Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide

25 Products in this selection

This is a combined category of products from 25.4mm Wide 12.700mm Pitch H Inch Timing Pulleys. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Additional resources:
Timing Pulleys Catalogue PDF
H Section Timing Belts
Teeth Max Belt Width (W) Bore (d) Bore Type Locking Type Indicative
Image
14
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 None
 Puleggia dentata 14 denti x 25,4 di larghezza - Foro liscio non finito da 15,875 mm - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 56.57 mm    Flange Diameter (FD): 62.5 mm    Overall Length: 47.6 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: Puleggia dentata 14 denti x 25,4 di larghezza - Foro liscio non finito da 15,875 mm - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 14 denti x 25,4 di larghezza - Foro liscio non finito da 15,875 mm - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$96.32 AUD
$96.32 AUD
Each
Teeth Max Belt Width (W) Bore (d) Bore Type Indicative
Image
14
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 Puleggia dentata 14 denti x 25,4 di larghezza - Foro liscio non finito da 15,875 mm - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Steel - Black Oxide    Locking Type: None    Type: 2    Pitch Dia. (PD): 56.57 mm    Flange Diameter (FD): 62.5 mm    Overall Length: 47.6 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: Puleggia dentata 14 denti x 25,4 di larghezza - Foro liscio non finito da 15,875 mm - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 14 denti x 25,4 di larghezza - Foro liscio non finito da 15,875 mm - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$96.32 AUD
$96.32 AUD
Each
14
Nr. 		25.40
mm 		1008
mm 		1107483 | P-H-014-254FF-SB-T1008 --- Pulleys - 14 Teeth x 25.4 mm x 1008
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 56.57 mm    Flange Diameter (FD): 62.5 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-014-254FF-SB-T1008 Pulleys - 14 Teeth x 25.4 mm x 1008
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$91.77 AUD
$91.77 AUD
Each
14
Nr. 		25.40
mm 		1008
mm 		1107483 | P-H-014-254FF-SB-T1008 --- Pulleys - 14 Teeth x 25.4 mm x 1008
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 56.57 mm    Flange Diameter (FD): 62.5 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-014-254FF-SB-T1008 Pulleys - 14 Teeth x 25.4 mm x 1008
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$91.77 AUD
$91.77 AUD
Each
14
Nr. 		25.40
mm 		1108
mm 		1107484 | P-H-014-254FF-SB-T1108 --- Pulleys - 14 Teeth x 25.4 mm x 1108
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 56.57 mm    Flange Diameter (FD): 62.5 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-014-254FF-SB-T1108 Pulleys - 14 Teeth x 25.4 mm x 1108
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$89.86 AUD
$89.86 AUD
Each
14
Nr. 		25.40
mm 		1108
mm 		1107484 | P-H-014-254FF-SB-T1108 --- Pulleys - 14 Teeth x 25.4 mm x 1108
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 56.57 mm    Flange Diameter (FD): 62.5 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-014-254FF-SB-T1108 Pulleys - 14 Teeth x 25.4 mm x 1108
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$89.86 AUD
$89.86 AUD
Each
16
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 None
 1115117 | P-H-016-254FF-SB-N-0159U --- Pulleys - 16 Teeth x 25.4 mm x 15.875 mm
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 64.65 mm    Flange Diameter (FD): 70.6 mm    Overall Length: 50.8 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-016-254FF-SB-N-0159U Pulleys - 16 Teeth x 25.4 mm x 15.875 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$116.23 AUD
$116.23 AUD
Each
16
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 1115117 | P-H-016-254FF-SB-N-0159U --- Pulleys - 16 Teeth x 25.4 mm x 15.875 mm
Material: Steel - Black Oxide    Locking Type: None    Type: 2    Pitch Dia. (PD): 64.65 mm    Flange Diameter (FD): 70.6 mm    Overall Length: 50.8 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-016-254FF-SB-N-0159U Pulleys - 16 Teeth x 25.4 mm x 15.875 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$116.23 AUD
