Gears - Spur - 64DP - Aluminium

1 Item Available
  • PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
  • 64 Diametrical Pitch. Approx 1.25mm between teeth.
Additional resources:
64DP Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
21
Nr. 		8.33
mm 		3.175
mm 		9.126
mm 		3.18
mm 		64DP
 1126976 | G008B-21-D64-032-032-AL-G --- Gears - 21 Teeth x 8.33 mm x 3.175 mm
Material: 2024 Aluminum Alloy    Hub Diameter (D1): 7.93 mm    Hub Projection (HL): 4.76 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G008B-21-D64-032-032-AL-G Gears - 21 Teeth x 8.33 mm x 3.175 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$9.00 AUD
$9.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
21
Nr. 		8.33
mm 		3.175
mm 		9.126
mm 		1126976 | G008B-21-D64-032-032-AL-G --- Gears - 21 Teeth x 8.33 mm x 3.175 mm
Material: 2024 Aluminum Alloy    Face Width (FW): 3.18 mm    Pitch: 64DP    Hub Diameter (D1): 7.93 mm    Hub Projection (HL): 4.76 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G008B-21-D64-032-032-AL-G Gears - 21 Teeth x 8.33 mm x 3.175 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$9.00 AUD
$9.00 AUD
Each