Pulleys - Inch Timing - 12.700mm Pitch H

143 Products in this selection

This is a combined category of products from 12.700mm Pitch H Inch Timing Pulleys. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Additional resources:
Timing Pulleys Catalogue PDF
H Section Timing Belts
Teeth Max Belt Width (W) Bore (d) Bore Type Locking Type Indicative
Image
20
Nr. 		50.80
mm 		19.050
mm 		Unfinished
 None
 1125542 | P-H-020-508FF-CB-N-0191U --- Pulleys - 20 Teeth x 50.8 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 80.81 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 50.8mm Wide
Part Number: P-H-020-508FF-CB-N-0191U Pulleys - 20 Teeth x 50.8 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$236.23 AUD
$236.23 AUD
Each
Teeth Max Belt Width (W) Bore (d) Bore Type Indicative
Image
20
Nr. 		50.80
mm 		19.050
mm 		Unfinished
 1125542 | P-H-020-508FF-CB-N-0191U --- Pulleys - 20 Teeth x 50.8 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 80.81 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 50.8mm Wide
Part Number: P-H-020-508FF-CB-N-0191U Pulleys - 20 Teeth x 50.8 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$236.23 AUD
$236.23 AUD
Each
20
Nr. 		50.80
mm 		1215
mm 		1125545 | P-H-020-508FF-CB-T1215 --- Pulleys - 20 Teeth x 50.8 mm x 1215
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 80.81 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 50.8mm Wide
Part Number: P-H-020-508FF-CB-T1215 Pulleys - 20 Teeth x 50.8 mm x 1215
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$178.14 AUD
$178.14 AUD
Each
20
Nr. 		50.80
mm 		1215
mm 		1125545 | P-H-020-508FF-CB-T1215 --- Pulleys - 20 Teeth x 50.8 mm x 1215
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 80.81 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 50.8mm Wide
Part Number: P-H-020-508FF-CB-T1215 Pulleys - 20 Teeth x 50.8 mm x 1215
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$178.14 AUD
$178.14 AUD
Each
20
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 None
 1125821 | P-H-020-762FF-CB-N-0191U --- Pulleys - 20 Teeth x 76.2 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 80.81 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide
Part Number: P-H-020-762FF-CB-N-0191U Pulleys - 20 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$324.50 AUD
$324.50 AUD
Each
20
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 1125821 | P-H-020-762FF-CB-N-0191U --- Pulleys - 20 Teeth x 76.2 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 80.81 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide
Part Number: P-H-020-762FF-CB-N-0191U Pulleys - 20 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$324.50 AUD
$324.50 AUD
Each
20
Nr. 		76.20
mm 		1215
mm 		1125822 | P-H-020-762FF-CB-T1215 --- Pulleys - 20 Teeth x 76.2 mm x 1215
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 80.81 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide
Part Number: P-H-020-762FF-CB-T1215 Pulleys - 20 Teeth x 76.2 mm x 1215
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$256.77 AUD
$256.77 AUD
Each
20
Nr. 		76.20
mm 		1215
mm 		1125822 | P-H-020-762FF-CB-T1215 --- Pulleys - 20 Teeth x 76.2 mm x 1215
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 80.81 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide
Part Number: P-H-020-762FF-CB-T1215 Pulleys - 20 Teeth x 76.2 mm x 1215
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$256.77 AUD
$256.77 AUD
Each
20
Nr. 		250.0
mm 		80.81
mm 		79.48
 1126178 | P-H-020-250C --- Pulleys - 20 Teeth x 250 mm x 80.81 mm
Material: Carbon Steel    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-020-250C Pulleys - 20 Teeth x 250 mm x 80.81 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$845.77 AUD
$845.77 AUD
Each
20
Nr. 		250.0
mm 		80.81
mm 		79.48
 1126178 | P-H-020-250C --- Pulleys - 20 Teeth x 250 mm x 80.81 mm
Material: Carbon Steel    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-020-250C Pulleys - 20 Teeth x 250 mm x 80.81 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$845.77 AUD