$116.23 AUD
Each
16
Nr. 		25.40
mm 		1008
mm 		1115124 | P-H-016-254FF-SB-T1008 --- Pulleys - 16 Teeth x 25.4 mm x 1008
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 64.65 mm    Flange Diameter (FD): 70.6 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-016-254FF-SB-T1008 Pulleys - 16 Teeth x 25.4 mm x 1008
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$95.14 AUD
$95.14 AUD
Each
16
Nr. 		25.40
mm 		1008
mm 		1115124 | P-H-016-254FF-SB-T1008 --- Pulleys - 16 Teeth x 25.4 mm x 1008
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 64.65 mm    Flange Diameter (FD): 70.6 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-016-254FF-SB-T1008 Pulleys - 16 Teeth x 25.4 mm x 1008
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$95.14 AUD
$95.14 AUD
Each
16
Nr. 		25.40
mm 		1108
mm 		1115125 | P-H-016-254FF-SB-T1108 --- Pulleys - 16 Teeth x 25.4 mm x 1108
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 64.65 mm    Flange Diameter (FD): 70.6 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-016-254FF-SB-T1108 Pulleys - 16 Teeth x 25.4 mm x 1108
1 Available
| Backorders for more can be expected around Sat, Jan 25, 2025
$100.14 AUD
$100.14 AUD
Each
16
Nr. 		25.40
mm 		1108
mm 		1115125 | P-H-016-254FF-SB-T1108 --- Pulleys - 16 Teeth x 25.4 mm x 1108
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 64.65 mm    Flange Diameter (FD): 70.6 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-016-254FF-SB-T1108 Pulleys - 16 Teeth x 25.4 mm x 1108
1 Available
| | Backorders for more can be expected around Sat, Jan 25, 2025
$100.14 AUD
$100.14 AUD
Each
17
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 None
 1117000 | P-H-017-254FF-SB-N-0159U --- Pulleys - 17 Teeth x 25.4 mm x 15.875 mm
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 68.69 mm    Flange Diameter (FD): 76.2 mm    Overall Length: 50.8 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-017-254FF-SB-N-0159U Pulleys - 17 Teeth x 25.4 mm x 15.875 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$128.86 AUD
$128.86 AUD
Each
17
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 1117000 | P-H-017-254FF-SB-N-0159U --- Pulleys - 17 Teeth x 25.4 mm x 15.875 mm
Material: Steel - Black Oxide    Locking Type: None    Type: 2    Pitch Dia. (PD): 68.69 mm    Flange Diameter (FD): 76.2 mm    Overall Length: 50.8 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-017-254FF-SB-N-0159U Pulleys - 17 Teeth x 25.4 mm x 15.875 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$128.86 AUD
$128.86 AUD
Each
18
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 None
 1119025 | P-H-018-254FF-SB-N-0159U --- Pulleys - 18 Teeth x 25.4 mm x 15.875 mm
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 72.73 mm    Flange Diameter (FD): 78.7 mm    Overall Length: 50.8 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-018-254FF-SB-N-0159U Pulleys - 18 Teeth x 25.4 mm x 15.875 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$142.59 AUD
$142.59 AUD
Each
18
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 1119025 | P-H-018-254FF-SB-N-0159U --- Pulleys - 18 Teeth x 25.4 mm x 15.875 mm
Material: Steel - Black Oxide    Locking Type: None    Type: 2    Pitch Dia. (PD): 72.73 mm    Flange Diameter (FD): 78.7 mm    Overall Length: 50.8 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-018-254FF-SB-N-0159U Pulleys - 18 Teeth x 25.4 mm x 15.875 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$142.59 AUD
$142.59 AUD
Each
18
Nr. 		25.40
mm 		1210
mm 		1119028 | P-H-018-254FF-SB-T1210 --- Pulleys - 18 Teeth x 25.4 mm x 1210
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 72.73 mm    Flange Diameter (FD): 78.7 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-018-254FF-SB-T1210 Pulleys - 18 Teeth x 25.4 mm x 1210
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$96.59 AUD
$96.59 AUD
Each
18
Nr. 		25.40
mm 		1210
mm 		1119028 | P-H-018-254FF-SB-T1210 --- Pulleys - 18 Teeth x 25.4 mm x 1210
