Screws - Thumb - Flat Key Head - Washer Face - Steel

Screws - Thumb Screws - Thumb - Flat Key Head Screws - Thumb - Flat Key Head - Washer Face   Screws - Thumb - Flat Key Head - Washer Face - Steel
11 Products In this Selection

Flat Key head malleable iron screws with an integral washer

Thread Size Thread Length (D) Overall Length (C) Head Diameter (A) Head Height (B) Indicative
Image
1/4-20 UNC (6.35mm)
 12.70
mm 		28.58
mm 		20.64
mm 		15.88
mm 		Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable - tête de clé plate - MBA (paquet de 50)
Material: Malleable Iron    Finish: Tumbled    Washer Diameter (E): 11.11 mm   
Part Number: Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable - tête de clé plate - MBA (paquet de 50) Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable - tête de clé plate - MBA (paquet de 50) / Screws
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$685.23 AUD
$685.23 AUD
Per 50
Thread Size Thread Length (D) Overall Length (C) Indicative
Image
1/4-20 UNC (6.35mm)
 12.70
mm 		28.58
mm 		Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable - tête de clé plate - MBA (paquet de 50)
Material: Malleable Iron    Head Diameter (A): 20.64 mm    Head Height (B): 15.88 mm    Finish: Tumbled    Washer Diameter (E): 11.11 mm   
Part Number: Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable - tête de clé plate - MBA (paquet de 50) Vis à oreilles 1/4-20 UNC x 12,70 mm en fonte malléable - tête de clé plate - MBA (paquet de 50) / Screws
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$685.23 AUD
$685.23 AUD
Per 50
1/4-20 UNC (6.35mm)
 19.05
mm 		34.93
mm 		20.64
mm 		15.88
mm 		Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable - tête de clé plate - MBA (lot de 1)
Material: Malleable Iron    Finish: Tumbled    Washer Diameter (E): 11.11 mm   
Part Number: Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable - tête de clé plate - MBA (lot de 1) Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable - tête de clé plate - MBA (lot de 1) / Screws
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$10.77 AUD
$10.77 AUD
Per Each
1/4-20 UNC (6.35mm)
 19.05
mm 		34.93
mm 		Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable - tête de clé plate - MBA (lot de 1)
Material: Malleable Iron    Head Diameter (A): 20.64 mm    Head Height (B): 15.88 mm    Finish: Tumbled    Washer Diameter (E): 11.11 mm   
Part Number: Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable - tête de clé plate - MBA (lot de 1) Vis à oreilles 1/4-20 UNC x 19,05 mm en fonte malléable - tête de clé plate - MBA (lot de 1) / Screws
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$10.77 AUD
$10.77 AUD
Per Each
1/4-20 UNC (6.35mm)
 25.40
mm 		41.28
mm 		20.64
mm 		15.88
mm 		Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1)
Material: Malleable Iron    Finish: Tumbled    Washer Diameter (E): 11.11 mm   
Part Number: Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1) Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1) / Screws
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$10.68 AUD
$10.68 AUD
Per Each
1/4-20 UNC (6.35mm)
 25.40
mm 		41.28
mm 		Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1)
Material: Malleable Iron    Head Diameter (A): 20.64 mm    Head Height (B): 15.88 mm    Finish: Tumbled    Washer Diameter (E): 11.11 mm   
Part Number: Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1) Vis à oreilles 1/4-20 UNC x 25,4 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1) / Screws
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$10.68 AUD
$10.68 AUD
Per Each
1/4-20 UNC (6.35mm)
 38.10
mm 		53.98
mm 		20.64
mm 		15.88
mm 		Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1)
Material: Malleable Iron    Finish: Tumbled    Washer Diameter (E): 11.11 mm   
Part Number: Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1) Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1) / Screws
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$11.86 AUD
$11.86 AUD
Per Each
1/4-20 UNC (6.35mm)
 38.10
mm 		53.98
mm 		Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1)
Material: Malleable Iron    Head Diameter (A): 20.64 mm    Head Height (B): 15.88 mm    Finish: Tumbled    Washer Diameter (E): 11.11 mm   
Part Number: Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1) Vis à oreilles 1/4-20 UNC x 38,1 mm en fonte malléable - Tête de clé plate - MBA (Pack de 1) / Screws
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$11.86 AUD
$11.86 AUD
Per Each
1/4-20 UNC (6.35mm)
 50.80
mm 		66.68
mm 		20.64
mm 		15.88
mm 		1075079 | THS064C-051-F-CS-WF --- Screws - 50.8 mm x 66.68 mm
Material: Malleable Iron    Finish: Tumbled    Washer Diameter (E): 11.11 mm   
Part Number: THS064C-051-F-CS-WF Screws - 50.8 mm x 66.68 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$12.77 AUD
$12.77 AUD
Per Each
1/4-20 UNC (6.35mm)
 50.80
mm 		66.68
mm 		1075079 | THS064C-051-F-CS-WF --- Screws - 50.8 mm x 66.68 mm
Material: Malleable Iron    Head Diameter (A): 20.64 mm    Head Height (B): 15.88 mm    Finish: Tumbled    Washer Diameter (E): 11.11 mm   
Part Number: THS064C-051-F-CS-WF Screws - 50.8 mm x 66.68 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$12.77 AUD
$12.77 AUD
Per Each
5/16-18 UNC (7.938mm)
 19.05
mm 		39.69
mm 		25.40
mm 		20.64
mm 		1078868 | THS079C-019-F-CS-WF --- Screws - 19.05 mm x 39.69 mm
