Belts - Metric Timing - 2.000mm Pitch - GT - 6mm Wide - Clean

2 Products in this selection
  • PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.
  • The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing.
  • The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking.
  • The belt also has a high flex life and resistance to elongation. GT3 will replace GT2 as stock is depleted.
  • Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm.
  • Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Additional resources:
Timing Belts Catalogue PDF
Idler Pulleys
2mm GT Timing Pulleys
Teeth Length Width Reinforcement Appearance Indicative
Image
100
 200
mm 		6.0
mm 		Fibreglass (GT2) or Carbon Fibre (GT3)
 Cream
 Courroie de distribution 100 dents incurvées propres 6 mm de large - Néoprène métrique recouvert de nylon avec cordons en fibre de verre - Blanc - Pas courbe GT 2 mm - MBA (lot de 1)
Material: Nylon Covered Neoprene Rubber with Fibreglass (GT2) or Carbon Fibre (GT3) Cords    Breaking Strength: 516 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C   
Part Number: Courroie de distribution 100 dents incurvées propres 6 mm de large - Néoprène métrique recouvert de nylon avec cordons en fibre de verre - Blanc - Pas courbe GT 2 mm - MBA (lot de 1) Courroie de distribution 100 dents incurvées propres 6 mm de large - Néoprène métrique recouvert de nylon avec cordons en fibre de verre - Blanc - Pas courbe GT 2 mm - MBA (lot de 1) / Belts
219 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
Teeth Length Width Indicative
Image
100
 200
mm 		6.0
mm 		Courroie de distribution 100 dents incurvées propres 6 mm de large - Néoprène métrique recouvert de nylon avec cordons en fibre de verre - Blanc - Pas courbe GT 2 mm - MBA (lot de 1)
Material: Nylon Covered Neoprene Rubber with Fibreglass (GT2) or Carbon Fibre (GT3) Cords    Reinforcement: Fibreglass (GT2) or Carbon Fibre (GT3)    Appearance: Cream    Breaking Strength: 516 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C   
Part Number: Courroie de distribution 100 dents incurvées propres 6 mm de large - Néoprène métrique recouvert de nylon avec cordons en fibre de verre - Blanc - Pas courbe GT 2 mm - MBA (lot de 1) Courroie de distribution 100 dents incurvées propres 6 mm de large - Néoprène métrique recouvert de nylon avec cordons en fibre de verre - Blanc - Pas courbe GT 2 mm - MBA (lot de 1) / Belts
219 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
126
 252
mm 		6.0
mm 		Fibreglass (GT2) or Carbon Fibre (GT3)
 Cream
 1195359 | B-020G-0126-0060-NFC --- Metric Timing Belts - 126 x 252 mm x 6 mm
Material: Nylon Covered Neoprene Rubber with Fibreglass (GT2) or Carbon Fibre (GT3) Cords    Breaking Strength: 516 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C   
Part Number: B-020G-0126-0060-NFC Metric Timing Belts - 126 x 252 mm x 6 mm
220 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
126
 252
mm 		6.0
mm 		1195359 | B-020G-0126-0060-NFC --- Metric Timing Belts - 126 x 252 mm x 6 mm
Material: Nylon Covered Neoprene Rubber with Fibreglass (GT2) or Carbon Fibre (GT3) Cords    Reinforcement: Fibreglass (GT2) or Carbon Fibre (GT3)    Appearance: Cream    Breaking Strength: 516 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C   
Part Number: B-020G-0126-0060-NFC Metric Timing Belts - 126 x 252 mm x 6 mm
220 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$8.25 AUD $5.00 AUD
Each