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 72.73 mm    Flange Diameter (FD): 78.7 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-018-254FF-SB-T1210 Pulleys - 18 Teeth x 25.4 mm x 1210
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$96.59 AUD
$96.59 AUD
Each
19
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 None
 1120101 | P-H-019-254FF-SB-N-0159U --- Pulleys - 19 Teeth x 25.4 mm x 15.875 mm
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 76.77 mm    Flange Diameter (FD): 82.7 mm    Overall Length: 50.8 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-019-254FF-SB-N-0159U Pulleys - 19 Teeth x 25.4 mm x 15.875 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$163.95 AUD
$163.95 AUD
Each
19
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 1120101 | P-H-019-254FF-SB-N-0159U --- Pulleys - 19 Teeth x 25.4 mm x 15.875 mm
Material: Steel - Black Oxide    Locking Type: None    Type: 2    Pitch Dia. (PD): 76.77 mm    Flange Diameter (FD): 82.7 mm    Overall Length: 50.8 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-019-254FF-SB-N-0159U Pulleys - 19 Teeth x 25.4 mm x 15.875 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$163.95 AUD
$163.95 AUD
Each
20
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 None
 1124558 | P-H-020-254FF-CB-N-0159U --- Pulleys - 20 Teeth x 25.4 mm x 15.875 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 80.81 mm    Flange Diameter (FD): 86.9 mm    Overall Length: 50.8 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-020-254FF-CB-N-0159U Pulleys - 20 Teeth x 25.4 mm x 15.875 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$166.14 AUD
$166.14 AUD
Each
20
Nr. 		25.40
mm 		15.875
mm 		Unfinished
 1124558 | P-H-020-254FF-CB-N-0159U --- Pulleys - 20 Teeth x 25.4 mm x 15.875 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 80.81 mm    Flange Diameter (FD): 86.9 mm    Overall Length: 50.8 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-020-254FF-CB-N-0159U Pulleys - 20 Teeth x 25.4 mm x 15.875 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$166.14 AUD
$166.14 AUD
Each
20
Nr. 		25.40
mm 		1210
mm 		1124564 | P-H-020-254FF-SB-T1210 --- Pulleys - 20 Teeth x 25.4 mm x 1210
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 80.81 mm    Flange Diameter (FD): 82.7 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-020-254FF-SB-T1210 Pulleys - 20 Teeth x 25.4 mm x 1210
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$107.77 AUD
$107.77 AUD
Each
20
Nr. 		25.40
mm 		1210
mm 		1124564 | P-H-020-254FF-SB-T1210 --- Pulleys - 20 Teeth x 25.4 mm x 1210
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 80.81 mm    Flange Diameter (FD): 82.7 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-020-254FF-SB-T1210 Pulleys - 20 Teeth x 25.4 mm x 1210
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$107.77 AUD
$107.77 AUD
Each
21
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 None
 1127142 | P-H-021-254FF-CB-N-0191U --- Pulleys - 21 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 84.86 mm    Flange Diameter (FD): 90.8 mm    Overall Length: 54.0 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-021-254FF-CB-N-0191U Pulleys - 21 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$187.68 AUD
$187.68 AUD
Each
21
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 1127142 | P-H-021-254FF-CB-N-0191U --- Pulleys - 21 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 84.86 mm    Flange Diameter (FD): 90.8 mm    Overall Length: 54.0 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-021-254FF-CB-N-0191U Pulleys - 21 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$187.68 AUD
$187.68 AUD
Each
22
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 None
 1128166 | P-H-022-254FF-CB-N-0191U --- Pulleys - 22 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm    Flange Diameter (FD): 94.9 mm    Overall Length: 57.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-022-254FF-CB-N-0191U Pulleys - 22 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$213.23 AUD
$213.23 AUD
Each
22