Material: Malleable Iron    Finish: Tumbled    Washer Diameter (E): 14.29 mm   
Part Number: THS079C-019-F-CS-WF Screws - 19.05 mm x 39.69 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$17.59 AUD
$17.59 AUD
Per Each
5/16-18 UNC (7.938mm)
 19.05
mm 		39.69
mm 		1078868 | THS079C-019-F-CS-WF --- Screws - 19.05 mm x 39.69 mm
Material: Malleable Iron    Head Diameter (A): 25.40 mm    Head Height (B): 20.64 mm    Finish: Tumbled    Washer Diameter (E): 14.29 mm   
Part Number: THS079C-019-F-CS-WF Screws - 19.05 mm x 39.69 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$17.59 AUD
$17.59 AUD
Per Each
5/16-18 UNC (7.938mm)
 38.10
mm 		58.74
mm 		25.40
mm 		20.64
mm 		1079206 | THS079C-038-F-CS-WF (50 Pcs) --- Screws - 38.1 mm x 58.74 mm
Material: Malleable Iron    Finish: Tumbled    Washer Diameter (E): 14.29 mm   
Part Number: THS079C-038-F-CS-WF (50 Pcs) Screws - 38.1 mm x 58.74 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$801.41 AUD
$801.41 AUD
Per 50
5/16-18 UNC (7.938mm)
 38.10
mm 		58.74
mm 		1079206 | THS079C-038-F-CS-WF (50 Pcs) --- Screws - 38.1 mm x 58.74 mm
Material: Malleable Iron    Head Diameter (A): 25.40 mm    Head Height (B): 20.64 mm    Finish: Tumbled    Washer Diameter (E): 14.29 mm   
Part Number: THS079C-038-F-CS-WF (50 Pcs) Screws - 38.1 mm x 58.74 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$801.41 AUD
$801.41 AUD
Per 50
3/8-16 UNC (9.525mm)
 12.70
mm 		34.93
mm 		31.75
mm 		22.23
mm 		Vis à oreilles 3/8-16 UNC x 12,70 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50)
Material: Malleable Iron    Finish: Tumbled    Washer Diameter (E): 15.88 mm   
Part Number: Vis à oreilles 3/8-16 UNC x 12,70 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50) Vis à oreilles 3/8-16 UNC x 12,70 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50) / Screws
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$1,072.59 AUD
$1,072.59 AUD
Per 50
3/8-16 UNC (9.525mm)
 12.70
mm 		34.93
mm 		Vis à oreilles 3/8-16 UNC x 12,70 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (B): 22.23 mm    Finish: Tumbled    Washer Diameter (E): 15.88 mm   
Part Number: Vis à oreilles 3/8-16 UNC x 12,70 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50) Vis à oreilles 3/8-16 UNC x 12,70 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50) / Screws
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$1,072.59 AUD
$1,072.59 AUD
Per 50
3/8-16 UNC (9.525mm)
 25.40
mm 		47.63
mm 		31.75
mm 		22.23
mm 		Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1)
Material: Malleable Iron    Finish: Tumbled    Washer Diameter (E): 15.88 mm   
Part Number: Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1) Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1) / Screws
10 Available
| Backorders for more can be expected around Sat, Nov 16, 2024
$16.86 AUD
$16.86 AUD
Per Each
3/8-16 UNC (9.525mm)
 25.40
mm 		47.63
mm 		Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (B): 22.23 mm    Finish: Tumbled    Washer Diameter (E): 15.88 mm   
Part Number: Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1) Vis à oreilles 3/8-16 UNC x 25,4 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1) / Screws
10 Available
| | Backorders for more can be expected around Sat, Nov 16, 2024
$16.86 AUD
$16.86 AUD
Per Each
3/8-16 UNC (9.525mm)
 50.80
mm 		73.03
mm 		31.75
mm 		22.23
mm 		Vis à oreilles 3/8-16 UNC x 50,80 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1)
Material: Malleable Iron    Finish: Tumbled    Washer Diameter (E): 15.88 mm   
Part Number: Vis à oreilles 3/8-16 UNC x 50,80 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1) Vis à oreilles 3/8-16 UNC x 50,80 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1) / Screws
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$16.77 AUD
$16.77 AUD
Per Each
3/8-16 UNC (9.525mm)
 50.80
mm 		73.03
mm 		Vis à oreilles 3/8-16 UNC x 50,80 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (B): 22.23 mm    Finish: Tumbled    Washer Diameter (E): 15.88 mm   
Part Number: Vis à oreilles 3/8-16 UNC x 50,80 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1) Vis à oreilles 3/8-16 UNC x 50,80 mm en fonte malléable - Face de rondelle à tête plate - MBA (Pack de 1) / Screws
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$16.77 AUD
$16.77 AUD
Per Each
1/2-13 UNC (12.7mm)
 19.05
mm 		47.63
mm 		36.51
mm 		28.58
mm 		Vis à oreilles 1/2-13 UNC x 19,05 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50)
Material: Malleable Iron    Finish: Tumbled    Washer Diameter (E): 19.05 mm   
Part Number: Vis à oreilles 1/2-13 UNC x 19,05 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50) Vis à oreilles 1/2-13 UNC x 19,05 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50) / Screws
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$1,454.77 AUD
$1,454.77 AUD
Per 50
1/2-13 UNC (12.7mm)
 19.05
mm 		47.63
mm 		Vis à oreilles 1/2-13 UNC x 19,05 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50)
Material: Malleable Iron    Head Diameter (A): 36.51 mm    Head Height (B): 28.58 mm    Finish: Tumbled    Washer Diameter (E): 19.05 mm   
Part Number: Vis à oreilles 1/2-13 UNC x 19,05 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50) Vis à oreilles 1/2-13 UNC x 19,05 mm en fonte malléable - Face de rondelle à tête plate - MBA (Paquet de 50) / Screws
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$1,454.77 AUD
$1,454.77 AUD
Per 50