Plungers - Indexing - Grip - Steel - With Nut

48 Products in this selection
  • Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.
Thread (B) Thread Length (F) Initial End Force Final End Force Tip Diameter (A) Tip Length (E) Indicative
Image
3/8-16 UNC (9.525mm)
 20.0
mm 		0.4
N 		0.8
N 		4.0
mm 		6.0
mm 		1087970 | PLIT-040-095C-10-G-C-N --- Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.4 N
Material: Steel    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-040-095C-10-G-C-N Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.4 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$72.14 AUD
$72.14 AUD
Each
Thread (B) Thread Length (F) Initial End Force Final End Force Indicative
Image
3/8-16 UNC (9.525mm)
 20.0
mm 		0.4
N 		0.8
N 		1087970 | PLIT-040-095C-10-G-C-N --- Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.4 N
Material: Steel    Tip Diameter (A): 4.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-040-095C-10-G-C-N Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.4 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$72.14 AUD
$72.14 AUD
Each
3/8-16 UNC (9.525mm)
 20.0
mm 		0.5
N 		0.8
N 		5.0
mm 		6.0
mm 		1087974 | PLIT-050-095C-10-G-C-N --- Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.5 N
Material: Steel    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-050-095C-10-G-C-N Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$67.86 AUD
$67.86 AUD
Each
3/8-16 UNC (9.525mm)
 20.0
mm 		0.5
N 		0.8
N 		1087974 | PLIT-050-095C-10-G-C-N --- Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-050-095C-10-G-C-N Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$67.86 AUD
$67.86 AUD
Each
3/8-16 UNC (9.525mm)
 20.0
mm 		0.6
N 		0.8
N 		6.0
mm 		6.0
mm 		1087979 | PLIT-060-095C-10-G-C-N --- Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.6 N
Material: Steel    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-060-095C-10-G-C-N Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$75.50 AUD
$75.50 AUD
Each
3/8-16 UNC (9.525mm)
 20.0
mm 		0.6
N 		0.8
N 		1087979 | PLIT-060-095C-10-G-C-N --- Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.6 N
Material: Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-060-095C-10-G-C-N Plungers - 3/8-16 UNC (9.525mm) x 20 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$75.50 AUD
$75.50 AUD
Each
3/8-24 UNF (9.525mm)
 20.0
mm 		0.4
N 		0.8
N 		4.0
mm 		6.0
mm 		1089251 | PLIT-040-095F-10-G-C-N --- Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.4 N
Material: Steel    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-040-095F-10-G-C-N Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.4 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$44.50 AUD
$44.50 AUD
Each
3/8-24 UNF (9.525mm)
 20.0
mm 		0.4
N 		0.8
N 		1089251 | PLIT-040-095F-10-G-C-N --- Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.4 N
Material: Steel    Tip Diameter (A): 4.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-040-095F-10-G-C-N Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.4 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$44.50 AUD
$44.50 AUD
Each
3/8-24 UNF (9.525mm)
 20.0
mm 		0.5
N 		0.8
N 		5.0
mm 		6.0
mm 		1089255 | PLIT-050-095F-10-G-C-N --- Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.5 N
Material: Steel    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-050-095F-10-G-C-N Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$71.50 AUD
$71.50 AUD
Each
3/8-24 UNF (9.525mm)
 20.0
mm 		0.5
N 		0.8
