Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide

18 Products in this selection

This is a combined category of products from 50mm Wide GT 8.000mm Pitch Metric Timing Pulleys. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Additional resources:
Timing Pulleys Catalogue PDF
GT 8mm Timing Belts
Teeth Max Belt Width Taperlock Indicative
Image
28
Nr. 		50.00
mm 		12.700
 1139151 | P-080G-028-500FF-SB-127U --- Pulleys - 28 Teeth x 50 mm x 12.7 mm
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (D): 71.27 mm    Flange Diameter (FD): 80.0 mm    Overall Length: 76.2 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Through Bore
Part Number: P-080G-028-500FF-SB-127U Pulleys - 28 Teeth x 50 mm x 12.7 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$287.05 AUD
$287.05 AUD
Each
Teeth Max Belt Width Taperlock Indicative
Image
28
Nr. 		50.00
mm 		12.700
 1139151 | P-080G-028-500FF-SB-127U --- Pulleys - 28 Teeth x 50 mm x 12.7 mm
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (D): 71.27 mm    Flange Diameter (FD): 80.0 mm    Overall Length: 76.2 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Through Bore
Part Number: P-080G-028-500FF-SB-127U Pulleys - 28 Teeth x 50 mm x 12.7 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$287.05 AUD
$287.05 AUD
Each
30
Nr. 		50.00
mm 		1210
 1142135 | P-080G-030-500FF-SB-T1210 --- Pulleys - 30 Teeth x 50 mm x 1210
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (D): 76.36 mm    Flange Diameter (FD): 85.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-030-500FF-SB-T1210 Pulleys - 30 Teeth x 50 mm x 1210
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$246.59 AUD
$246.59 AUD
Each
30
Nr. 		50.00
mm 		1210
 1142135 | P-080G-030-500FF-SB-T1210 --- Pulleys - 30 Teeth x 50 mm x 1210
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (D): 76.36 mm    Flange Diameter (FD): 85.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-030-500FF-SB-T1210 Pulleys - 30 Teeth x 50 mm x 1210
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$246.59 AUD
$246.59 AUD
Each
32
Nr. 		50.00
mm 		1210
 1145759 | P-080G-032-500FF-CB-T1210 --- Pulleys - 32 Teeth x 50 mm x 1210
Material: Cast Iron    Type: 2    Pitch Dia. (D): 81.45 mm    Flange Diameter (FD): 90.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-032-500FF-CB-T1210 Pulleys - 32 Teeth x 50 mm x 1210
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$261.95 AUD
$261.95 AUD
Each
32
Nr. 		50.00
mm 		1210
 1145759 | P-080G-032-500FF-CB-T1210 --- Pulleys - 32 Teeth x 50 mm x 1210
Material: Cast Iron    Type: 2    Pitch Dia. (D): 81.45 mm    Flange Diameter (FD): 90.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-032-500FF-CB-T1210 Pulleys - 32 Teeth x 50 mm x 1210
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$261.95 AUD
$261.95 AUD
Each
34
Nr. 		50.00
mm 		1610
 1146874 | P-080G-034-500FF-CB-T1610 --- Pulleys - 34 Teeth x 50 mm x 1610
Material: Cast Iron    Type: 2    Pitch Dia. (D): 86.54 mm    Flange Diameter (FD): 97.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-034-500FF-CB-T1610 Pulleys - 34 Teeth x 50 mm x 1610
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$287.05 AUD
$287.05 AUD
Each
34
Nr. 		50.00
mm 		1610
 1146874 | P-080G-034-500FF-CB-T1610 --- Pulleys - 34 Teeth x 50 mm x 1610
Material: Cast Iron    Type: 2    Pitch Dia. (D): 86.54 mm    Flange Diameter (FD): 97.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-034-500FF-CB-T1610 Pulleys - 34 Teeth x 50 mm x 1610
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$287.05 AUD
$287.05 AUD
Each
36
Nr. 		50.00
mm 		1610
 Poulie de distribution 36 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 91.63 mm    Flange Diameter (FD): 100.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 36 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 36 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$303.86 AUD
$303.86 AUD
Each
36
Nr. 		50.00
mm 		1610
 Poulie de distribution 36 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 91.63 mm    Flange Diameter (FD): 100.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 36 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 36 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$303.86 AUD
$303.86 AUD
Each
38
Nr. 		50.00
mm 		1610
 Poulie de distribution 38 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 96.72 mm    Flange Diameter (FD): 105.6 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 38 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 38 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$248.32 AUD
