Inserts - Self Tapping - For Plastics

8 Products in this selection
This is a combined category of For Plastics Self Tapping Inserts.
Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Internal Thread Rec. Hole Diameter Length (L) Outside Diameter (B) Indicative
Image
8-32 UNC (4.17mm)
5.79
mm 		8.0
mm 		6.50
mm 		1056570 | IN-TP-042C-08-P-S3 --- Self Tapping Inserts - 8-32 UNC (4.17mm) x 5.79 mm x 8 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Required Hole Depth: 10.00 mm   
Category: Inserts - Self Tapping - For Plastics - Stainless Steel
Part Number: IN-TP-042C-08-P-S3 Self Tapping Inserts - 8-32 UNC (4.17mm) x 5.79 mm x 8 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$7.77 AUD
$7.77 AUD
Each
Internal Thread Rec. Hole Diameter Length (L) Outside Diameter (B) Indicative
Image
8-32 UNC (4.17mm)
5.79
mm 		8.0
mm 		6.50
mm 		1056570 | IN-TP-042C-08-P-S3 --- Self Tapping Inserts - 8-32 UNC (4.17mm) x 5.79 mm x 8 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Required Hole Depth: 10.00 mm   
Category: Inserts - Self Tapping - For Plastics - Stainless Steel
Part Number: IN-TP-042C-08-P-S3 Self Tapping Inserts - 8-32 UNC (4.17mm) x 5.79 mm x 8 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$7.77 AUD
$7.77 AUD
Each
View the product page first if you are unsure.
10-24 UNC (4.76mm)
7.09
mm 		10.0
mm 		8.00
mm 		1058934 | IN-TP-048C-10-P-S3 (50 Pcs) --- Self Tapping Inserts - 10-24 UNC (4.76mm) x 7.09 mm x 10 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Required Hole Depth: 13.00 mm   
Category: Inserts - Self Tapping - For Plastics - Stainless Steel
Part Number: IN-TP-048C-10-P-S3 (50 Pcs) Self Tapping Inserts - 10-24 UNC (4.76mm) x 7.09 mm x 10 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$733.68 AUD
$733.68 AUD
Per 50
10-24 UNC (4.76mm)
7.09
mm 		10.0
mm 		8.00
mm 		1058934 | IN-TP-048C-10-P-S3 (50 Pcs) --- Self Tapping Inserts - 10-24 UNC (4.76mm) x 7.09 mm x 10 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Required Hole Depth: 13.00 mm   
Category: Inserts - Self Tapping - For Plastics - Stainless Steel
Part Number: IN-TP-048C-10-P-S3 (50 Pcs) Self Tapping Inserts - 10-24 UNC (4.76mm) x 7.09 mm x 10 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$733.68 AUD
$733.68 AUD
Per 50
View the product page first if you are unsure.
10-24 UNC (4.76mm)
7.09
mm 		10.0
mm 		8.001
mm 		1058935 | IN-TP-0476C-100-P --- Self Tapping Inserts - 10-24 UNC (4.76mm) x 7.09 mm x 10 mm
Material: Steel    Required Hole Depth: 13.005 mm   
Category: Inserts - Self Tapping - For Plastics - Steel
Part Number: IN-TP-0476C-100-P Self Tapping Inserts - 10-24 UNC (4.76mm) x 7.09 mm x 10 mm
10 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$4.05 AUD
$4.05 AUD
Each
10-24 UNC (4.76mm)
7.09
mm 		10.0
mm 		8.001
mm 		1058935 | IN-TP-0476C-100-P --- Self Tapping Inserts - 10-24 UNC (4.76mm) x 7.09 mm x 10 mm
Material: Steel    Required Hole Depth: 13.005 mm   
Category: Inserts - Self Tapping - For Plastics - Steel
Part Number: IN-TP-0476C-100-P Self Tapping Inserts - 10-24 UNC (4.76mm) x 7.09 mm x 10 mm
10 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$4.05 AUD
$4.05 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
8.59
mm 		14.0
mm 		10.00
mm 		1072471 | IN-TP-064C-14-P-S3 --- Self Tapping Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Required Hole Depth: 17.00 mm   
Category: Inserts - Self Tapping - For Plastics - Stainless Steel
Part Number: IN-TP-064C-14-P-S3 Self Tapping Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14 mm
10 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$13.41 AUD
$13.41 AUD
Each
1/4-20 UNC (6.35mm)
8.59
mm 		14.0
mm 		10.00
mm 		1072471 | IN-TP-064C-14-P-S3 --- Self Tapping Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Required Hole Depth: 17.00 mm   
Category: Inserts - Self Tapping - For Plastics - Stainless Steel
Part Number: IN-TP-064C-14-P-S3 Self Tapping Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14 mm
10 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$13.41 AUD
$13.41 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
8.59
mm 		14.0
mm 		10.008
mm 		1072472 | IN-TP-0635C-140-P --- Self Tapping Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14 mm
Material: Steel    Required Hole Depth: 16.993 mm   
Category: Inserts - Self Tapping - For Plastics - Steel
Part Number: IN-TP-0635C-140-P Self Tapping Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$5.14 AUD
$5.14 AUD
Each
1/4-20 UNC (6.35mm)
8.59
mm 		14.0
mm 		10.008
mm 		1072472 | IN-TP-0635C-140-P --- Self Tapping Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14 mm
Material: Steel    Required Hole Depth: 16.993 mm   
Category: Inserts - Self Tapping - For Plastics - Steel
Part Number: IN-TP-0635C-140-P Self Tapping Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$5.14 AUD
$5.14 AUD
Each
View the product page first if you are unsure.