N 		1089255 | PLIT-050-095F-10-G-C-N --- Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-050-095F-10-G-C-N Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$71.50 AUD
$71.50 AUD
Each
3/8-24 UNF (9.525mm)
 20.0
mm 		0.6
N 		0.8
N 		6.0
mm 		6.0
mm 		1089258 | PLIT-060-095F-10-G-C-N --- Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.6 N
Material: Steel    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-060-095F-10-G-C-N Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$71.68 AUD
$71.68 AUD
Each
3/8-24 UNF (9.525mm)
 20.0
mm 		0.6
N 		0.8
N 		1089258 | PLIT-060-095F-10-G-C-N --- Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.6 N
Material: Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
Part Number: PLIT-060-095F-10-G-C-N Plungers - 3/8-24 UNF (9.525mm) x 20 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$71.68 AUD
$71.68 AUD
Each
M10.0x1.50 (10.0mm)
 20.0
mm 		0.4
N 		0.8
N 		4.0
mm 		6.0
mm 		1092887 | PLIT-040-100-150-10-G-C-N --- Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.4 N
Material: Steel    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-040-100-150-10-G-C-N Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.4 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$44.68 AUD
$44.68 AUD
Each
M10.0x1.50 (10.0mm)
 20.0
mm 		0.4
N 		0.8
N 		1092887 | PLIT-040-100-150-10-G-C-N --- Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.4 N
Material: Steel    Tip Diameter (A): 4.0 mm    Tip Length (E): 6.0 mm    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-040-100-150-10-G-C-N Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.4 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$44.68 AUD
$44.68 AUD
Each
M10x1 (10.0mm)
 20.0
mm 		0.4
N 		0.8
N 		4.0
mm 		6.0
mm 		1092892 | PLIT-040-100-100-10-G-C-N --- Plungers - M10x1 (10.0mm) x 20 mm x 0.4 N
Material: Steel    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-040-100-100-10-G-C-N Plungers - M10x1 (10.0mm) x 20 mm x 0.4 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$71.59 AUD
$71.59 AUD
Each
M10x1 (10.0mm)
 20.0
mm 		0.4
N 		0.8
N 		1092892 | PLIT-040-100-100-10-G-C-N --- Plungers - M10x1 (10.0mm) x 20 mm x 0.4 N
Material: Steel    Tip Diameter (A): 4.0 mm    Tip Length (E): 6.0 mm    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-040-100-100-10-G-C-N Plungers - M10x1 (10.0mm) x 20 mm x 0.4 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$71.59 AUD
$71.59 AUD
Each
M10.0x1.50 (10.0mm)
 20.0
mm 		0.5
N 		0.8
N 		5.0
mm 		6.0
mm 		1092898 | PLIT-050-100-150-10-G-C-N --- Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.5 N
Material: Steel    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-050-100-150-10-G-C-N Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$71.68 AUD
$71.68 AUD
Each
M10.0x1.50 (10.0mm)
 20.0
mm 		0.5
N 		0.8
N 		1092898 | PLIT-050-100-150-10-G-C-N --- Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 6.0 mm    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-050-100-150-10-G-C-N Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$71.68 AUD
$71.68 AUD
Each
M10x1 (10.0mm)
 20.0
mm 		0.5
N 		0.8
N 		5.0
mm 		6.0
mm 		1092902 | PLIT-050-100-100-10-G-C-N --- Plungers - M10x1 (10.0mm) x 20 mm x 0.5 N
Material: Steel    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-050-100-100-10-G-C-N Plungers - M10x1 (10.0mm) x 20 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$71.68 AUD
$71.68 AUD
Each
M10x1 (10.0mm)
 20.0
mm 		0.5
N 		0.8
