Leadscrew Nuts - Metric - Square - Metallic

1 Item Available
  • Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
  • Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content.
  • To be used with screws:- LFM, LSM, LRH, LSRH (Single Start).
  • Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights.
  • For power transmission and continuous use, always use bronze nuts, never steel.
  • Nuts and screws should always be lubricated with grease or oil.
Suits Screw Diameter (d) Lead / Pitch (P) Direction Width (D) Length (C) Contact Surface Indicative
Image
20.000
mm 		4
mm 		Left Hand
 35
mm (h11) 		30
mm
+/-0.15 		590
mm 2 		1123181 | VKM204LH --- Leadscrew - 20 mm x 4 mm Left Hand
Part Number: VKM204LH Leadscrew - 20 mm x 4 mm Left Hand / Leadscrew Nuts
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$20.00 AUD
$20.00 AUD
Each
Suits Screw Diameter (d) Lead / Pitch (P) Direction Width (D) Indicative
Image
20.000
mm 		4
mm 		Left Hand
 35
mm (h11) 		1123181 | VKM204LH --- Leadscrew - 20 mm x 4 mm Left Hand
Length (C): 30 mm +/-0.15    Contact Surface: 590 mm 2   
Part Number: VKM204LH Leadscrew - 20 mm x 4 mm Left Hand / Leadscrew Nuts
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$20.00 AUD
$20.00 AUD
Each