Pulleys - Metric Timing - 8.000mm Pitch - HTD

60 Products in this selection

This is a combined category of products from HTD 8.000mm Pitch Metric Timing Pulleys. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Additional resources:
8mm HTD Timing Belts
Teeth Min. Usable Length (L) Pitch Diameter (PD) Outside Diameter (OD) Indicative
Image
20
Nr. 		250.0
mm 		50.91
mm 		1126175 | P-080H-020-250C --- Pulleys - 20 Teeth x 250 mm x 50.91 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-020-250C Pulleys - 20 Teeth x 250 mm x 50.91 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$475.14 AUD
$475.14 AUD
Each
Teeth Min. Usable Length (L) Pitch Diameter (PD) Outside Diameter (OD) Indicative
Image
20
Nr. 		250.0
mm 		50.91
mm 		1126175 | P-080H-020-250C --- Pulleys - 20 Teeth x 250 mm x 50.91 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-020-250C Pulleys - 20 Teeth x 250 mm x 50.91 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$475.14 AUD
$475.14 AUD
Each
20
Nr. 		250.0
mm 		50.91
mm 		49.56
mm 		1126176 | P-080H-020-250A --- Pulleys - 20 Teeth x 250 mm x 50.91 mm
Material: Aluminium    Shank Diameter (D1): 19.05 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-020-250A Pulleys - 20 Teeth x 250 mm x 50.91 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$253.32 AUD
$253.32 AUD
Each
20
Nr. 		250.0
mm 		50.91
mm 		49.56
mm 		1126176 | P-080H-020-250A --- Pulleys - 20 Teeth x 250 mm x 50.91 mm
Material: Aluminium    Shank Diameter (D1): 19.05 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-020-250A Pulleys - 20 Teeth x 250 mm x 50.91 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$253.32 AUD
$253.32 AUD
Each
21
Nr. 		250.0
mm 		53.45
mm 		1127263 | P-080H-021-250C --- Pulleys - 21 Teeth x 250 mm x 53.45 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-021-250C Pulleys - 21 Teeth x 250 mm x 53.45 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$482.05 AUD
$482.05 AUD
Each
21
Nr. 		250.0
mm 		53.45
mm 		1127263 | P-080H-021-250C --- Pulleys - 21 Teeth x 250 mm x 53.45 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-021-250C Pulleys - 21 Teeth x 250 mm x 53.45 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$482.05 AUD
$482.05 AUD
Each
21
Nr. 		250.0
mm 		53.45
mm 		52.10
mm 		1127264 | P-080H-021-250A --- Pulleys - 21 Teeth x 250 mm x 53.45 mm
Material: Aluminium    Shank Diameter (D1): 19.05 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-021-250A Pulleys - 21 Teeth x 250 mm x 53.45 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$271.77 AUD
$271.77 AUD
Each
21
Nr. 		250.0
mm 		53.45
mm 		52.10
mm 		1127264 | P-080H-021-250A --- Pulleys - 21 Teeth x 250 mm x 53.45 mm
Material: Aluminium    Shank Diameter (D1): 19.05 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-021-250A Pulleys - 21 Teeth x 250 mm x 53.45 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$271.77 AUD
$271.77 AUD
Each
22
Nr. 		250.0
mm 		56
mm 		1128609 | P-080H-022-250C --- Pulleys - 22 Teeth x 250 mm x 56 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-022-250C Pulleys - 22 Teeth x 250 mm x 56 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$519.95 AUD
$519.95 AUD
Each
22
Nr. 		250.0
mm 		56
mm 		1128609 | P-080H-022-250C --- Pulleys - 22 Teeth x 250 mm x 56 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-022-250C Pulleys - 22 Teeth x 250 mm x 56 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$519.95 AUD
$519.95 AUD
Each
22
Nr. 		250.0
mm 		56.00
mm 		54.66
mm 		1128610 | P-080H-022-250A --- Pulleys - 22 Teeth x 250 mm x 56 mm
Material: Aluminium    Shank Diameter (D1): 19.05 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-022-250A Pulleys - 22 Teeth x 250 mm x 56 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$289.77 AUD
$289.77 AUD
Each
22
