Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

2 Products in this selection
  • Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
  • Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required.
  • Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles.
  • Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability.
  • Each table consists of a one piece base, a one piece table and a pair of linear bearings.
Travel Load Capacity Length (L) Height (A) / Width (B) Rail Height (C) Number of Holes(Rail/Carraige) Indicative
Image
18.009
 31.751
Kg 		35.001
mm 		8.001 / 20.015
mm 		4.013
mm 		2 / 4
 1119558 | DT-432RS --- Linear - 18.009 x 31.751 Kg x 35.001 mm
Material: Stainless    Rail Bolt Spacing (U/W): 25.0 / - mm    R: 5.004 mm    Thread Size (Base): Counterbored 2-56UNC    Thread Size (Carriage): 2-56UNCx3.50 mm    Carriage Spacing (M / P): 14.0 mm    Bolt From Carriage End (N): 3.5 mm   
Part Number: DT-432RS Linear - 18.009 x 31.751 Kg x 35.001 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$1,084.23 AUD
$1,084.23 AUD
Each
Travel Load Capacity Length (L) Height (A) / Width (B) Indicative
Image
18.009
 31.751
Kg 		35.001
mm 		8.001 / 20.015
mm 		1119558 | DT-432RS --- Linear - 18.009 x 31.751 Kg x 35.001 mm
Material: Stainless    Rail Height (C): 4.013 mm    Number of Holes(Rail/Carraige): 2 / 4    Rail Bolt Spacing (U/W): 25.0 / - mm    R: 5.004 mm    Thread Size (Base): Counterbored 2-56UNC    Thread Size (Carriage): 2-56UNCx3.50 mm    Carriage Spacing (M / P): 14.0 mm    Bolt From Carriage End (N): 3.5 mm   
Part Number: DT-432RS Linear - 18.009 x 31.751 Kg x 35.001 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$1,084.23 AUD
$1,084.23 AUD
Each
29.997
 125.645
Kg 		54.991
mm 		16.002 / 40.005
mm 		8.001
mm 		2 / 4
 1140540 | DT-445RS --- Linear - 29.997 x 125.645 Kg x 54.991 mm
Material: Stainless    Rail Bolt Spacing (U/W): 40.0 / - mm    R: 7.493 mm    Thread Size (Base): 8.31x5.18    Thread Size (Carriage): 10-32UNFx7.49 mm    Carriage Spacing (M / P): 30.0 mm    Bolt From Carriage End (N): 7.5 mm   
Part Number: DT-445RS Linear - 29.997 x 125.645 Kg x 54.991 mm / Linear Slides
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$898.23 AUD
$898.23 AUD
Each
29.997
 125.645
Kg 		54.991
mm 		16.002 / 40.005
mm 		1140540 | DT-445RS --- Linear - 29.997 x 125.645 Kg x 54.991 mm
Material: Stainless    Rail Height (C): 8.001 mm    Number of Holes(Rail/Carraige): 2 / 4    Rail Bolt Spacing (U/W): 40.0 / - mm    R: 7.493 mm    Thread Size (Base): 8.31x5.18    Thread Size (Carriage): 10-32UNFx7.49 mm    Carriage Spacing (M / P): 30.0 mm    Bolt From Carriage End (N): 7.5 mm   
Part Number: DT-445RS Linear - 29.997 x 125.645 Kg x 54.991 mm / Linear Slides
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$898.23 AUD
$898.23 AUD
Each