Gears - Spur - Module 0.5 - Plastic with Insert

2 Products in this selection
  • PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Acetal.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
Additional resources:
Module 0.5 Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
21
Nr. 		10.50
mm 		3.000
mm 		11.500
mm 		3.000
mm 		Module 0.5
 1127043 | G011B-21-M05-030-030-AB-G --- Gears - 21 Teeth x 10.5 mm x 3 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 8.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G011B-21-M05-030-030-AB-G Gears - 21 Teeth x 10.5 mm x 3 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$7.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
21
Nr. 		10.50
mm 		3.000
mm 		11.500
mm 		1127043 | G011B-21-M05-030-030-AB-G --- Gears - 21 Teeth x 10.5 mm x 3 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 8.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G011B-21-M05-030-030-AB-G Gears - 21 Teeth x 10.5 mm x 3 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$7.00 AUD
$7.00 AUD
Each
24
Nr. 		12.00
mm 		4.000
mm 		13.000
mm 		3.000
mm 		Module 0.5
 1130878 | G012B-24-M05-030-040-AB-G --- Gears - 24 Teeth x 12 mm x 4 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G012B-24-M05-030-040-AB-G Gears - 24 Teeth x 12 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$9.00 AUD
$9.00 AUD
Each
24
Nr. 		12.00
mm 		4.000
mm 		13.000
mm 		1130878 | G012B-24-M05-030-040-AB-G --- Gears - 24 Teeth x 12 mm x 4 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G012B-24-M05-030-040-AB-G Gears - 24 Teeth x 12 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$9.00 AUD
$9.00 AUD
Each