Pins - Dowel - Extractable - With Vent

161 Products in this selection
  • Hardened and Ground Steel 100 Cr6 with a ground flat along one edge. DIN7979D.
  • Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes
  • An air release flat is ground along the full length of the pin
  • Hardness 55-62 HRC, HV550-650
  • Also known as parallel pins
Additional resources:
Dowel Pins Catalogue PDF
Master Pins Catalogue PDF
Diameter (D) Length (L) Approx. Overall Length Type Indicative
Image
4.000
mm
+ 0.004 / + 0.012 		10.00
mm
+/- 0.350 		10.00
mm
+/ - 0.350 		1 (Chamfer One End)
Goujon 4 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1) Goujon 4 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1) / Pins
1 Available Immediately | Further orders can be expected around Wed, Apr 02, 2025
$8.05 AUD
$8.05 AUD
Each
Diameter (D) Length (L) Approx. Overall Length Indicative
Image
4.000
mm
+ 0.004 / + 0.012 		10.00
mm
+/- 0.350 		10.00
mm
+/ - 0.350 		Goujon 4 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1) Goujon 4 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1) / Pins
1 Available Immediately | Further orders can be expected around Wed, Apr 02, 2025
$8.05 AUD
$8.05 AUD
Each
View the product page first if you are unsure.
4.000
mm
+ 0.004 / + 0.012 		12.00
mm
+/- 0.350 		12.00
mm
+/ - 0.350 		1 (Chamfer One End)
Goujon 4 x 12 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 12 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 12 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$11.41 AUD
$11.41 AUD
Per 2
4.000
mm
+ 0.004 / + 0.012 		12.00
mm
+/- 0.350 		12.00
mm
+/ - 0.350 		Goujon 4 x 12 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 12 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 12 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$11.41 AUD
$11.41 AUD
Per 2
View the product page first if you are unsure.
4.000
mm
+ 0.004 / + 0.012 		14.00
mm
+/- 0.350 		14.00
mm
+/ - 0.350 		1 (Chamfer One End)
Goujon 4 x 14 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 14 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 14 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$11.59 AUD
$11.59 AUD
Per 2
4.000
mm
+ 0.004 / + 0.012 		14.00
mm
+/- 0.350 		14.00
mm
+/ - 0.350 		Goujon 4 x 14 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 14 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 14 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$11.59 AUD
$11.59 AUD
Per 2
View the product page first if you are unsure.
4.000
mm
+ 0.004 / + 0.012 		16.00
mm
+/- 0.350 		16.00
mm
+/ - 0.350 		1 (Chamfer One End)
Goujon 4 x 16 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 16 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 16 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$12.32 AUD
$12.32 AUD
Per 2
4.000
mm
+ 0.004 / + 0.012 		16.00
mm
+/- 0.350 		16.00
mm
+/ - 0.350 		Goujon 4 x 16 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 16 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 16 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$12.32 AUD
$12.32 AUD
Per 2
View the product page first if you are unsure.
4.000
mm
+ 0.004 / + 0.012 		20.00
mm
+/- 0.420 		20.00
mm
+/ - 0.420 		1 (Chamfer One End)
Goujon 4 x 20 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 20 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 20 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$11.86 AUD
$11.86 AUD
Per 2
4.000
mm
+ 0.004 / + 0.012 		20.00
mm
+/- 0.420 		20.00
mm
+/ - 0.420 		Goujon 4 x 20 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 20 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 20 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$11.86 AUD
$11.86 AUD
Per 2
View the product page first if you are unsure.
4.000
mm
+ 0.004 / + 0.012 		24.00
mm
+/- 0.420 		24.00
mm
+/ - 0.420 		1 (Chamfer One End)
Goujon 4 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$11.95 AUD
$11.95 AUD
Per 2
4.000
mm
+ 0.004 / + 0.012 		24.00
mm
+/- 0.420 		24.00
mm
+/ - 0.420 		Goujon 4 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$11.95 AUD
$11.95 AUD
Per 2
View the product page first if you are unsure.
