Couplings - Reli A Flex - Long Series - Clamp Type

1 Item Available
  • From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).
  • Aluminium Alloy 7075-T6
  • Zero backlash, one piece construction
  • Maximises torsional stiffness without inducing high bearing loads
  • Over 50,000,000 test cycles at rated load and 80 percent offset without failure
  • Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C
Bores (B1 / B2) Bores (B1 / B2) OD (D) / Clearance Dia (H) Length (L) Working Torque Maximum Speed Indicative
Image
5.000
mm
+0.020 / -0.000 		6.350
mm
+0.020 / -0.000 		16 / 18
mm
+/- 0.13 		23.5
mm
+/- 0.13 		0.85
N.m 		10000
RPM 		1062271 | CP-050-064-16-024-H-RFC-AL --- Couplings - 5 mm x 6.35 mm 16 / 18
Hub Length (E): 5.90 mm    Torsional Stiffness: 81.0 Nm/rad    Parallel Misalignment: 0.20 mm    Angular Misalignment: 2.5 Deg    Axial Misalignment: +/-0.40 mm    Max Inertia: 3.20 g/cm Sq   
Part Number: CP-050-064-16-024-H-RFC-AL Couplings - 5 mm x 6.35 mm 16 / 18
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$80.00 AUD
$80.00 AUD
Each
Bores (B1 / B2) Bores (B1 / B2) OD (D) / Clearance Dia (H) Length (L) Indicative
Image
5.000
mm
+0.020 / -0.000 		6.350
mm
+0.020 / -0.000 		16 / 18
mm
+/- 0.13 		23.5
mm
+/- 0.13 		1062271 | CP-050-064-16-024-H-RFC-AL --- Couplings - 5 mm x 6.35 mm 16 / 18
Working Torque: 0.85 N.m    Maximum Speed: 10000 RPM    Hub Length (E): 5.90 mm    Torsional Stiffness: 81.0 Nm/rad    Parallel Misalignment: 0.20 mm    Angular Misalignment: 2.5 Deg    Axial Misalignment: +/-0.40 mm    Max Inertia: 3.20 g/cm Sq   
Part Number: CP-050-064-16-024-H-RFC-AL Couplings - 5 mm x 6.35 mm 16 / 18
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$80.00 AUD
$80.00 AUD
Each