Collection: Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Single Sided

218 Products in this selection
  • Standard Series Timing Belts 5.080mm or 0.200 inch pitch.
  • Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
  • Tooth Length (T) - 1.40mm.
  • Tooth Height (H) - 1.30mm.
  • Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm.
  • Pitch (P) - 5.080mm (0.200 inch)
Additional resources:
Timing Belts Catalogue PDF
Timing Pulleys Catalogue
Teeth Length Width Reinforcement Appearance Indicative
Image
93
472.44
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 93 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 93 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 93 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $5.68 AUD
Prix habituel Prix promotionnel $5.68 AUD
Each
Teeth Length Width Indicative
Image
93
472.44
mm
9.5
mm
Courroie de distribution 93 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 93 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 93 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $5.68 AUD
Prix habituel Prix promotionnel $5.68 AUD
Each
View the product page first if you are unsure.
94
477.52
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 94 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 94 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 94 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
7 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.86 AUD
Prix habituel Prix promotionnel $6.86 AUD
Each
94
477.52
mm
9.5
mm
Courroie de distribution 94 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 94 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 94 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
7 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.86 AUD
Prix habituel Prix promotionnel $6.86 AUD
Each
View the product page first if you are unsure.
95
482.6
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 95 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 10)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 95 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 10) Courroie de distribution 95 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 10) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 19, 2025
Prix habituel $150.23 AUD
Prix habituel Prix promotionnel $150.23 AUD
Per 10
95
482.6
mm
9.5
mm
Courroie de distribution 95 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 10)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 95 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 10) Courroie de distribution 95 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 10) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 19, 2025
Prix habituel $150.23 AUD
Prix habituel Prix promotionnel $150.23 AUD
Per 10
View the product page first if you are unsure.
96
487.68
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 96 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 96 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 96 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
7 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.14 AUD
Prix habituel Prix promotionnel $6.14 AUD
Each
96
487.68
mm
9.5
mm
Courroie de distribution 96 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 96 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 96 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
7 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.14 AUD
Prix habituel Prix promotionnel $6.14 AUD
Each
View the product page first if you are unsure.
97
492.76
mm
9.5
mm
Fibreglass
Black
1186646 | B-XL-0097-0095-NFB --- Inch Timing Belts - 97 x 492.76 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0097-0095-NFB Inch Timing Belts - 97 x 492.76 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.41 AUD
Prix habituel Prix promotionnel $6.41 AUD
Each
97
492.76
mm
9.5
mm
1186646 | B-XL-0097-0095-NFB --- Inch Timing Belts - 97 x 492.76 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0097-0095-NFB Inch Timing Belts - 97 x 492.76 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.41 AUD
Prix habituel Prix promotionnel $6.41 AUD
Each
View the product page first if you are unsure.
98
497.84
mm
9.5
mm
Fibreglass
Black
1186818 | B-XL-0098-0095-NFB --- Inch Timing Belts - 98 x 497.84 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0098-0095-NFB Inch Timing Belts - 98 x 497.84 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.41 AUD
Prix habituel Prix promotionnel $6.41 AUD
Each
98
497.84
mm
9.5
mm
1186818 | B-XL-0098-0095-NFB --- Inch Timing Belts - 98 x 497.84 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0098-0095-NFB Inch Timing Belts - 98 x 497.84 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.41 AUD
Prix habituel Prix promotionnel $6.41 AUD
Each
View the product page first if you are unsure.
99
502.92
mm
9.5
mm
Fibreglass
Black
1187005 | B-XL-0099-0095-NFB --- Inch Timing Belts - 99 x 502.92 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0099-0095-NFB Inch Timing Belts - 99 x 502.92 mm x 9.5 mm
5 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
99
502.92
mm
9.5
mm
1187005 | B-XL-0099-0095-NFB --- Inch Timing Belts - 99 x 502.92 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0099-0095-NFB Inch Timing Belts - 99 x 502.92 mm x 9.5 mm
5 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
View the product page first if you are unsure.