Nr. 		250.0
mm 		56.00
mm 		54.66
mm 		1128610 | P-080H-022-250A --- Pulleys - 22 Teeth x 250 mm x 56 mm
Material: Aluminium    Shank Diameter (D1): 19.05 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-022-250A Pulleys - 22 Teeth x 250 mm x 56 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$289.77 AUD
$289.77 AUD
Each
23
Nr. 		250.0
mm 		58.54
mm 		1130127 | P-080H-023-250C --- Pulleys - 23 Teeth x 250 mm x 58.54 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-023-250C Pulleys - 23 Teeth x 250 mm x 58.54 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$592.59 AUD
$592.59 AUD
Each
23
Nr. 		250.0
mm 		58.54
mm 		1130127 | P-080H-023-250C --- Pulleys - 23 Teeth x 250 mm x 58.54 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-023-250C Pulleys - 23 Teeth x 250 mm x 58.54 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$592.59 AUD
$592.59 AUD
Each
23
Nr. 		250.0
mm 		58.54
mm 		57.20
mm 		1130128 | P-080H-023-250A --- Pulleys - 23 Teeth x 250 mm x 58.54 mm
Material: Aluminium    Shank Diameter (D1): 19.05 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-023-250A Pulleys - 23 Teeth x 250 mm x 58.54 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$339.23 AUD
$339.23 AUD
Each
23
Nr. 		250.0
mm 		58.54
mm 		57.20
mm 		1130128 | P-080H-023-250A --- Pulleys - 23 Teeth x 250 mm x 58.54 mm
Material: Aluminium    Shank Diameter (D1): 19.05 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-023-250A Pulleys - 23 Teeth x 250 mm x 58.54 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$339.23 AUD
$339.23 AUD
Each
24
Nr. 		250.0
mm 		61.09
mm 		1131783 | P-080H-024-250C --- Pulleys - 24 Teeth x 250 mm x 61.09 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-024-250C Pulleys - 24 Teeth x 250 mm x 61.09 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$597.68 AUD
$597.68 AUD
Each
24
Nr. 		250.0
mm 		61.09
mm 		1131783 | P-080H-024-250C --- Pulleys - 24 Teeth x 250 mm x 61.09 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-024-250C Pulleys - 24 Teeth x 250 mm x 61.09 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$597.68 AUD
$597.68 AUD
Each
24
Nr. 		250.0
mm 		61.09
mm 		59.74
mm 		1131784 | P-080H-024-250A --- Pulleys - 24 Teeth x 250 mm x 61.09 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-024-250A Pulleys - 24 Teeth x 250 mm x 61.09 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$357.86 AUD
$357.86 AUD
Each
24
Nr. 		250.0
mm 		61.09
mm 		59.74
mm 		1131784 | P-080H-024-250A --- Pulleys - 24 Teeth x 250 mm x 61.09 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-024-250A Pulleys - 24 Teeth x 250 mm x 61.09 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$357.86 AUD
$357.86 AUD
Each
25
Nr. 		250.0
mm 		63.63
mm 		1134410 | P-080H-025-250C --- Pulleys - 25 Teeth x 250 mm x 63.63 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-025-250C Pulleys - 25 Teeth x 250 mm x 63.63 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$686.77 AUD
$686.77 AUD
Each
25
Nr. 		250.0
mm 		63.63
mm 		1134410 | P-080H-025-250C --- Pulleys - 25 Teeth x 250 mm x 63.63 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-025-250C Pulleys - 25 Teeth x 250 mm x 63.63 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$686.77 AUD
$686.77 AUD
Each
25
Nr. 		250.0
mm 		63.63
mm 		62.28
mm 		1134411 | P-080H-025-250A --- Pulleys - 25 Teeth x 250 mm x 63.63 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-025-250A Pulleys - 25 Teeth x 250 mm x 63.63 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$381.77 AUD
$381.77 AUD
Each
25
Nr. 		250.0
mm 		63.63
mm 		62.28
mm 		1134411 | P-080H-025-250A --- Pulleys - 25 Teeth x 250 mm x 63.63 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-025-250A Pulleys - 25 Teeth x 250 mm x 63.63 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$381.77 AUD
