Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Single Sided

218 Products in this selection
  • Standard Series Timing Belts 5.080mm or 0.200 inch pitch.
  • Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
  • Tooth Length (T) - 1.40mm.
  • Tooth Height (H) - 1.30mm.
  • Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm.
  • Pitch (P) - 5.080mm (0.200 inch)
Additional resources:
Timing Belts Catalogue PDF
Timing Pulleys Catalogue
Teeth Length Width Reinforcement Appearance Indicative
Image
21
Nr. 		106.68
mm 		9.5
mm 		Fibreglass
 Black
 Courroie de distribution 21 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 21 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 21 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
5 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$11.50 AUD
$11.50 AUD
Each
Teeth Length Width Indicative
Image
21
Nr. 		106.68
mm 		9.5
mm 		Courroie de distribution 21 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 21 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 21 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
5 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$11.50 AUD
$11.50 AUD
Each
25
Nr. 		127
mm 		9.5
mm 		Fibreglass
 Black
 1134332 | B-XL-0025-0095-NFB --- Belts - 25 Teeth x 127 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0025-0095-NFB Belts - 25 Teeth x 127 mm x 9.5 mm
2 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$13.05 AUD
$13.05 AUD
Each
25
Nr. 		127
mm 		9.5
mm 		1134332 | B-XL-0025-0095-NFB --- Belts - 25 Teeth x 127 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0025-0095-NFB Belts - 25 Teeth x 127 mm x 9.5 mm
2 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$13.05 AUD
$13.05 AUD
Each
27
Nr. 		137.16
mm 		9.5
mm 		Fibreglass
 Black
 1138064 | B-XL-0027-0095-NFB --- Belts - 27 Teeth x 137.16 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0027-0095-NFB Belts - 27 Teeth x 137.16 mm x 9.5 mm
1 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$13.05 AUD
$13.05 AUD
Each
27
Nr. 		137.16
mm 		9.5
mm 		1138064 | B-XL-0027-0095-NFB --- Belts - 27 Teeth x 137.16 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0027-0095-NFB Belts - 27 Teeth x 137.16 mm x 9.5 mm
1 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$13.05 AUD
$13.05 AUD
Each
28
Nr. 		142.24
mm 		9.5
mm 		Fibreglass
 Black
 Courroie de distribution 28 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 28 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 28 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$12.14 AUD
$12.14 AUD
Each
28
Nr. 		142.24
mm 		9.5
mm 		Courroie de distribution 28 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 28 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 28 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$12.14 AUD
$12.14 AUD
Each
29
Nr. 		147.32
mm 		9.5
mm 		Fibreglass
 Black
 Courroie de distribution 29 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 29 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 29 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$12.14 AUD
$12.14 AUD
Each
29
Nr. 		147.32
mm 		9.5
mm 		Courroie de distribution 29 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 29 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 29 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$12.14 AUD
$12.14 AUD
Each
30
Nr. 		152.4
mm 		9.5
mm 		Fibreglass
 Black
 1142735 | B-XL-0030-0095-NFB --- Belts - 30 Teeth x 152.4 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0030-0095-NFB Belts - 30 Teeth x 152.4 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
30
Nr. 		152.4
mm 		9.5
mm 		1142735 | B-XL-0030-0095-NFB --- Belts - 30 Teeth x 152.4 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0030-0095-NFB Belts - 30 Teeth x 152.4 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
31
Nr. 		157.48
mm 		9.5
mm 		Fibreglass
 Black
 1143643 | B-XL-0031-0095-NFB --- Belts - 31 Teeth x 157.48 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0031-0095-NFB Belts - 31 Teeth x 157.48 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
31
Nr. 		157.48
mm 		9.5
mm 		1143643 | B-XL-0031-0095-NFB --- Belts - 31 Teeth x 157.48 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0031-0095-NFB Belts - 31 Teeth x 157.48 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
32
Nr. 		162.56
mm 		9.5
mm 		Fibreglass
 Black
 1145930 | B-XL-0032-0095-NFB --- Belts - 32 Teeth x 162.56 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0032-0095-NFB Belts - 32 Teeth x 162.56 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
32
Nr. 		162.56
mm 		9.5
mm 		1145930 | B-XL-0032-0095-NFB --- Belts - 32 Teeth x 162.56 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0032-0095-NFB Belts - 32 Teeth x 162.56 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
33
Nr. 		167.64
mm 		9.5
mm 		Fibreglass