$845.77 AUD
Each
20
Nr. 		250.0
mm 		80.81
mm 		79.48
 1126179 | P-H-020-250A --- Pulleys - 20 Teeth x 250 mm x 80.81 mm
Material: Aluminum    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-020-250A Pulleys - 20 Teeth x 250 mm x 80.81 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$461.32 AUD
$461.32 AUD
Each
20
Nr. 		250.0
mm 		80.81
mm 		79.48
 1126179 | P-H-020-250A --- Pulleys - 20 Teeth x 250 mm x 80.81 mm
Material: Aluminum    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-020-250A Pulleys - 20 Teeth x 250 mm x 80.81 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$461.32 AUD
$461.32 AUD
Each
21
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 None
 1127142 | P-H-021-254FF-CB-N-0191U --- Pulleys - 21 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 84.86 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide
Part Number: P-H-021-254FF-CB-N-0191U Pulleys - 21 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$187.68 AUD
$187.68 AUD
Each
21
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 1127142 | P-H-021-254FF-CB-N-0191U --- Pulleys - 21 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 84.86 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide
Part Number: P-H-021-254FF-CB-N-0191U Pulleys - 21 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$187.68 AUD
$187.68 AUD
Each
21
Nr. 		38.10
mm 		19.050
mm 		Unfinished
 None
 1127157 | P-H-021-381FF-CB-N-0191U --- Pulleys - 21 Teeth x 38.1 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 84.86 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 38.1mm Wide
Part Number: P-H-021-381FF-CB-N-0191U Pulleys - 21 Teeth x 38.1 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$218.14 AUD
$218.14 AUD
Each
21
Nr. 		38.10
mm 		19.050
mm 		Unfinished
 1127157 | P-H-021-381FF-CB-N-0191U --- Pulleys - 21 Teeth x 38.1 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 84.86 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 38.1mm Wide
Part Number: P-H-021-381FF-CB-N-0191U Pulleys - 21 Teeth x 38.1 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$218.14 AUD
$218.14 AUD
Each
21
Nr. 		50.80
mm 		25.400
mm 		Unfinished
 None
 1127177 | P-H-021-508FF-CB-N-0254U --- Pulleys - 21 Teeth x 50.8 mm x 25.4 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 84.86 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 50.8mm Wide
Part Number: P-H-021-508FF-CB-N-0254U Pulleys - 21 Teeth x 50.8 mm x 25.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$257.41 AUD
$257.41 AUD
Each
21
Nr. 		50.80
mm 		25.400
mm 		Unfinished
 1127177 | P-H-021-508FF-CB-N-0254U --- Pulleys - 21 Teeth x 50.8 mm x 25.4 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 84.86 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 50.8mm Wide
Part Number: P-H-021-508FF-CB-N-0254U Pulleys - 21 Teeth x 50.8 mm x 25.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$257.41 AUD
$257.41 AUD
Each
21
Nr. 		250.0
mm 		84.86
mm 		83.52
 1127266 | P-H-021-250C --- Pulleys - 21 Teeth x 250 mm x 84.86 mm
Material: Carbon Steel    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-021-250C Pulleys - 21 Teeth x 250 mm x 84.86 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$904.68 AUD
$904.68 AUD
Each
21
Nr. 		250.0
mm 		84.86
mm 		83.52
 1127266 | P-H-021-250C --- Pulleys - 21 Teeth x 250 mm x 84.86 mm
Material: Carbon Steel    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-021-250C Pulleys - 21 Teeth x 250 mm x 84.86 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$904.68 AUD
$904.68 AUD
Each
21
Nr. 		250.0
mm 		84.86
mm 		83.52
 1127267 | P-H-021-250A --- Pulleys - 21 Teeth x 250 mm x 84.86 mm
Material: Aluminum    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-021-250A Pulleys - 21 Teeth x 250 mm x 84.86 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$506.41 AUD
$506.41 AUD
Each
21
Nr. 		250.0
mm 		84.86
mm 		83.52
 1127267 | P-H-021-250A --- Pulleys - 21 Teeth x 250 mm x 84.86 mm