$381.77 AUD
Each
26
Nr. 		250.0
mm 		66.18
mm 		1137415 | P-080H-026-250C --- Pulleys - 26 Teeth x 250 mm x 66.18 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-026-250C Pulleys - 26 Teeth x 250 mm x 66.18 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$722.14 AUD
$722.14 AUD
Each
26
Nr. 		250.0
mm 		66.18
mm 		1137415 | P-080H-026-250C --- Pulleys - 26 Teeth x 250 mm x 66.18 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-026-250C Pulleys - 26 Teeth x 250 mm x 66.18 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$722.14 AUD
$722.14 AUD
Each
26
Nr. 		250.0
mm 		66.18
mm 		64.85
mm 		1137416 | P-080H-026-250A --- Pulleys - 26 Teeth x 250 mm x 66.18 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-026-250A Pulleys - 26 Teeth x 250 mm x 66.18 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$407.68 AUD
$407.68 AUD
Each
26
Nr. 		250.0
mm 		66.18
mm 		64.85
mm 		1137416 | P-080H-026-250A --- Pulleys - 26 Teeth x 250 mm x 66.18 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-026-250A Pulleys - 26 Teeth x 250 mm x 66.18 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$407.68 AUD
$407.68 AUD
Each
28
Nr. 		200.0
mm 		71.27
mm 		Puleggia dentata 28 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1)
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: Puleggia dentata 28 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) Puleggia dentata 28 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$706.59 AUD
$706.59 AUD
Each
28
Nr. 		200.0
mm 		71.27
mm 		Puleggia dentata 28 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1)
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: Puleggia dentata 28 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) Puleggia dentata 28 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$706.59 AUD
$706.59 AUD
Each
28
Nr. 		250.0
mm 		71.27
mm 		69.93
mm 		Puleggia dentata 28 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1)
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: Puleggia dentata 28 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) Puleggia dentata 28 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$455.41 AUD
$455.41 AUD
Each
28
Nr. 		250.0
mm 		71.27
mm 		69.93
mm 		Puleggia dentata 28 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1)
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: Puleggia dentata 28 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) Puleggia dentata 28 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$455.41 AUD
$455.41 AUD
Each
30
Nr. 		200.0
mm 		76.36
mm 		Puleggia dentata 30 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1)
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: Puleggia dentata 30 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) Puleggia dentata 30 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$792.41 AUD
$792.41 AUD
Each
30
Nr. 		200.0
mm 		76.36
mm 		Puleggia dentata 30 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1)
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: Puleggia dentata 30 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) Puleggia dentata 30 denti x 200 mm - Acciaio al carbonio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$792.41 AUD
$792.41 AUD
Each
30
Nr. 		250.0
mm 		76.36
mm 		75.13
mm 		Puleggia dentata 30 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1)
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: Puleggia dentata 30 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) Puleggia dentata 30 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$507.05 AUD
$507.05 AUD
Each
30
Nr. 		250.0
mm 		76.36
mm 		75.13
mm 		Puleggia dentata 30 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1)