N 		1092902 | PLIT-050-100-100-10-G-C-N --- Plungers - M10x1 (10.0mm) x 20 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 6.0 mm    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-050-100-100-10-G-C-N Plungers - M10x1 (10.0mm) x 20 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$71.68 AUD
$71.68 AUD
Each
M10.0x1.50 (10.0mm)
 20.0
mm 		0.6
N 		0.8
N 		6.0
mm 		6.0
mm 		1092908 | PLIT-060-100-150-10-G-C-N --- Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.6 N
Material: Steel    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-060-100-150-10-G-C-N Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$71.68 AUD
$71.68 AUD
Each
M10.0x1.50 (10.0mm)
 20.0
mm 		0.6
N 		0.8
N 		1092908 | PLIT-060-100-150-10-G-C-N --- Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.6 N
Material: Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 6.0 mm    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-060-100-150-10-G-C-N Plungers - M10.0x1.50 (10.0mm) x 20 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$71.68 AUD
$71.68 AUD
Each
M10x1 (10.0mm)
 20.0
mm 		0.6
N 		0.8
N 		6.0
mm 		6.0
mm 		1092909 | PLIT-060-100-100-10-G-C-N --- Plungers - M10x1 (10.0mm) x 20 mm x 0.6 N
Material: Steel    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-060-100-100-10-G-C-N Plungers - M10x1 (10.0mm) x 20 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$71.68 AUD
$71.68 AUD
Each
M10x1 (10.0mm)
 20.0
mm 		0.6
N 		0.8
N 		1092909 | PLIT-060-100-100-10-G-C-N --- Plungers - M10x1 (10.0mm) x 20 mm x 0.6 N
Material: Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 6.0 mm    H: 17.0    Handle Length (G): 25.0 mm   
Part Number: PLIT-060-100-100-10-G-C-N Plungers - M10x1 (10.0mm) x 20 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$71.68 AUD
$71.68 AUD
Each
M12.0x1.50 (12.0mm)
 25.0
mm 		0.5
N 		0.8
N 		5.0
mm 		8.0
mm 		1099661 | PLIT-050-120-150-12-G-C-N --- Plungers - M12.0x1.50 (12.0mm) x 25 mm x 0.5 N
Material: Steel    H: 19.0    Handle Length (G): 30.0 mm   
Part Number: PLIT-050-120-150-12-G-C-N Plungers - M12.0x1.50 (12.0mm) x 25 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$74.14 AUD
$74.14 AUD
Each
M12.0x1.50 (12.0mm)
 25.0
mm 		0.5
N 		0.8
N 		1099661 | PLIT-050-120-150-12-G-C-N --- Plungers - M12.0x1.50 (12.0mm) x 25 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 8.0 mm    H: 19.0    Handle Length (G): 30.0 mm   
Part Number: PLIT-050-120-150-12-G-C-N Plungers - M12.0x1.50 (12.0mm) x 25 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$74.14 AUD
$74.14 AUD
Each
M12.0x1.75 (12.0mm)
 25.0
mm 		0.5
N 		0.8
N 		5.0
mm 		8.0
mm 		1099663 | PLIT-050-120-175-12-G-C-N --- Plungers - M12.0x1.75 (12.0mm) x 25 mm x 0.5 N
Material: Steel    H: 19.0    Handle Length (G): 30.0 mm   
Part Number: PLIT-050-120-175-12-G-C-N Plungers - M12.0x1.75 (12.0mm) x 25 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$45.95 AUD
$45.95 AUD
Each
M12.0x1.75 (12.0mm)
 25.0
mm 		0.5
N 		0.8
N 		1099663 | PLIT-050-120-175-12-G-C-N --- Plungers - M12.0x1.75 (12.0mm) x 25 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 8.0 mm    H: 19.0    Handle Length (G): 30.0 mm   
Part Number: PLIT-050-120-175-12-G-C-N Plungers - M12.0x1.75 (12.0mm) x 25 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$45.95 AUD
$45.95 AUD
Each
M12.0x1.50 (12.0mm)
 25.0
mm 		0.6
N 		0.8
N 		6.0
mm 		8.0
mm 		1099668 | PLIT-060-120-150-12-G-C-N --- Plungers - M12.0x1.50 (12.0mm) x 25 mm x 0.6 N
Material: Steel    H: 19.0    Handle Length (G): 30.0 mm   
Part Number: PLIT-060-120-150-12-G-C-N Plungers - M12.0x1.50 (12.0mm) x 25 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$74.23 AUD
$74.23 AUD
Each