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 1128166 | P-H-022-254FF-CB-N-0191U --- Pulleys - 22 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 88.90 mm    Flange Diameter (FD): 94.9 mm    Overall Length: 57.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-022-254FF-CB-N-0191U Pulleys - 22 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$213.23 AUD
$213.23 AUD
Each
22
Nr. 		25.40
mm 		1610
mm 		Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 88.90 mm    Flange Diameter (FD): 94.9 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$116.05 AUD
$116.05 AUD
Each
22
Nr. 		25.40
mm 		1610
mm 		Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 88.90 mm    Flange Diameter (FD): 94.9 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 22 denti x 25,4 di larghezza - Alesaggio conico 1610 - Acciaio - Ossido nero - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$116.05 AUD
$116.05 AUD
Each
24
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 None
 1131184 | P-H-024-254FF-CB-N-0191U --- Pulleys - 24 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 96.98 mm    Flange Diameter (FD): 102.9 mm    Overall Length: 57.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-024-254FF-CB-N-0191U Pulleys - 24 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$243.32 AUD
$243.32 AUD
Each
24
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 1131184 | P-H-024-254FF-CB-N-0191U --- Pulleys - 24 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 96.98 mm    Flange Diameter (FD): 102.9 mm    Overall Length: 57.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-024-254FF-CB-N-0191U Pulleys - 24 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$243.32 AUD
$243.32 AUD
Each
24
Nr. 		25.40
mm 		1610
mm 		1131188 | P-H-024-254FF-SB-T1610 --- Pulleys - 24 Teeth x 25.4 mm x 1610
Material: Cast Iron - Black Oxide    Type: 2    Pitch Dia. (PD): 96.98 mm    Flange Diameter (FD): 102.9 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-024-254FF-SB-T1610 Pulleys - 24 Teeth x 25.4 mm x 1610
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$140.32 AUD
$140.32 AUD
Each
24
Nr. 		25.40
mm 		1610
mm 		1131188 | P-H-024-254FF-SB-T1610 --- Pulleys - 24 Teeth x 25.4 mm x 1610
Material: Cast Iron - Black Oxide    Type: 2    Pitch Dia. (PD): 96.98 mm    Flange Diameter (FD): 102.9 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-024-254FF-SB-T1610 Pulleys - 24 Teeth x 25.4 mm x 1610
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$140.32 AUD
$140.32 AUD
Each
26
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 None
 1137221 | P-H-026-254FF-CB-N-0191U --- Pulleys - 26 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 105.06 mm    Flange Diameter (FD): 111.0 mm    Overall Length: 60.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-026-254FF-CB-N-0191U Pulleys - 26 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$282.32 AUD
$282.32 AUD
Each
26
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 1137221 | P-H-026-254FF-CB-N-0191U --- Pulleys - 26 Teeth x 25.4 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 105.06 mm    Flange Diameter (FD): 111.0 mm    Overall Length: 60.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: P-H-026-254FF-CB-N-0191U Pulleys - 26 Teeth x 25.4 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$282.32 AUD
$282.32 AUD
Each
26
Nr. 		25.40
mm 		2012
mm 		1137223 | P-H-026-254FF-SB-T2012 --- Pulleys - 26 Teeth x 25.4 mm x 2012
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 105.06 mm    Flange Diameter (FD): 111.0 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-026-254FF-SB-T2012 Pulleys - 26 Teeth x 25.4 mm x 2012
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$145.23 AUD
$145.23 AUD
Each
26
Nr. 		25.40
mm 		2012
mm 		1137223 | P-H-026-254FF-SB-T2012 --- Pulleys - 26 Teeth x 25.4 mm x 2012
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 105.06 mm    Flange Diameter (FD): 111.0 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-026-254FF-SB-T2012 Pulleys - 26 Teeth x 25.4 mm x 2012
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$145.23 AUD
$145.23 AUD
Each
28
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 None