Material: Aluminum    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-021-250A Pulleys - 21 Teeth x 250 mm x 84.86 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$506.41 AUD
$506.41 AUD
Each
22
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 None
 1128166 | P-H-022-254FF-CB-N-0191U --- Pulleys - 22 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide
Part Number: P-H-022-254FF-CB-N-0191U Pulleys - 22 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$213.23 AUD
$213.23 AUD
Each
22
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 1128166 | P-H-022-254FF-CB-N-0191U --- Pulleys - 22 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide
Part Number: P-H-022-254FF-CB-N-0191U Pulleys - 22 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$213.23 AUD
$213.23 AUD
Each
22
Nr. 		25.40
mm 		1610
mm 		Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide
Part Number: Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$116.05 AUD
$116.05 AUD
Each
22
Nr. 		25.40
mm 		1610
mm 		Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide
Part Number: Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$116.05 AUD
$116.05 AUD
Each
22
Nr. 		38.10
mm 		19.050
mm 		Unfinished
 None
 1128364 | P-H-022-381FF-CB-N-0191U --- Pulleys - 22 Teeth x 38.1 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 38.1mm Wide
Part Number: P-H-022-381FF-CB-N-0191U Pulleys - 22 Teeth x 38.1 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$243.95 AUD
$243.95 AUD
Each
22
Nr. 		38.10
mm 		19.050
mm 		Unfinished
 1128364 | P-H-022-381FF-CB-N-0191U --- Pulleys - 22 Teeth x 38.1 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 38.1mm Wide
Part Number: P-H-022-381FF-CB-N-0191U Pulleys - 22 Teeth x 38.1 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$243.95 AUD
$243.95 AUD
Each
22
Nr. 		38.10
mm 		1615
mm 		Puleggia dentata 22 denti x 38,1 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 38.1mm Wide
Part Number: Puleggia dentata 22 denti x 38,1 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 22 denti x 38,1 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$154.95 AUD
$154.95 AUD
Each
22
Nr. 		38.10
mm 		1615
mm 		Puleggia dentata 22 denti x 38,1 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 38.1mm Wide
Part Number: Puleggia dentata 22 denti x 38,1 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 22 denti x 38,1 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$154.95 AUD
$154.95 AUD
Each
22
Nr. 		50.80
mm 		25.400
mm 		Unfinished
 None
 1128460 | P-H-022-508FF-CB-N-0254U --- Pulleys - 22 Teeth x 50.8 mm x 25.4 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 50.8mm Wide
Part Number: P-H-022-508FF-CB-N-0254U Pulleys - 22 Teeth x 50.8 mm x 25.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$283.95 AUD
$283.95 AUD
Each
22
Nr. 		50.80
mm 		25.400
mm 		Unfinished
 1128460 | P-H-022-508FF-CB-N-0254U --- Pulleys - 22 Teeth x 50.8 mm x 25.4 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 50.8mm Wide
Part Number: P-H-022-508FF-CB-N-0254U Pulleys - 22 Teeth x 50.8 mm x 25.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$283.95 AUD
$283.95 AUD
Each
22
Nr. 		50.80
mm 		1615
mm 		Puleggia dentata 22 denti x 50,8 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 50.8mm Wide
Part Number: Puleggia dentata 22 denti x 50,8 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 22 denti x 50,8 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$193.86 AUD
$193.86 AUD
Each
22
Nr. 		50.80
mm 		1615
mm 		Puleggia dentata 22 denti x 50,8 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 50.8mm Wide
Part Number: Puleggia dentata 22 denti x 50,8 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 22 denti x 50,8 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$193.86 AUD
$193.86 AUD
Each
22
Nr. 		76.20
mm 		1615
mm 		Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide
Part Number: Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$282.41 AUD
$282.41 AUD
Each
22
Nr. 		76.20
mm 		1615
mm 		Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide
Part Number: Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$282.41 AUD