M12.0x1.50 (12.0mm)
 25.0
mm 		0.6
N 		0.8
N 		1099668 | PLIT-060-120-150-12-G-C-N --- Plungers - M12.0x1.50 (12.0mm) x 25 mm x 0.6 N
Material: Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 8.0 mm    H: 19.0    Handle Length (G): 30.0 mm   
Part Number: PLIT-060-120-150-12-G-C-N Plungers - M12.0x1.50 (12.0mm) x 25 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$74.23 AUD
$74.23 AUD
Each
M12.0x1.75 (12.0mm)
 25.0
mm 		0.6
N 		0.8
N 		6.0
mm 		8.0
mm 		1099672 | PLIT-060-120-175-12-G-C-N --- Plungers - M12.0x1.75 (12.0mm) x 25 mm x 0.6 N
Material: Steel    H: 19.0    Handle Length (G): 30.0 mm   
Part Number: PLIT-060-120-175-12-G-C-N Plungers - M12.0x1.75 (12.0mm) x 25 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$74.05 AUD
$74.05 AUD
Each
M12.0x1.75 (12.0mm)
 25.0
mm 		0.6
N 		0.8
N 		1099672 | PLIT-060-120-175-12-G-C-N --- Plungers - M12.0x1.75 (12.0mm) x 25 mm x 0.6 N
Material: Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 8.0 mm    H: 19.0    Handle Length (G): 30.0 mm   
Part Number: PLIT-060-120-175-12-G-C-N Plungers - M12.0x1.75 (12.0mm) x 25 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$74.05 AUD
$74.05 AUD
Each
M12.0x1.75 (12.0mm)
 25.0
mm 		0.8
N 		0.8
N 		8.0
mm 		8.0
mm 		Pistoncino di indicizzazione M12 x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel    H: 19.0    Handle Length (G): 30.0 mm   
Part Number: Pistoncino di indicizzazione M12 x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) Pistoncino di indicizzazione M12 x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$56.86 AUD
$56.86 AUD
Each
M12.0x1.75 (12.0mm)
 25.0
mm 		0.8
N 		0.8
N 		Pistoncino di indicizzazione M12 x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 8.0 mm    H: 19.0    Handle Length (G): 30.0 mm   
Part Number: Pistoncino di indicizzazione M12 x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) Pistoncino di indicizzazione M12 x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$56.86 AUD
$56.86 AUD
Each
M12.0x1.50 (12.0mm)
 32.0
mm 		0.8
N 		1.5
N 		8.0
mm 		10.0
mm 		Pistoncino di indicizzazione M12x1,5 fine x 32 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel    H: 24.0    Handle Length (G): 40.0 mm   
Part Number: Pistoncino di indicizzazione M12x1,5 fine x 32 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) Pistoncino di indicizzazione M12x1,5 fine x 32 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$74.23 AUD
$74.23 AUD
Each
M12.0x1.50 (12.0mm)
 32.0
mm 		0.8
N 		1.5
N 		Pistoncino di indicizzazione M12x1,5 fine x 32 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 10.0 mm    H: 24.0    Handle Length (G): 40.0 mm   
Part Number: Pistoncino di indicizzazione M12x1,5 fine x 32 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) Pistoncino di indicizzazione M12x1,5 fine x 32 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$74.23 AUD
$74.23 AUD
Each
1/2-13 UNC (12.700mm)
 25.0
mm 		0.5
N 		0.8
N 		5.0
mm 		8.0
mm 		1103545 | PLIT-050-127C-12-G-C-N --- Plungers - 1/2-13 UNC (12.700mm) x 25 mm x 0.5 N
Material: Steel    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: PLIT-050-127C-12-G-C-N Plungers - 1/2-13 UNC (12.700mm) x 25 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$74.50 AUD
$74.50 AUD
Each
1/2-13 UNC (12.700mm)
 25.0
mm 		0.5
N 		0.8
N 		1103545 | PLIT-050-127C-12-G-C-N --- Plungers - 1/2-13 UNC (12.700mm) x 25 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: PLIT-050-127C-12-G-C-N Plungers - 1/2-13 UNC (12.700mm) x 25 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$74.50 AUD