100
508
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 100 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 100 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 100 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.05 AUD
Prix habituel Prix promotionnel $7.05 AUD
Each
100
508
mm
9.5
mm
Courroie de distribution 100 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 100 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 100 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.05 AUD
Prix habituel Prix promotionnel $7.05 AUD
Each
View the product page first if you are unsure.
101
513.08
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 101 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 101 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 101 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.05 AUD
Prix habituel Prix promotionnel $7.05 AUD
Each
101
513.08
mm
9.5
mm
Courroie de distribution 101 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 101 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 101 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.05 AUD
Prix habituel Prix promotionnel $7.05 AUD
Each
View the product page first if you are unsure.
102
518.16
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 102 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 102 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 102 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.05 AUD
Prix habituel Prix promotionnel $7.05 AUD
Each
102
518.16
mm
9.5
mm
Courroie de distribution 102 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 102 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 102 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.05 AUD
Prix habituel Prix promotionnel $7.05 AUD
Each
View the product page first if you are unsure.
103
523.24
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 103 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 103 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 103 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.59 AUD
Prix habituel Prix promotionnel $7.59 AUD
Each
103
523.24
mm
9.5
mm
Courroie de distribution 103 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 103 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 103 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.59 AUD
Prix habituel Prix promotionnel $7.59 AUD
Each
View the product page first if you are unsure.
104
528.32
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 104 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 104 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 104 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.59 AUD
Prix habituel Prix promotionnel $7.59 AUD
Each
104
528.32
mm
9.5
mm
Courroie de distribution 104 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 104 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 104 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.59 AUD
Prix habituel Prix promotionnel $7.59 AUD
Each
View the product page first if you are unsure.
105
533.4
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 105 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 105 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 105 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.59 AUD
Prix habituel Prix promotionnel $7.59 AUD
Each
105
533.4
mm
9.5
mm
Courroie de distribution 105 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 105 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 105 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.59 AUD
Prix habituel Prix promotionnel $7.59 AUD
Each
View the product page first if you are unsure.
106
538.48
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 106 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 106 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 106 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
106
538.48
mm
9.5
mm
Courroie de distribution 106 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 106 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 106 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
View the product page first if you are unsure.
107
543.56
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 107 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 107 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 107 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
107
543.56
mm
9.5
mm
Courroie de distribution 107 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 107 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 107 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
View the product page first if you are unsure.
108
548.64
mm
9.5
mm
Fibreglass
Black
Courroie de distribution 108 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 108 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 108 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
2 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.68 AUD
Prix habituel Prix promotionnel $6.68 AUD
Each
108
548.64
mm
9.5
mm
Courroie de distribution 108 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: Courroie de distribution 108 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 108 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
2 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.68 AUD
Prix habituel Prix promotionnel $6.68 AUD
Each
View the product page first if you are unsure.
109
553.72
mm
9.5
mm
Fibreglass
Black
1190655 | B-XL-0109-0095-NFB --- Inch Timing Belts - 109 x 553.72 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0109-0095-NFB Inch Timing Belts - 109 x 553.72 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
109
553.72
mm
9.5
mm
1190655 | B-XL-0109-0095-NFB --- Inch Timing Belts - 109 x 553.72 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0109-0095-NFB Inch Timing Belts - 109 x 553.72 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
View the product page first if you are unsure.
110
558.8
mm
9.5
mm
Fibreglass
Black
1191337 | B-XL-0110-0095-NFB --- Inch Timing Belts - 110 x 558.8 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0110-0095-NFB Inch Timing Belts - 110 x 558.8 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.59 AUD
Prix habituel Prix promotionnel $7.59 AUD
Each
110
558.8
mm
9.5
mm
1191337 | B-XL-0110-0095-NFB --- Inch Timing Belts - 110 x 558.8 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0110-0095-NFB Inch Timing Belts - 110 x 558.8 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $7.59 AUD
Prix habituel Prix promotionnel $7.59 AUD
Each
View the product page first if you are unsure.