 Black
 1146352 | B-XL-0033-0095-NFB --- Belts - 33 Teeth x 167.64 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0033-0095-NFB Belts - 33 Teeth x 167.64 mm x 9.5 mm
1 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$13.32 AUD
$13.32 AUD
Each
33
Nr. 		167.64
mm 		9.5
mm 		1146352 | B-XL-0033-0095-NFB --- Belts - 33 Teeth x 167.64 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0033-0095-NFB Belts - 33 Teeth x 167.64 mm x 9.5 mm
1 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$13.32 AUD
$13.32 AUD
Each
34
Nr. 		172.72
mm 		9.5
mm 		Fibreglass
 Black
 1146931 | B-XL-0034-0095-NFB --- Belts - 34 Teeth x 172.72 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0034-0095-NFB Belts - 34 Teeth x 172.72 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
34
Nr. 		172.72
mm 		9.5
mm 		1146931 | B-XL-0034-0095-NFB --- Belts - 34 Teeth x 172.72 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0034-0095-NFB Belts - 34 Teeth x 172.72 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
34
Nr. 		172.72
mm 		9.5
mm 		Kevlar
 Black
 1146933 | B-XL-0034-0095-PKB --- Belts - 34 Teeth x 172.72 mm x 9.5 mm
Material: Polyurethane with Kevlar Cords    Breaking Strength: 1734 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0034-0095-PKB Belts - 34 Teeth x 172.72 mm x 9.5 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$15.23 AUD
$25.12 AUD $15.23 AUD
Each
34
Nr. 		172.72
mm 		9.5
mm 		1146933 | B-XL-0034-0095-PKB --- Belts - 34 Teeth x 172.72 mm x 9.5 mm
Material: Polyurethane with Kevlar Cords    Reinforcement: Kevlar    Appearance: Black    Breaking Strength: 1734 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0034-0095-PKB Belts - 34 Teeth x 172.72 mm x 9.5 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$15.23 AUD
$25.12 AUD $15.23 AUD
Each
35
Nr. 		177.8
mm 		9.5
mm 		Fibreglass
 Black
 Courroie de distribution 35 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 35 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 35 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
35
Nr. 		177.8
mm 		9.5
mm 		Courroie de distribution 35 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 35 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 35 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
35
Nr. 		177.8
mm 		9.5
mm 		Polyester
 Black
 Courroie de distribution 35 dents 9,5 mm de large – Polyuréthane impérial avec cordons en polyester – Noir – Pas trapézoïdal XL 5,08 mm (1/5") - MBA (lot de 1)
Material: Polyurethane with Polyester Cords    Breaking Strength: 1067 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 35 dents 9,5 mm de large – Polyuréthane impérial avec cordons en polyester – Noir – Pas trapézoïdal XL 5,08 mm (1/5") - MBA (lot de 1) Courroie de distribution 35 dents 9,5 mm de large – Polyuréthane impérial avec cordons en polyester – Noir – Pas trapézoïdal XL 5,08 mm (1/5") - MBA (lot de 1) / Belts
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$11.77 AUD
$19.42 AUD $11.77 AUD
Each
35
Nr. 		177.8
mm 		9.5
mm 		Courroie de distribution 35 dents 9,5 mm de large – Polyuréthane impérial avec cordons en polyester – Noir – Pas trapézoïdal XL 5,08 mm (1/5") - MBA (lot de 1)
Material: Polyurethane with Polyester Cords    Reinforcement: Polyester    Appearance: Black    Breaking Strength: 1067 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 35 dents 9,5 mm de large – Polyuréthane impérial avec cordons en polyester – Noir – Pas trapézoïdal XL 5,08 mm (1/5") - MBA (lot de 1) Courroie de distribution 35 dents 9,5 mm de large – Polyuréthane impérial avec cordons en polyester – Noir – Pas trapézoïdal XL 5,08 mm (1/5") - MBA (lot de 1) / Belts
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$11.77 AUD
$19.42 AUD $11.77 AUD
Each
36
Nr. 		182.88
mm 		9.5
mm 		Fibreglass
 Black
 1149881 | B-XL-0036-0095-NFB --- Belts - 36 Teeth x 182.88 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0036-0095-NFB Belts - 36 Teeth x 182.88 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.86 AUD
$5.86 AUD
Each
36
Nr. 		182.88
mm 		9.5
mm 		1149881 | B-XL-0036-0095-NFB --- Belts - 36 Teeth x 182.88 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0036-0095-NFB Belts - 36 Teeth x 182.88 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.86 AUD
$5.86 AUD
Each
37
Nr. 		187.96
mm 		9.5
mm 		Fibreglass
 Black
 Courroie de distribution 37 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 37 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 37 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
37
Nr. 		187.96
mm 		9.5
mm 		Courroie de distribution 37 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 37 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 37 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
38
Nr. 		193.04
mm 		9.5
mm 		Fibreglass
 Black