4.000
mm
+ 0.004 / + 0.012 		25.00
mm
+/- 0.420 		25.00
mm
+/ - 0.420 		1 (Chamfer One End)
Goujon 4 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 6)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 6) Goujon 4 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 6) / Pins
Contact Us | Item Discontinued - Please contact us if you need a large quantity
4.000
mm
+ 0.004 / + 0.012 		25.00
mm
+/- 0.420 		25.00
mm
+/ - 0.420 		Goujon 4 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 6)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 6) Goujon 4 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 6) / Pins
Contact Us | Item Discontinued - Please contact us if you need a large quantity
4.000
mm
+ 0.004 / + 0.012 		30.00
mm
+/- 0.500 		30.00
mm
+/ - 0.500 		1 (Chamfer One End)
Goujon 4 x 30 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 30 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 30 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$12.68 AUD
$12.68 AUD
Per 2
4.000
mm
+ 0.004 / + 0.012 		30.00
mm
+/- 0.500 		30.00
mm
+/ - 0.500 		Goujon 4 x 30 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 4 x 30 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) Goujon 4 x 30 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 2) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$12.68 AUD
$12.68 AUD
Per 2
View the product page first if you are unsure.
4.000
mm
+ 0.004 / + 0.012 		36.00
mm
+/- 0.500 		36.00
mm
+/ - 0.500 		1 (Chamfer One End)
1055796 | DP040-036-CH-1EF --- Dowel Pins - 4 mm x 36 mm x 36 mm
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP040-036-CH-1EF Dowel Pins - 4 mm x 36 mm x 36 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
4.000
mm
+ 0.004 / + 0.012 		36.00
mm
+/- 0.500 		36.00
mm
+/ - 0.500 		1055796 | DP040-036-CH-1EF --- Dowel Pins - 4 mm x 36 mm x 36 mm
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP040-036-CH-1EF Dowel Pins - 4 mm x 36 mm x 36 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
4.000
mm
+ 0.004 / + 0.012 		40.00
mm
+/- 0.500 		40.00
mm
+/ - 0.500 		1 (Chamfer One End)
1055856 | DP040-040-CH-1EF --- Dowel Pins - 4 mm x 40 mm x 40 mm
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP040-040-CH-1EF Dowel Pins - 4 mm x 40 mm x 40 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
4.000
mm
+ 0.004 / + 0.012 		40.00
mm
+/- 0.500 		40.00
mm
+/ - 0.500 		1055856 | DP040-040-CH-1EF --- Dowel Pins - 4 mm x 40 mm x 40 mm
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP040-040-CH-1EF Dowel Pins - 4 mm x 40 mm x 40 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
5.000
mm
+ 0.004 / + 0.012 		10.00
mm
+/- 0.350 		10.00
mm
+/ - 0.350 		1 (Chamfer One End)
Goujon 5 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 3)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 3) Goujon 5 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 3) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$10.86 AUD
$10.86 AUD
Per 3
5.000
mm
+ 0.004 / + 0.012 		10.00
mm
+/- 0.350 		10.00
mm
+/ - 0.350 		Goujon 5 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 3)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 3) Goujon 5 x 10 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 3) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$10.86 AUD
$10.86 AUD
Per 3
View the product page first if you are unsure.
5.000
mm
+ 0.004 / + 0.012 		12.00
mm
+/- 0.350 		12.00
mm
+/ - 0.350 		1 (Chamfer One End)
Goujon 5 x 12 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 12 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1) Goujon 5 x 12 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1) / Pins
18 Available Immediately | Further orders can be expected around Sat, Apr 19, 2025
$9.05 AUD
$9.05 AUD
Each
5.000
mm
+ 0.004 / + 0.012 		12.00
mm
+/- 0.350 		12.00
mm
+/ - 0.350 		Goujon 5 x 12 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 12 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1) Goujon 5 x 12 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 1) / Pins
18 Available Immediately | Further orders can be expected around Sat, Apr 19, 2025
$9.05 AUD
$9.05 AUD
Each
View the product page first if you are unsure.