$248.32 AUD
Each
38
Nr. 		50.00
mm 		1610
 Poulie de distribution 38 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 96.72 mm    Flange Diameter (FD): 105.6 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 38 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 38 dents x 50 mm de large – Alésage Taperlock 1610 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$248.32 AUD
$248.32 AUD
Each
40
Nr. 		50.00
mm 		2012
 1153894 | P-080G-040-500FF-CB-T2012 --- Pulleys - 40 Teeth x 50 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (D): 101.81 mm    Flange Diameter (FD): 110.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-040-500FF-CB-T2012 Pulleys - 40 Teeth x 50 mm x 2012
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$310.05 AUD
$310.05 AUD
Each
40
Nr. 		50.00
mm 		2012
 1153894 | P-080G-040-500FF-CB-T2012 --- Pulleys - 40 Teeth x 50 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (D): 101.81 mm    Flange Diameter (FD): 110.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-040-500FF-CB-T2012 Pulleys - 40 Teeth x 50 mm x 2012
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$310.05 AUD
$310.05 AUD
Each
44
Nr. 		50.00
mm 		2012
 1156846 | P-080G-044-500FF-CB-T2012 --- Pulleys - 44 Teeth x 50 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (D): 111.99 mm    Flange Diameter (FD): 121.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-044-500FF-CB-T2012 Pulleys - 44 Teeth x 50 mm x 2012
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$360.23 AUD
$360.23 AUD
Each
44
Nr. 		50.00
mm 		2012
 1156846 | P-080G-044-500FF-CB-T2012 --- Pulleys - 44 Teeth x 50 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (D): 111.99 mm    Flange Diameter (FD): 121.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-044-500FF-CB-T2012 Pulleys - 44 Teeth x 50 mm x 2012
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$360.23 AUD
$360.23 AUD
Each
48
Nr. 		50.00
mm 		2012
 1160337 | P-080G-048-500FF-CB-T2012 --- Pulleys - 48 Teeth x 50 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (D): 122.18 mm    Flange Diameter (FD): 131.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-048-500FF-CB-T2012 Pulleys - 48 Teeth x 50 mm x 2012
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$431.41 AUD
$431.41 AUD
Each
48
Nr. 		50.00
mm 		2012
 1160337 | P-080G-048-500FF-CB-T2012 --- Pulleys - 48 Teeth x 50 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (D): 122.18 mm    Flange Diameter (FD): 131.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-048-500FF-CB-T2012 Pulleys - 48 Teeth x 50 mm x 2012
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$431.41 AUD
$431.41 AUD
Each
56
Nr. 		50.00
mm 		2517
 1166530 | P-080G-056-500FF-CB-T2517 --- Pulleys - 56 Teeth x 50 mm x 2517
Material: Cast Iron    Type: 2    Pitch Dia. (D): 142.54 mm    Flange Diameter (FD): 151.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-056-500FF-CB-T2517 Pulleys - 56 Teeth x 50 mm x 2517
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$528.41 AUD
$528.41 AUD
Each
56
Nr. 		50.00
mm 		2517
 1166530 | P-080G-056-500FF-CB-T2517 --- Pulleys - 56 Teeth x 50 mm x 2517
Material: Cast Iron    Type: 2    Pitch Dia. (D): 142.54 mm    Flange Diameter (FD): 151.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-056-500FF-CB-T2517 Pulleys - 56 Teeth x 50 mm x 2517
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$528.41 AUD
$528.41 AUD
Each
64
Nr. 		50.00
mm 		2517
 Poulie de distribution 64 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 162.90 mm    Flange Diameter (FD): 172.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 64 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 64 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$708.05 AUD
$708.05 AUD
Each
64
Nr. 		50.00
mm 		2517
 Poulie de distribution 64 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 162.90 mm    Flange Diameter (FD): 172.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 64 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 64 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$708.05 AUD
$708.05 AUD
Each
72
Nr. 		50.00
mm 		2517
 Poulie de distribution 72 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 183.26 mm    Flange Diameter (FD): 192.4 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 72 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 72 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$833.86 AUD
$833.86 AUD
Each
72
Nr. 		50.00
mm 		2517