$282.41 AUD
Each
22
Nr. 		250.0
mm 		88.90
mm 		87.55
 1128612 | P-H-022-250A --- Pulleys - 22 Teeth x 250 mm x 88.9 mm
Material: Aluminum    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-022-250A Pulleys - 22 Teeth x 250 mm x 88.9 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$557.68 AUD
$557.68 AUD
Each
22
Nr. 		250.0
mm 		88.90
mm 		87.55
 1128612 | P-H-022-250A --- Pulleys - 22 Teeth x 250 mm x 88.9 mm
Material: Aluminum    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-022-250A Pulleys - 22 Teeth x 250 mm x 88.9 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$557.68 AUD
$557.68 AUD
Each
22
Nr. 		250.0
mm 		88.90
mm 		87.55
 1128613 | P-H-022-250C --- Pulleys - 22 Teeth x 250 mm x 88.9 mm
Material: Carbon Steel    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-022-250C Pulleys - 22 Teeth x 250 mm x 88.9 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$1,000.41 AUD
$1,000.41 AUD
Each
22
Nr. 		250.0
mm 		88.90
mm 		87.55
 1128613 | P-H-022-250C --- Pulleys - 22 Teeth x 250 mm x 88.9 mm
Material: Carbon Steel    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-022-250C Pulleys - 22 Teeth x 250 mm x 88.9 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$1,000.41 AUD
$1,000.41 AUD
Each
23
Nr. 		250.0
mm 		92.94
mm 		91.64
 1130131 | P-H-023-250C --- Pulleys - 23 Teeth x 250 mm x 92.94 mm
Material: Carbon Steel    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-023-250C Pulleys - 23 Teeth x 250 mm x 92.94 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$1,078.23 AUD
$1,078.23 AUD
Each
23
Nr. 		250.0
mm 		92.94
mm 		91.64
 1130131 | P-H-023-250C --- Pulleys - 23 Teeth x 250 mm x 92.94 mm
Material: Carbon Steel    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-023-250C Pulleys - 23 Teeth x 250 mm x 92.94 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$1,078.23 AUD
$1,078.23 AUD
Each
23
Nr. 		250.0
mm 		92.94
mm 		91.64
 1130132 | P-H-023-250A --- Pulleys - 23 Teeth x 250 mm x 92.94 mm
Material: Aluminum    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-023-250A Pulleys - 23 Teeth x 250 mm x 92.94 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$612.05 AUD
$612.05 AUD
Each
23
Nr. 		250.0
mm 		92.94
mm 		91.64
 1130132 | P-H-023-250A --- Pulleys - 23 Teeth x 250 mm x 92.94 mm
Material: Aluminum    Pitch Dia. (PD): 25.40 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - Stock
Part Number: P-H-023-250A Pulleys - 23 Teeth x 250 mm x 92.94 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$612.05 AUD
$612.05 AUD
Each
24
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 None
 1131184 | P-H-024-254FF-CB-N-0191U --- Pulleys - 24 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 96.98 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide
Part Number: P-H-024-254FF-CB-N-0191U Pulleys - 24 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$243.32 AUD
$243.32 AUD
Each
24
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 1131184 | P-H-024-254FF-CB-N-0191U --- Pulleys - 24 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 96.98 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide
Part Number: P-H-024-254FF-CB-N-0191U Pulleys - 24 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$243.32 AUD
$243.32 AUD
Each
24
Nr. 		25.40
mm 		1610
mm 		1131188 | P-H-024-254FF-SB-T1610 --- Pulleys - 24 Teeth x 25.4 mm x 1610
Material: Cast Iron - Black Oxide    Type: 2    Pitch Dia. (PD): 96.98 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide
Part Number: P-H-024-254FF-SB-T1610 Pulleys - 24 Teeth x 25.4 mm x 1610
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$140.32 AUD
$140.32 AUD
Each
24
Nr. 		25.40
mm 		1610
mm 		1131188 | P-H-024-254FF-SB-T1610 --- Pulleys - 24 Teeth x 25.4 mm x 1610
Material: Cast Iron - Black Oxide    Type: 2    Pitch Dia. (PD): 96.98 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide
Part Number: P-H-024-254FF-SB-T1610 Pulleys - 24 Teeth x 25.4 mm x 1610
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$140.32 AUD
$140.32 AUD
Each