Inserts - Self Tapping - For Wood - Slotted Drive - Standard

5 Products in this selection
  • Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
  • Provides a strong wear and vibration resistant thread.
  • Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately)
  • Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation.
  • A 60o countersink is required for flush mounting.
  • Use with soft plastics, hard and soft wood, particle board
Internal Thread Softwood Hole Size Length (C) Outside Diameter (B) Indicative
Image
6-32 UNC (3.5mm)
 4.60
mm 		8.0
 6.502
 Inserto autofilettante 6-32 UNC x 8 mm - Legni duri e teneri, pannelli truciolari, plastica morbida - Per azionamento con scanalatura in legno - MBA (confezione da 5)
Material: Brass    Required Hole Depth: 10.008 mm    Hardwood and Plastic Hole Size: 4.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: Inserto autofilettante 6-32 UNC x 8 mm - Legni duri e teneri, pannelli truciolari, plastica morbida - Per azionamento con scanalatura in legno - MBA (confezione da 5) Inserto autofilettante 6-32 UNC x 8 mm - Legni duri e teneri, pannelli truciolari, plastica morbida - Per azionamento con scanalatura in legno - MBA (confezione da 5) / Inserts
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$11.95 AUD
$11.95 AUD
Per 5
Internal Thread Softwood Hole Size Length (C) Outside Diameter (B) Indicative
Image
6-32 UNC (3.5mm)
 4.60
mm 		8.0
 6.502
 Inserto autofilettante 6-32 UNC x 8 mm - Legni duri e teneri, pannelli truciolari, plastica morbida - Per azionamento con scanalatura in legno - MBA (confezione da 5)
Material: Brass    Required Hole Depth: 10.008 mm    Hardwood and Plastic Hole Size: 4.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: Inserto autofilettante 6-32 UNC x 8 mm - Legni duri e teneri, pannelli truciolari, plastica morbida - Per azionamento con scanalatura in legno - MBA (confezione da 5) Inserto autofilettante 6-32 UNC x 8 mm - Legni duri e teneri, pannelli truciolari, plastica morbida - Per azionamento con scanalatura in legno - MBA (confezione da 5) / Inserts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$11.95 AUD
$11.95 AUD
Per 5
8-32 UNC (4.166mm)
 5.11
mm 		10.0
 7.010
 Inserto autofilettante 8-32 UNC x 10 mm - Per azionamento con scanalatura in legno - MBA (confezione da 5)
Material: Brass    Required Hole Depth: 13.005 mm    Hardwood and Plastic Hole Size: 5.21 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: Inserto autofilettante 8-32 UNC x 10 mm - Per azionamento con scanalatura in legno - MBA (confezione da 5) Inserto autofilettante 8-32 UNC x 10 mm - Per azionamento con scanalatura in legno - MBA (confezione da 5) / Inserts
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$11.41 AUD
$11.41 AUD
Per 5
8-32 UNC (4.166mm)
 5.11
mm 		10.0
 7.010
 Inserto autofilettante 8-32 UNC x 10 mm - Per azionamento con scanalatura in legno - MBA (confezione da 5)
Material: Brass    Required Hole Depth: 13.005 mm    Hardwood and Plastic Hole Size: 5.21 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: Inserto autofilettante 8-32 UNC x 10 mm - Per azionamento con scanalatura in legno - MBA (confezione da 5) Inserto autofilettante 8-32 UNC x 10 mm - Per azionamento con scanalatura in legno - MBA (confezione da 5) / Inserts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$11.41 AUD
$11.41 AUD
Per 5
1/4-20 UNC (6.35mm)
 7.62
mm 		14.0
 10.008
 1072318 | IN-TP-0635C-140-WS (2 Pcs) --- Inserts - 1/4-20 UNC (6.35mm) x 7.62 mm x 14
Material: Brass    Required Hole Depth: 16.993 mm    Hardwood and Plastic Hole Size: 7.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-0635C-140-WS (2 Pcs) Inserts - 1/4-20 UNC (6.35mm) x 7.62 mm x 14
4 units (8 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$3.59 AUD
$3.59 AUD
Per 2
1/4-20 UNC (6.35mm)
 7.62
mm 		14.0
 10.008
 1072318 | IN-TP-0635C-140-WS (2 Pcs) --- Inserts - 1/4-20 UNC (6.35mm) x 7.62 mm x 14
Material: Brass    Required Hole Depth: 16.993 mm    Hardwood and Plastic Hole Size: 7.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-0635C-140-WS (2 Pcs) Inserts - 1/4-20 UNC (6.35mm) x 7.62 mm x 14
4 units (8 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$3.59 AUD
$3.59 AUD
Per 2
3/8-16 UNC (9.525mm)
 12.40
mm 		23.0
 16.002
 1087132 | IN-TP-0953C-230-WS --- Inserts - 3/8-16 UNC (9.525mm) x 12.4 mm x 23
Material: Brass    Required Hole Depth: 26.010 mm    Hardwood and Plastic Hole Size: 12.60 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-0953C-230-WS Inserts - 3/8-16 UNC (9.525mm) x 12.4 mm x 23
5 Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$8.41 AUD
$8.41 AUD
Each
3/8-16 UNC (9.525mm)
 12.40
mm 		23.0
 16.002
 1087132 | IN-TP-0953C-230-WS --- Inserts - 3/8-16 UNC (9.525mm) x 12.4 mm x 23
Material: Brass    Required Hole Depth: 26.010 mm    Hardwood and Plastic Hole Size: 12.60 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-0953C-230-WS Inserts - 3/8-16 UNC (9.525mm) x 12.4 mm x 23
5 Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$8.41 AUD
$8.41 AUD
Each
M6x1
 8.0
mm 		12.7
 11.5
 1227578 | 400-M6-CR --- Bearings - M6x1 x 8 mm x 12.7
Material: Stainless Steel    Required Hole Depth: 14.9 mm    Hardwood and Plastic Hole Size: 9.92 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: 400-M6-CR Bearings - M6x1 x 8 mm x 12.7 / Inserts
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$21.77 AUD
$21.77 AUD
Each
M6x1
 8.0
mm 		12.7
 11.5
 1227578 | 400-M6-CR --- Bearings - M6x1 x 8 mm x 12.7
Material: Stainless Steel    Required Hole Depth: 14.9 mm    Hardwood and Plastic Hole Size: 9.92 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: 400-M6-CR Bearings - M6x1 x 8 mm x 12.7 / Inserts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$21.77 AUD
$21.77 AUD
Each