5.000
mm
+ 0.004 / + 0.012 		14.00
mm
+/- 0.350 		14.00
mm
+/ - 0.350 		1 (Chamfer One End)
1063555 | DP050-014-CH-1EF (100 Pcs) --- Dowel Pins - 5 mm x 14 mm x 14 mm
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP050-014-CH-1EF (100 Pcs) Dowel Pins - 5 mm x 14 mm x 14 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
5.000
mm
+ 0.004 / + 0.012 		14.00
mm
+/- 0.350 		14.00
mm
+/ - 0.350 		1063555 | DP050-014-CH-1EF (100 Pcs) --- Dowel Pins - 5 mm x 14 mm x 14 mm
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP050-014-CH-1EF (100 Pcs) Dowel Pins - 5 mm x 14 mm x 14 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
5.000
mm
+ 0.004 / + 0.012 		16.00
mm
+/- 0.350 		16.00
mm
+/ - 0.350 		1 (Chamfer One End)
Goujon 5 x 16 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 16 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10) Goujon 5 x 16 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$6.59 AUD
$6.59 AUD
Per 10
5.000
mm
+ 0.004 / + 0.012 		16.00
mm
+/- 0.350 		16.00
mm
+/ - 0.350 		Goujon 5 x 16 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 16 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10) Goujon 5 x 16 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$6.59 AUD
$6.59 AUD
Per 10
View the product page first if you are unsure.
5.000
mm
+ 0.004 / + 0.012 		18.00
mm
+/- 0.420 		18.00
mm
+/ - 0.420 		1 (Chamfer One End)
1063961 | DP050-018-CH-1EF --- Dowel Pins - 5 mm x 18 mm x 18 mm
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP050-018-CH-1EF Dowel Pins - 5 mm x 18 mm x 18 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
5.000
mm
+ 0.004 / + 0.012 		18.00
mm
+/- 0.420 		18.00
mm
+/ - 0.420 		1063961 | DP050-018-CH-1EF --- Dowel Pins - 5 mm x 18 mm x 18 mm
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP050-018-CH-1EF Dowel Pins - 5 mm x 18 mm x 18 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
5.000
mm
+ 0.004 / + 0.012 		20.00
mm
+/- 0.420 		20.00
mm
+/ - 0.420 		1 (Chamfer One End)
Goujon 5 x 20 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 20 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10) Goujon 5 x 20 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10) / Pins
3 units (30 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Per 10
5.000
mm
+ 0.004 / + 0.012 		20.00
mm
+/- 0.420 		20.00
mm
+/ - 0.420 		Goujon 5 x 20 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 20 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10) Goujon 5 x 20 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 10) / Pins
3 units (30 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Per 10
5.000
mm
+ 0.004 / + 0.012 		24.00
mm
+/- 0.420 		24.00
mm
+/ - 0.420 		1 (Chamfer One End)
Goujon 5 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 3)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 3) Goujon 5 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 3) / Pins
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 19, 2025
$268.50 AUD
$268.50 AUD
Per 50
5.000
mm
+ 0.004 / + 0.012 		24.00
mm
+/- 0.420 		24.00
mm
+/ - 0.420 		Goujon 5 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 3)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 3) Goujon 5 x 24 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 3) / Pins
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 19, 2025
$268.50 AUD
$268.50 AUD
Per 50
View the product page first if you are unsure.
5.000
mm
+ 0.004 / + 0.012 		25.00
mm
+/- 0.420 		25.00
mm
+/ - 0.420 		1 (Chamfer One End)
Goujon 5 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5) Goujon 5 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$7.50 AUD
$7.50 AUD
Per 5
5.000
mm
+ 0.004 / + 0.012 		25.00
mm
+/- 0.420 		25.00
mm
+/ - 0.420 		Goujon 5 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5) Goujon 5 x 25 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$7.50 AUD
$7.50 AUD
Per 5
View the product page first if you are unsure.
5.000
mm
+ 0.004 / + 0.012 		30.00
mm
+/- 0.500 		30.00
mm
+/ - 0.500 		1 (Chamfer One End)
Goujon 5 x 30 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 4)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 30 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 4) Goujon 5 x 30 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 4) / Pins
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 28, 2025
$11.05 AUD
$11.05 AUD
Per 4
5.000
mm
+ 0.004 / + 0.012 		30.00
mm
+/- 0.500 		30.00
mm
+/ - 0.500 		Goujon 5 x 30 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 4)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 30 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 4) Goujon 5 x 30 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Lot de 4) / Pins
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 28, 2025
$11.05 AUD
$11.05 AUD
Per 4
View the product page first if you are unsure.