111
563.88
mm
9.5
mm
Fibreglass
Black
1191536 | B-XL-0111-0095-NFB --- Inch Timing Belts - 111 x 563.88 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0111-0095-NFB Inch Timing Belts - 111 x 563.88 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
111
563.88
mm
9.5
mm
1191536 | B-XL-0111-0095-NFB --- Inch Timing Belts - 111 x 563.88 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0111-0095-NFB Inch Timing Belts - 111 x 563.88 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
View the product page first if you are unsure.
112
568.96
mm
9.5
mm
Fibreglass
Black
1191840 | B-XL-0112-0095-NFB --- Inch Timing Belts - 112 x 568.96 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0112-0095-NFB Inch Timing Belts - 112 x 568.96 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
112
568.96
mm
9.5
mm
1191840 | B-XL-0112-0095-NFB --- Inch Timing Belts - 112 x 568.96 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0112-0095-NFB Inch Timing Belts - 112 x 568.96 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
View the product page first if you are unsure.
113
574.04
mm
9.5
mm
Fibreglass
Black
1191971 | B-XL-0113-0095-NFB --- Inch Timing Belts - 113 x 574.04 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0113-0095-NFB Inch Timing Belts - 113 x 574.04 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $8.23 AUD
Prix habituel Prix promotionnel $8.23 AUD
Each
113
574.04
mm
9.5
mm
1191971 | B-XL-0113-0095-NFB --- Inch Timing Belts - 113 x 574.04 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0113-0095-NFB Inch Timing Belts - 113 x 574.04 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $8.23 AUD
Prix habituel Prix promotionnel $8.23 AUD
Each
View the product page first if you are unsure.
114
579.12
mm
9.5
mm
Fibreglass
Black
1192119 | B-XL-0114-0095-NFB --- Inch Timing Belts - 114 x 579.12 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0114-0095-NFB Inch Timing Belts - 114 x 579.12 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
114
579.12
mm
9.5
mm
1192119 | B-XL-0114-0095-NFB --- Inch Timing Belts - 114 x 579.12 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0114-0095-NFB Inch Timing Belts - 114 x 579.12 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $6.23 AUD
Prix habituel Prix promotionnel $6.23 AUD
Each
View the product page first if you are unsure.
115
584.2
mm
9.5
mm
Fibreglass
Black
1192602 | B-XL-0115-0095-NFB --- Inch Timing Belts - 115 x 584.2 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0115-0095-NFB Inch Timing Belts - 115 x 584.2 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $8.23 AUD
Prix habituel Prix promotionnel $8.23 AUD
Each
115
584.2
mm
9.5
mm
1192602 | B-XL-0115-0095-NFB --- Inch Timing Belts - 115 x 584.2 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0115-0095-NFB Inch Timing Belts - 115 x 584.2 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $8.23 AUD
Prix habituel Prix promotionnel $8.23 AUD
Each
View the product page first if you are unsure.
116
589.28
mm
9.5
mm
Fibreglass
Black
1192765 | B-XL-0116-0095-NFB --- Inch Timing Belts - 116 x 589.28 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0116-0095-NFB Inch Timing Belts - 116 x 589.28 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $5.86 AUD
Prix habituel Prix promotionnel $5.86 AUD
Each
116
589.28
mm
9.5
mm
1192765 | B-XL-0116-0095-NFB --- Inch Timing Belts - 116 x 589.28 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature (C): -34 Deg C    Max Temperature (C): 85 Deg C    Tooth Angle (A): 50 °   
Part Number: B-XL-0116-0095-NFB Inch Timing Belts - 116 x 589.28 mm x 9.5 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
Prix habituel $5.86 AUD
Prix habituel Prix promotionnel $5.86 AUD
Each
View the product page first if you are unsure.