Gears - Spur - 48DP - 20 Degree - Aluminium

1 Item Available
  • PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. 2024 and 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
  • 48 Diametrical Pitch. Approx 1.66mm between teeth.
Additional resources:
48DP Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
25
Nr. 		13.23
mm 		4.762
mm 		14.277
mm 		3.18
mm 		48DP
 1132821 | G013B-25-D48-032-048-AL-G --- Gears - 25 Teeth x 13.23 mm x 4.762 mm
Material: 2024 Aluminum Alloy    Hub Diameter (D1): 9.53 mm    Hub Projection (HL): 5.54 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G013B-25-D48-032-048-AL-G Gears - 25 Teeth x 13.23 mm x 4.762 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$10.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
25
Nr. 		13.23
mm 		4.762
mm 		14.277
mm 		1132821 | G013B-25-D48-032-048-AL-G --- Gears - 25 Teeth x 13.23 mm x 4.762 mm
Material: 2024 Aluminum Alloy    Face Width (FW): 3.18 mm    Pitch: 48DP    Hub Diameter (D1): 9.53 mm    Hub Projection (HL): 5.54 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G013B-25-D48-032-048-AL-G Gears - 25 Teeth x 13.23 mm x 4.762 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$10.00 AUD
Each