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: Puleggia dentata 30 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) Puleggia dentata 30 denti x 250 mm - Alluminio - Lunghezza stock - Passo curvo lineare HTD 8 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$507.05 AUD
$507.05 AUD
Each
32
Nr. 		200.0
mm 		81.45
mm 		1145945 | P-080H-032-200C --- Pulleys - 32 Teeth x 200 mm x 81.45 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-032-200C Pulleys - 32 Teeth x 200 mm x 81.45 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$848.41 AUD
$848.41 AUD
Each
32
Nr. 		200.0
mm 		81.45
mm 		1145945 | P-080H-032-200C --- Pulleys - 32 Teeth x 200 mm x 81.45 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-032-200C Pulleys - 32 Teeth x 200 mm x 81.45 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$848.41 AUD
$848.41 AUD
Each
32
Nr. 		250.0
mm 		81.45
mm 		80.16
mm 		1145949 | P-080H-032-250A --- Pulleys - 32 Teeth x 250 mm x 81.45 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-032-250A Pulleys - 32 Teeth x 250 mm x 81.45 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$741.86 AUD
$741.86 AUD
Each
32
Nr. 		250.0
mm 		81.45
mm 		80.16
mm 		1145949 | P-080H-032-250A --- Pulleys - 32 Teeth x 250 mm x 81.45 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-032-250A Pulleys - 32 Teeth x 250 mm x 81.45 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$741.86 AUD
$741.86 AUD
Each
34
Nr. 		200.0
mm 		86.54
mm 		1146946 | P-080H-034-200C --- Pulleys - 34 Teeth x 200 mm x 86.54 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-034-200C Pulleys - 34 Teeth x 200 mm x 86.54 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$988.68 AUD
$988.68 AUD
Each
34
Nr. 		200.0
mm 		86.54
mm 		1146946 | P-080H-034-200C --- Pulleys - 34 Teeth x 200 mm x 86.54 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-034-200C Pulleys - 34 Teeth x 200 mm x 86.54 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$988.68 AUD
$988.68 AUD
Each
34
Nr. 		250.0
mm 		86.54
mm 		85.22
mm 		1146952 | P-080H-034-250A --- Pulleys - 34 Teeth x 250 mm x 86.54 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-034-250A Pulleys - 34 Teeth x 250 mm x 86.54 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$617.14 AUD
$617.14 AUD
Each
34
Nr. 		250.0
mm 		86.54
mm 		85.22
mm 		1146952 | P-080H-034-250A --- Pulleys - 34 Teeth x 250 mm x 86.54 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-034-250A Pulleys - 34 Teeth x 250 mm x 86.54 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$617.14 AUD
$617.14 AUD
Each
35
Nr. 		200.0
mm 		89.09
mm 		1148553 | P-080H-035-200C --- Pulleys - 35 Teeth x 200 mm x 89.09 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-035-200C Pulleys - 35 Teeth x 200 mm x 89.09 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$1,032.59 AUD
$1,032.59 AUD
Each
35
Nr. 		200.0
mm 		89.09
mm 		1148553 | P-080H-035-200C --- Pulleys - 35 Teeth x 200 mm x 89.09 mm
Material: Carbon Steel   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-035-200C Pulleys - 35 Teeth x 200 mm x 89.09 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$1,032.59 AUD
$1,032.59 AUD
Each
35
Nr. 		250.0
mm 		89.09
mm 		87.76
mm 		1148562 | P-080H-035-250A --- Pulleys - 35 Teeth x 250 mm x 89.09 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-035-250A Pulleys - 35 Teeth x 250 mm x 89.09 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$643.68 AUD
$643.68 AUD
Each
35
Nr. 		250.0
mm 		89.09
mm 		87.76
mm 		1148562 | P-080H-035-250A --- Pulleys - 35 Teeth x 250 mm x 89.09 mm
Material: Aluminium    Shank Diameter (D1): 25.40 mm    Shank Length (Sl): 25.4 mm   
Category: Pulleys - Metric Timing - 8.000mm Pitch - HTD - Stock
Part Number: P-080H-035-250A Pulleys - 35 Teeth x 250 mm x 89.09 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$643.68 AUD
$643.68 AUD
Each