5/16-18 UNC (7.94mm)
10.59
mm 		15.0
mm 		12.014
mm 		1078167 | IN-TP-0794C-150-P --- Self Tapping Inserts - 5/16-18 UNC (7.94mm) x 10.59 mm x 15 mm
Material: Steel    Required Hole Depth: 18.009 mm   
Category: Inserts - Self Tapping - For Plastics - Steel
Part Number: IN-TP-0794C-150-P Self Tapping Inserts - 5/16-18 UNC (7.94mm) x 10.59 mm x 15 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$4.86 AUD
$4.86 AUD
Each
5/16-18 UNC (7.94mm)
10.59
mm 		15.0
mm 		12.014
mm 		1078167 | IN-TP-0794C-150-P --- Self Tapping Inserts - 5/16-18 UNC (7.94mm) x 10.59 mm x 15 mm
Material: Steel    Required Hole Depth: 18.009 mm   
Category: Inserts - Self Tapping - For Plastics - Steel
Part Number: IN-TP-0794C-150-P Self Tapping Inserts - 5/16-18 UNC (7.94mm) x 10.59 mm x 15 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$4.86 AUD
$4.86 AUD
Each
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
12.60
mm 		18.0
mm 		14.00
mm 		1087131 | IN-TP-095C-18-P-S3 (60 Pcs) --- Self Tapping Inserts - 3/8-16 UNC (9.53mm) x 12.6 mm x 18 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Required Hole Depth: 22.00 mm   
Category: Inserts - Self Tapping - For Plastics - Stainless Steel
Part Number: IN-TP-095C-18-P-S3 (60 Pcs) Self Tapping Inserts - 3/8-16 UNC (9.53mm) x 12.6 mm x 18 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$1,835.77 AUD
$1,835.77 AUD
Per 60
3/8-16 UNC (9.53mm)
12.60
mm 		18.0
mm 		14.00
mm 		1087131 | IN-TP-095C-18-P-S3 (60 Pcs) --- Self Tapping Inserts - 3/8-16 UNC (9.53mm) x 12.6 mm x 18 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Required Hole Depth: 22.00 mm   
Category: Inserts - Self Tapping - For Plastics - Stainless Steel
Part Number: IN-TP-095C-18-P-S3 (60 Pcs) Self Tapping Inserts - 3/8-16 UNC (9.53mm) x 12.6 mm x 18 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$1,835.77 AUD
$1,835.77 AUD
Per 60
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
12.60
mm 		18.0
mm 		14.021
mm 		1087132 | IN-TP-0953C-180-P --- Self Tapping Inserts - 3/8-16 UNC (9.53mm) x 12.6 mm x 18 mm
Material: Steel    Required Hole Depth: 21.996 mm   
Category: Inserts - Self Tapping - For Plastics - Steel
Part Number: IN-TP-0953C-180-P Self Tapping Inserts - 3/8-16 UNC (9.53mm) x 12.6 mm x 18 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$6.05 AUD
$6.05 AUD
Each
3/8-16 UNC (9.53mm)
12.60
mm 		18.0
mm 		14.021
mm 		1087132 | IN-TP-0953C-180-P --- Self Tapping Inserts - 3/8-16 UNC (9.53mm) x 12.6 mm x 18 mm
Material: Steel    Required Hole Depth: 21.996 mm   
Category: Inserts - Self Tapping - For Plastics - Steel
Part Number: IN-TP-0953C-180-P Self Tapping Inserts - 3/8-16 UNC (9.53mm) x 12.6 mm x 18 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$6.05 AUD
$6.05 AUD
Each
View the product page first if you are unsure.