$74.50 AUD
Each
1/2-13 UNC (12.700mm)
 25.0
mm 		0.6
N 		0.8
N 		6.0
mm 		8.0
mm 		1103547 | PLIT-060-127C-12-G-C-N --- Plungers - 1/2-13 UNC (12.700mm) x 25 mm x 0.6 N
Material: Steel    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: PLIT-060-127C-12-G-C-N Plungers - 1/2-13 UNC (12.700mm) x 25 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$74.68 AUD
$74.68 AUD
Each
1/2-13 UNC (12.700mm)
 25.0
mm 		0.6
N 		0.8
N 		1103547 | PLIT-060-127C-12-G-C-N --- Plungers - 1/2-13 UNC (12.700mm) x 25 mm x 0.6 N
Material: Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: PLIT-060-127C-12-G-C-N Plungers - 1/2-13 UNC (12.700mm) x 25 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$74.68 AUD
$74.68 AUD
Each
1/2-13 UNC (12.700mm)
 25.0
mm 		0.8
N 		0.8
N 		8.0
mm 		8.0
mm 		Stantuffo di indicizzazione 1/2-13 UNC x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: Stantuffo di indicizzazione 1/2-13 UNC x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione 1/2-13 UNC x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$46.05 AUD
$46.05 AUD
Each
1/2-13 UNC (12.700mm)
 25.0
mm 		0.8
N 		0.8
N 		Stantuffo di indicizzazione 1/2-13 UNC x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: Stantuffo di indicizzazione 1/2-13 UNC x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione 1/2-13 UNC x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$46.05 AUD
$46.05 AUD
Each
1/2-20 UNF (12.700mm)
 25.0
mm 		0.5
N 		0.8
N 		5.0
mm 		8.0
mm 		1105381 | PLIT-050-127F-12-G-C-N --- Plungers - 1/2-20 UNF (12.700mm) x 25 mm x 0.5 N
Material: Steel    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: PLIT-050-127F-12-G-C-N Plungers - 1/2-20 UNF (12.700mm) x 25 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$74.68 AUD
$74.68 AUD
Each
1/2-20 UNF (12.700mm)
 25.0
mm 		0.5
N 		0.8
N 		1105381 | PLIT-050-127F-12-G-C-N --- Plungers - 1/2-20 UNF (12.700mm) x 25 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: PLIT-050-127F-12-G-C-N Plungers - 1/2-20 UNF (12.700mm) x 25 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$74.68 AUD
$74.68 AUD
Each
1/2-20 UNF (12.700mm)
 25.0
mm 		0.6
N 		0.8
N 		6.0
mm 		8.0
mm 		1105383 | PLIT-060-127F-12-G-C-N --- Plungers - 1/2-20 UNF (12.700mm) x 25 mm x 0.6 N
Material: Steel    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: PLIT-060-127F-12-G-C-N Plungers - 1/2-20 UNF (12.700mm) x 25 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$74.68 AUD
$74.68 AUD
Each
1/2-20 UNF (12.700mm)
 25.0
mm 		0.6
N 		0.8
N 		1105383 | PLIT-060-127F-12-G-C-N --- Plungers - 1/2-20 UNF (12.700mm) x 25 mm x 0.6 N
Material: Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: PLIT-060-127F-12-G-C-N Plungers - 1/2-20 UNF (12.700mm) x 25 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$74.68 AUD
$74.68 AUD
Each
1/2-20 UNF (12.700mm)
 25.0
mm 		0.8
N 		1.5
N 		8.0
mm 		8.0
mm 		Stantuffo di indicizzazione 1/2-20 UNF x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: Stantuffo di indicizzazione 1/2-20 UNF x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione 1/2-20 UNF x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$74.95 AUD
$74.95 AUD
Each
1/2-20 UNF (12.700mm)
 25.0
mm 		0.8
N 		1.5
N 		Stantuffo di indicizzazione 1/2-20 UNF x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
Part Number: Stantuffo di indicizzazione 1/2-20 UNF x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione 1/2-20 UNF x 25 x 8 mm - Impugnatura con dado in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$74.95 AUD
$74.95 AUD
Each