 Courroie de distribution 38 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 38 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 38 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
2 Available
| Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
38
Nr. 		193.04
mm 		9.5
mm 		Courroie de distribution 38 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 38 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 38 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
2 Available
| | Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
39
Nr. 		198.12
mm 		9.5
mm 		Fibreglass
 Black
 Courroie de distribution 39 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 39 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 39 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
4 Available
| Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
39
Nr. 		198.12
mm 		9.5
mm 		Courroie de distribution 39 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Courroie de distribution 39 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) Courroie de distribution 39 dents 9,5 mm de large – Néoprène recouvert de nylon impérial avec cordons en fibre de verre – Noir – Pas trapézoïdal XL de 5,08 mm (1/5 pouce) – MBA (lot de 1) / Belts
4 Available
| | Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
40
Nr. 		203.2
mm 		9.5
mm 		Fibreglass
 Black
 1154561 | B-XL-0040-0095-NFB --- Belts - 40 Teeth x 203.2 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0040-0095-NFB Belts - 40 Teeth x 203.2 mm x 9.5 mm
1 Available
| Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
40
Nr. 		203.2
mm 		9.5
mm 		1154561 | B-XL-0040-0095-NFB --- Belts - 40 Teeth x 203.2 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0040-0095-NFB Belts - 40 Teeth x 203.2 mm x 9.5 mm
1 Available
| | Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
41
Nr. 		208.28
mm 		9.5
mm 		Fibreglass
 Black
 1155075 | B-XL-0041-0095-NFB --- Belts - 41 Teeth x 208.28 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0041-0095-NFB Belts - 41 Teeth x 208.28 mm x 9.5 mm
4 Available
| Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
41
Nr. 		208.28
mm 		9.5
mm 		1155075 | B-XL-0041-0095-NFB --- Belts - 41 Teeth x 208.28 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0041-0095-NFB Belts - 41 Teeth x 208.28 mm x 9.5 mm
4 Available
| | Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
42
Nr. 		213.36
mm 		9.5
mm 		Fibreglass
 Black
 1155967 | B-XL-0042-0095-NFB --- Belts - 42 Teeth x 213.36 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0042-0095-NFB Belts - 42 Teeth x 213.36 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
42
Nr. 		213.36
mm 		9.5
mm 		1155967 | B-XL-0042-0095-NFB --- Belts - 42 Teeth x 213.36 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0042-0095-NFB Belts - 42 Teeth x 213.36 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
43
Nr. 		218.44
mm 		9.5
mm 		Fibreglass
 Black
 1156391 | B-XL-0043-0095-NFB --- Belts - 43 Teeth x 218.44 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0043-0095-NFB Belts - 43 Teeth x 218.44 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
43
Nr. 		218.44
mm 		9.5
mm 		1156391 | B-XL-0043-0095-NFB --- Belts - 43 Teeth x 218.44 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0043-0095-NFB Belts - 43 Teeth x 218.44 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
44
Nr. 		223.52
mm 		9.5
mm 		Fibreglass
 Black
 1156941 | B-XL-0044-0095-NFB --- Belts - 44 Teeth x 223.52 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0044-0095-NFB Belts - 44 Teeth x 223.52 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
44
Nr. 		223.52
mm 		9.5
mm 		1156941 | B-XL-0044-0095-NFB --- Belts - 44 Teeth x 223.52 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0044-0095-NFB Belts - 44 Teeth x 223.52 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
45
Nr. 		228.6
mm 		9.5
mm 		Fibreglass
 Black
 1158639 | B-XL-0045-0095-NFB --- Belts - 45 Teeth x 228.6 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0045-0095-NFB Belts - 45 Teeth x 228.6 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
45
Nr. 		228.6
mm 		9.5
mm 		1158639 | B-XL-0045-0095-NFB --- Belts - 45 Teeth x 228.6 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0045-0095-NFB Belts - 45 Teeth x 228.6 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.14 AUD
$6.14 AUD
Each
46
Nr. 		233.68
mm 		9.5
mm 		Fibreglass
 Black
 1159184 | B-XL-0046-0095-NFB --- Belts - 46 Teeth x 233.68 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0046-0095-NFB Belts - 46 Teeth x 233.68 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each
46
Nr. 		233.68
mm 		9.5
mm 		1159184 | B-XL-0046-0095-NFB --- Belts - 46 Teeth x 233.68 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0046-0095-NFB Belts - 46 Teeth x 233.68 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.68 AUD
$5.68 AUD
Each