7.94mm) x 38.1 mm x 57.15 mm
2 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
$15.32 AUD
$15.32 AUD
Each
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
19.05
mm 		41.28
mm 		46.04
mm 		22.23
mm 		Vis à oreilles 3/8-16 UNC x 19,05 mm Acier - Aile - MBA (Pack de 1)
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vis à oreilles 3/8-16 UNC x 19,05 mm Acier - Aile - MBA (Pack de 1) Vis à oreilles 3/8-16 UNC x 19,05 mm Acier - Aile - MBA (Pack de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$17.41 AUD
$17.41 AUD
Each
3/8-16 UNC (9.53mm)
19.05
mm 		41.28
mm 		Vis à oreilles 3/8-16 UNC x 19,05 mm Acier - Aile - MBA (Pack de 1)
Material: Steel    Head Diameter (A): 46.04 mm    Head Height (H): 22.23 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vis à oreilles 3/8-16 UNC x 19,05 mm Acier - Aile - MBA (Pack de 1) Vis à oreilles 3/8-16 UNC x 19,05 mm Acier - Aile - MBA (Pack de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$17.41 AUD
$17.41 AUD
Each
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
25.40
mm 		47.63
mm 		46.04
mm 		22.23
mm 		Vis à oreilles 3/8-16 UNC x 25,4 mm Acier - Aile - MBA (Pack de 50)
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vis à oreilles 3/8-16 UNC x 25,4 mm Acier - Aile - MBA (Pack de 50) Vis à oreilles 3/8-16 UNC x 25,4 mm Acier - Aile - MBA (Pack de 50) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$1,155.68 AUD
$1,155.68 AUD
Per 50
3/8-16 UNC (9.53mm)
25.40
mm 		47.63
mm 		Vis à oreilles 3/8-16 UNC x 25,4 mm Acier - Aile - MBA (Pack de 50)
Material: Steel    Head Diameter (A): 46.04 mm    Head Height (H): 22.23 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vis à oreilles 3/8-16 UNC x 25,4 mm Acier - Aile - MBA (Pack de 50) Vis à oreilles 3/8-16 UNC x 25,4 mm Acier - Aile - MBA (Pack de 50) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$1,155.68 AUD
$1,155.68 AUD
Per 50
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
25.40
mm 		50.80
mm 		36.51
mm 		25.40
mm 		Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à ailettes - MBA (Paquet de 50)
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à ailettes - MBA (Paquet de 50) Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à ailettes - MBA (Paquet de 50) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$1,032.41 AUD
$1,032.41 AUD
Per 50
3/8-16 UNC (9.53mm)
25.40
mm 		50.80
mm 		Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à ailettes - MBA (Paquet de 50)
Material: Malleable Iron    Head Diameter (A): 36.51 mm    Head Height (H): 25.40 mm    Finish: Tumbled    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à ailettes - MBA (Paquet de 50) Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à ailettes - MBA (Paquet de 50) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$1,032.41 AUD
$1,032.41 AUD
Per 50
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
38.10
mm 		60.33
mm 		46.04
mm 		22.23
mm 		Vis à oreilles 3/8-16 UNC x 38,1 mm Acier - Aile - MBA (Pack de 1)
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vis à oreilles 3/8-16 UNC x 38,1 mm Acier - Aile - MBA (Pack de 1) Vis à oreilles 3/8-16 UNC x 38,1 mm Acier - Aile - MBA (Pack de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$17.41 AUD
$17.41 AUD
Each
3/8-16 UNC (9.53mm)
38.10
mm 		60.33
mm 		Vis à oreilles 3/8-16 UNC x 38,1 mm Acier - Aile - MBA (Pack de 1)
Material: Steel    Head Diameter (A): 46.04 mm    Head Height (H): 22.23 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vis à oreilles 3/8-16 UNC x 38,1 mm Acier - Aile - MBA (Pack de 1) Vis à oreilles 3/8-16 UNC x 38,1 mm Acier - Aile - MBA (Pack de 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$17.41 AUD
$17.41 AUD
Each
View the product page first if you are unsure.
1/2-13 UNC (12.7mm)
76.20
mm 		101.60
mm 		57.15
mm 		25.40
mm 		1104682 | THS127C-076-W-CS --- Thumb Screws - 1/2-13 UNC (12.7mm) x 76.2 mm x 101.6 mm
Material: Steel    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS127C-076-W-CS Thumb Screws - 1/2-13 UNC (12.7mm) x 76.2 mm x 101.6 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$28.95 AUD
$28.95 AUD
Each
1/2-13 UNC (12.7mm)
76.20
mm 		101.60
mm 		1104682 | THS127C-076-W-CS --- Thumb Screws - 1/2-13 UNC (12.7mm) x 76.2 mm x 101.6 mm
Material: Steel    Head Diameter (A): 57.15 mm    Head Height (H): 25.40 mm    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS127C-076-W-CS Thumb Screws - 1/2-13 UNC (12.7mm) x 76.2 mm x 101.6 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$28.95 AUD
$28.95 AUD
Each
View the product page first if you are unsure.