5.000
mm
+ 0.004 / + 0.012 		32.00
mm
+/- 0.500 		32.00
mm
+/ - 0.500 		1 (Chamfer One End)
Goujon 5 x 32 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 4)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 32 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 4) Goujon 5 x 32 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 4) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$10.77 AUD
$10.77 AUD
Per 4
5.000
mm
+ 0.004 / + 0.012 		32.00
mm
+/- 0.500 		32.00
mm
+/ - 0.500 		Goujon 5 x 32 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 4)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 32 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 4) Goujon 5 x 32 mm - Extractible avec évent Acier Carbone - DIN7979D - NoCor (Lot de 4) / Pins
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$10.77 AUD
$10.77 AUD
Per 4
View the product page first if you are unsure.
5.000
mm
+ 0.004 / + 0.012 		36.00
mm
+/- 0.500 		36.00
mm
+/ - 0.500 		1 (Chamfer One End)
1064772 | DP050-036-CH-1EF --- Dowel Pins - 5 mm x 36 mm x 36 mm
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP050-036-CH-1EF Dowel Pins - 5 mm x 36 mm x 36 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
5.000
mm
+ 0.004 / + 0.012 		36.00
mm
+/- 0.500 		36.00
mm
+/ - 0.500 		1064772 | DP050-036-CH-1EF --- Dowel Pins - 5 mm x 36 mm x 36 mm
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP050-036-CH-1EF Dowel Pins - 5 mm x 36 mm x 36 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
5.000
mm
+ 0.004 / + 0.012 		40.00
mm
+/- 0.500 		40.00
mm
+/ - 0.500 		1 (Chamfer One End)
Goujon 5 x 40 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5)
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 40 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5) Goujon 5 x 40 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5) / Pins
1 pack (5 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 5
5.000
mm
+ 0.004 / + 0.012 		40.00
mm
+/- 0.500 		40.00
mm
+/ - 0.500 		Goujon 5 x 40 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5)
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: Goujon 5 x 40 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5) Goujon 5 x 40 mm - Extractible avec évent en acier au carbone - DIN7979D - NoCor (Pack de 5) / Pins
1 pack (5 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 5
5.000
mm
+ 0.004 / + 0.012 		45.00
mm
+/- 0.500 		45.00
mm
+/ - 0.500 		1 (Chamfer One End)
1065026 | DP050-045-CH-1EF --- Dowel Pins - 5 mm x 45 mm x 45 mm
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP050-045-CH-1EF Dowel Pins - 5 mm x 45 mm x 45 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
5.000
mm
+ 0.004 / + 0.012 		45.00
mm
+/- 0.500 		45.00
mm
+/ - 0.500 		1065026 | DP050-045-CH-1EF --- Dowel Pins - 5 mm x 45 mm x 45 mm
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP050-045-CH-1EF Dowel Pins - 5 mm x 45 mm x 45 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
5.000
mm
+ 0.004 / + 0.012 		50.00
mm
+/- 0.600 		50.00
mm
+/ - 0.600 		1 (Chamfer One End)
1065140 | DP050-050-CH-1EF (100 Pcs) --- Dowel Pins - 5 mm x 50 mm x 50 mm
Material: Carbon Steel    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP050-050-CH-1EF (100 Pcs) Dowel Pins - 5 mm x 50 mm x 50 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
5.000
mm
+ 0.004 / + 0.012 		50.00
mm
+/- 0.600 		50.00
mm
+/ - 0.600 		1065140 | DP050-050-CH-1EF (100 Pcs) --- Dowel Pins - 5 mm x 50 mm x 50 mm
Material: Carbon Steel    Type: 1 (Chamfer One End)    Hardness: Heat Treated and Ground Rc 58-62    Thread Size: M3 (3x0.5mm)   
Part Number: DP050-050-CH-1EF (100 Pcs) Dowel Pins - 5 mm x 50 mm x 50 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity