Bushes - Plastic Flanged - Iglidur J

2 Products in this selection
  • Low Wear - Dry Running - Vibration Dampening - Chemical Resistance.
  • Specific Gravity 1.49 g/cm3.
  • Operating Temp 120 C short term / 90 C long term.
  • Tensile Strength at 20 oC = 73 Mpa.
  • Hardness 74 Shore D (DIN53505).
  • Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Additional resources:
Bushes PDF Catalogue
Bronze Flanged Bushes
Plastic Unflanged Bushes
Nom. ID (d) Nom. OD (D) Length (s) Flange OD (D1) Flange Thickness (s1) Indicative
Image
12.000
mm
+0.032 / +0.102 		14.000
mm 		5.000
mm
+0.000 / -0.180 		20.00
mm 		1.00
mm 		1098465 | BF0120-0140-0050-PJ --- Bushes - 12 mm x 14 mm x 5 mm
Material: Iglidur J   
Part Number: BF0120-0140-0050-PJ Bushes - 12 mm x 14 mm x 5 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$2.00 AUD
Each
Nom. ID (d) Nom. OD (D) Length (s) Flange OD (D1) Indicative
Image
12.000
mm
+0.032 / +0.102 		14.000
mm 		5.000
mm
+0.000 / -0.180 		20.00
mm 		1098465 | BF0120-0140-0050-PJ --- Bushes - 12 mm x 14 mm x 5 mm
Material: Iglidur J    Flange Thickness (s1): 1.00 mm   
Part Number: BF0120-0140-0050-PJ Bushes - 12 mm x 14 mm x 5 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$2.00 AUD
$2.00 AUD
Each
17.000
mm
+0.032 / +0.102 		19.000
mm 		21.000
mm
+0.000 / -0.330 		25.00
mm 		1.00
mm 		1116876 | BF0170-0190-0210-PJ (2 Pcs) --- Bushes - 17 mm x 19 mm x 21 mm
Material: Iglidur J   
Part Number: BF0170-0190-0210-PJ (2 Pcs) Bushes - 17 mm x 19 mm x 21 mm
10 units (20 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 2
17.000
mm
+0.032 / +0.102 		19.000
mm 		21.000
mm
+0.000 / -0.330 		25.00
mm 		1116876 | BF0170-0190-0210-PJ (2 Pcs) --- Bushes - 17 mm x 19 mm x 21 mm
Material: Iglidur J    Flange Thickness (s1): 1.00 mm   
Part Number: BF0170-0190-0210-PJ (2 Pcs) Bushes - 17 mm x 19 mm x 21 mm
10 units (20 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 2