Gears - Spur - Module 1.5 - Plastic - Standard

1 Item Available
  • PCD = No. of Teeth x 1.500mm. 20o Pressure Angle. Acetal and Nylon
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
Additional resources:
Module 1.5 Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
32
Nr. 		48.00
mm 		10.000
mm 		51.000
mm 		12.000
mm 		Module 1.5
 1145743 | G048B-32-M15-120-100-A-P --- Gears - 32 Teeth x 48 mm x 10 mm
Material: Acetal - No Insert    Hub Diameter (D1): 24.00 mm    Hub Projection (HL): 11.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G048B-32-M15-120-100-A-P Gears - 32 Teeth x 48 mm x 10 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$8.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
32
Nr. 		48.00
mm 		10.000
mm 		51.000
mm 		1145743 | G048B-32-M15-120-100-A-P --- Gears - 32 Teeth x 48 mm x 10 mm
Material: Acetal - No Insert    Face Width (FW): 12.000 mm    Pitch: Module 1.5    Hub Diameter (D1): 24.00 mm    Hub Projection (HL): 11.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G048B-32-M15-120-100-A-P Gears - 32 Teeth x 48 mm x 10 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$8.00 AUD
Each