Gears - Spur - Module 0.75 - Brass

1 Item Available
  • PCD = No. of Teeth x 0.750mm. 20o Pressure Angle. Brass.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
Additional resources:
Module 0.75 Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
24
Nr. 		18.00
mm 		6.000
mm 		19.500
mm 		3.000
mm 		Module 0.75
 1130976 | G018B-24-M075-030-060-B-G --- Gears - 24 Teeth x 18 mm x 6 mm
Material: Brass    Hub Diameter (D1): 14.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 8 - ( AGMA 9 )   
Part Number: G018B-24-M075-030-060-B-G Gears - 24 Teeth x 18 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$32.32 AUD
$32.32 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
24
Nr. 		18.00
mm 		6.000
mm 		19.500
mm 		1130976 | G018B-24-M075-030-060-B-G --- Gears - 24 Teeth x 18 mm x 6 mm
Material: Brass    Face Width (FW): 3.000 mm    Pitch: Module 0.75    Hub Diameter (D1): 14.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 8 - ( AGMA 9 )   
Part Number: G018B-24-M075-030-060-B-G Gears - 24 Teeth x 18 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$32.32 AUD
$32.32 AUD
Each