 Puleggia dentata 28 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 113.14 mm    Flange Diameter (FD): 119.1 mm    Overall Length: 60.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: Puleggia dentata 28 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 28 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$304.95 AUD
$304.95 AUD
Each
28
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 Puleggia dentata 28 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 113.14 mm    Flange Diameter (FD): 119.1 mm    Overall Length: 60.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: Puleggia dentata 28 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 28 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$304.95 AUD
$304.95 AUD
Each
28
Nr. 		25.40
mm 		2012
mm 		1138883 | P-H-028-254FF-SB-T2012 --- Pulleys - 28 Teeth x 25.4 mm x 2012
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 113.14 mm    Flange Diameter (FD): 119.1 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-028-254FF-SB-T2012 Pulleys - 28 Teeth x 25.4 mm x 2012
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$185.32 AUD
$185.32 AUD
Each
28
Nr. 		25.40
mm 		2012
mm 		1138883 | P-H-028-254FF-SB-T2012 --- Pulleys - 28 Teeth x 25.4 mm x 2012
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 113.14 mm    Flange Diameter (FD): 119.1 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-028-254FF-SB-T2012 Pulleys - 28 Teeth x 25.4 mm x 2012
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$185.32 AUD
$185.32 AUD
Each
30
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 None
 Puleggia dentata 30 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 121.22 mm    Flange Diameter (FD): 127.1 mm    Overall Length: 60.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: Puleggia dentata 30 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 30 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$344.59 AUD
$344.59 AUD
Each
30
Nr. 		25.40
mm 		19.050
mm 		Unfinished
 Puleggia dentata 30 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 121.22 mm    Flange Diameter (FD): 127.1 mm    Overall Length: 60.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Through Bore
Part Number: Puleggia dentata 30 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 30 denti x 25,4 di larghezza - Foro liscio non finito 19,05 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$344.59 AUD
$344.59 AUD
Each
30
Nr. 		25.40
mm 		2012
mm 		1141415 | P-H-030-254FF-SB-T2012 --- Pulleys - 30 Teeth x 25.4 mm x 2012
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 121.22 mm    Flange Diameter (FD): 127.0 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-030-254FF-SB-T2012 Pulleys - 30 Teeth x 25.4 mm x 2012
1 Available
| Backorders for more can be expected around Sat, Jan 25, 2025
$259.50 AUD
$259.50 AUD
Each
30
Nr. 		25.40
mm 		2012
mm 		1141415 | P-H-030-254FF-SB-T2012 --- Pulleys - 30 Teeth x 25.4 mm x 2012
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 121.22 mm    Flange Diameter (FD): 127.0 mm    Overall Length: 33.3 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-030-254FF-SB-T2012 Pulleys - 30 Teeth x 25.4 mm x 2012
1 Available
| | Backorders for more can be expected around Sat, Jan 25, 2025
$259.50 AUD
$259.50 AUD
Each
40
Nr. 		25.40
mm 		2517
mm 		1153388 | P-H-040-254FF-SB-T2517 --- Pulleys - 40 Teeth x 25.4 mm x 2517
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 161.63 mm    Flange Diameter (FD): 167.6 mm    Overall Length: 59.5 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-040-254FF-SB-T2517 Pulleys - 40 Teeth x 25.4 mm x 2517
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$385.23 AUD
$385.23 AUD
Each
40
Nr. 		25.40
mm 		2517
mm 		1153388 | P-H-040-254FF-SB-T2517 --- Pulleys - 40 Teeth x 25.4 mm x 2517
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 161.63 mm    Flange Diameter (FD): 167.6 mm    Overall Length: 59.5 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 25.4mm Wide - Taperlock
Part Number: P-H-040-254FF-SB-T2517 Pulleys - 40 Teeth x 25.4 mm x 2517
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$385.23 AUD
$385.23 AUD
Each