 Poulie de distribution 72 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 183.26 mm    Flange Diameter (FD): 192.4 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 72 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 72 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$833.86 AUD
$833.86 AUD
Each
80
Nr. 		50.00
mm 		2517
 Poulie de distribution 80 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 203.63 mm    Flange Diameter (FD): 213.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 80 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 80 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$999.50 AUD
$999.50 AUD
Each
80
Nr. 		50.00
mm 		2517
 Poulie de distribution 80 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 203.63 mm    Flange Diameter (FD): 213.0 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 80 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 80 dents x 50 mm de large – Alésage Taperlock 2517 – Fonte – Double bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$999.50 AUD
$999.50 AUD
Each
90
Nr. 		50.00
mm 		3020
 1183708 | P-080G-090-500P-CB-T3020 --- Pulleys - 90 Teeth x 50 mm x 3020
Material: Cast Iron    Type: 2    Pitch Dia. (D): 229.08 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-090-500P-CB-T3020 Pulleys - 90 Teeth x 50 mm x 3020
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$1,125.68 AUD
$1,125.68 AUD
Each
90
Nr. 		50.00
mm 		3020
 1183708 | P-080G-090-500P-CB-T3020 --- Pulleys - 90 Teeth x 50 mm x 3020
Material: Cast Iron    Type: 2    Pitch Dia. (D): 229.08 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-090-500P-CB-T3020 Pulleys - 90 Teeth x 50 mm x 3020
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$1,125.68 AUD
$1,125.68 AUD
Each
90
Nr. 		85.00
mm 		3020
 1183750 | P-080G-090-850P-CB-T3020 --- Pulleys - 90 Teeth x 85 mm x 3020
Material: Cast Iron    Type: 2    Pitch Dia. (D): 229.08 mm    Overall Length: 95.3 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-090-850P-CB-T3020 Pulleys - 90 Teeth x 85 mm x 3020
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$1,351.05 AUD
$1,351.05 AUD
Each
90
Nr. 		85.00
mm 		3020
 1183750 | P-080G-090-850P-CB-T3020 --- Pulleys - 90 Teeth x 85 mm x 3020
Material: Cast Iron    Type: 2    Pitch Dia. (D): 229.08 mm    Overall Length: 95.3 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-090-850P-CB-T3020 Pulleys - 90 Teeth x 85 mm x 3020
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$1,351.05 AUD
$1,351.05 AUD
Each
112
Nr. 		50.00
mm 		3020
 Poulie de distribution 112 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 285.08 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 112 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 112 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$1,185.50 AUD
$1,185.50 AUD
Each
112
Nr. 		50.00
mm 		3020
 Poulie de distribution 112 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 285.08 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 112 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 112 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$1,185.50 AUD
$1,185.50 AUD
Each
144
Nr. 		50.00
mm 		3020
 Poulie de distribution 144 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 366.53 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 144 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 144 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$2,052.41 AUD
$2,052.41 AUD
Each
144
Nr. 		50.00
mm 		3020
 Poulie de distribution 144 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 366.53 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: Poulie de distribution 144 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1) Poulie de distribution 144 dents x 50 mm de large – Alésage Taperlock 3020 – Fonte – Sans bride – Pas courbe GT 8 mm – MBA (lot de 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$2,052.41 AUD
$2,052.41 AUD
Each
192
Nr. 		50.00
mm 		3020
 1207033 | P-080G-192-500P-CB-T3020 --- Pulleys - 192 Teeth x 50 mm x 3020
Material: Cast Iron    Type: 2    Pitch Dia. (D): 488.71 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-192-500P-CB-T3020 Pulleys - 192 Teeth x 50 mm x 3020
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$2,933.68 AUD
$2,933.68 AUD
Each
192
Nr. 		50.00
mm 		3020
 1207033 | P-080G-192-500P-CB-T3020 --- Pulleys - 192 Teeth x 50 mm x 3020
Material: Cast Iron    Type: 2    Pitch Dia. (D): 488.71 mm    Overall Length: 60.5 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Part Number: P-080G-192-500P-CB-T3020 Pulleys - 192 Teeth x 50 mm x 3020
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$2,933.68 AUD
$2,933.68 AUD
Each