Inserts - Self Tapping - For Aluminium - Stainless 303

6 Products in this selection
  • Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.
  • Provides a strong wear and vibration resistant thread.
  • Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately)
  • Hole sizes are reference only. Can vary on batches. Optimum hole size is to be determinded through experimentation.
  • A 60o countersink is required for flush mounting.
  • Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.
Internal Thread Required Hole Size Length (C) Outside Diameter (B) Indicative
Image
6-32 UNC (3.5mm)
 5.486
mm 		5.0
 5.994
 1051461 | IN-TP-0350C-050-A-S3 --- Inserts - 6-32 UNC (3.5mm) x 5.486 mm x 5
Material: 303 Stainless Steel    Required Hole Depth: 7.010 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: IN-TP-0350C-050-A-S3 Inserts - 6-32 UNC (3.5mm) x 5.486 mm x 5
2 Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$9.86 AUD
$9.86 AUD
Each
Internal Thread Required Hole Size Length (C) Outside Diameter (B) Indicative
Image
6-32 UNC (3.5mm)
 5.486
mm 		5.0
 5.994
 1051461 | IN-TP-0350C-050-A-S3 --- Inserts - 6-32 UNC (3.5mm) x 5.486 mm x 5
Material: 303 Stainless Steel    Required Hole Depth: 7.010 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: IN-TP-0350C-050-A-S3 Inserts - 6-32 UNC (3.5mm) x 5.486 mm x 5
2 Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$9.86 AUD
$9.86 AUD
Each
8-32 UNC (4.166mm)
 5.994
mm 		6.0
 6.502
 Inserto autofilettante 8-32 UNC x 6 mm - Per alluminio inossidabile 303 - MBA (confezione da 1)
Material: 303 Stainless Steel    Required Hole Depth: 8.001 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: Inserto autofilettante 8-32 UNC x 6 mm - Per alluminio inossidabile 303 - MBA (confezione da 1) Inserto autofilettante 8-32 UNC x 6 mm - Per alluminio inossidabile 303 - MBA (confezione da 1) / Inserts
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$5.41 AUD
$5.41 AUD
Each
8-32 UNC (4.166mm)
 5.994
mm 		6.0
 6.502
 Inserto autofilettante 8-32 UNC x 6 mm - Per alluminio inossidabile 303 - MBA (confezione da 1)
Material: 303 Stainless Steel    Required Hole Depth: 8.001 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: Inserto autofilettante 8-32 UNC x 6 mm - Per alluminio inossidabile 303 - MBA (confezione da 1) Inserto autofilettante 8-32 UNC x 6 mm - Per alluminio inossidabile 303 - MBA (confezione da 1) / Inserts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$5.41 AUD
$5.41 AUD
Each
8-32 UNC (4.166mm)
 5.994
mm 		8.0
 6.502
 1056576 | IN-TP-0417C-080-A-S3 --- Inserts - 8-32 UNC (4.166mm) x 5.994 mm x 8
Material: 303 Stainless Steel    Required Hole Depth: 10.008 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: IN-TP-0417C-080-A-S3 Inserts - 8-32 UNC (4.166mm) x 5.994 mm x 8
2 Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$4.86 AUD
$4.86 AUD
Each
8-32 UNC (4.166mm)
 5.994
mm 		8.0
 6.502
 1056576 | IN-TP-0417C-080-A-S3 --- Inserts - 8-32 UNC (4.166mm) x 5.994 mm x 8
Material: 303 Stainless Steel    Required Hole Depth: 10.008 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: IN-TP-0417C-080-A-S3 Inserts - 8-32 UNC (4.166mm) x 5.994 mm x 8
2 Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$4.86 AUD
$4.86 AUD
Each
1/4-20 UNC (6.35mm)
 9.296
mm 		8.0
 10.008
 1072499 | IN-TP-0635C-080-A-S3 --- Inserts - 1/4-20 UNC (6.35mm) x 9.296 mm x 8
Material: 303 Stainless Steel    Required Hole Depth: 10.008 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: IN-TP-0635C-080-A-S3 Inserts - 1/4-20 UNC (6.35mm) x 9.296 mm x 8
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$8.05 AUD
$8.05 AUD
Each
1/4-20 UNC (6.35mm)
 9.296
mm 		8.0
 10.008
 1072499 | IN-TP-0635C-080-A-S3 --- Inserts - 1/4-20 UNC (6.35mm) x 9.296 mm x 8
Material: 303 Stainless Steel    Required Hole Depth: 10.008 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: IN-TP-0635C-080-A-S3 Inserts - 1/4-20 UNC (6.35mm) x 9.296 mm x 8
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$8.05 AUD
$8.05 AUD
Each
5/16-18 UNC (7.938mm)
 11.100
mm 		13.7
 12.014
 1078179 | IN-TP-0794C-137-A-S3 --- Inserts - 5/16-18 UNC (7.938mm) x 11.1 mm x 13.7
Material: 303 Stainless Steel    Required Hole Depth: 10.998 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: IN-TP-0794C-137-A-S3 Inserts - 5/16-18 UNC (7.938mm) x 11.1 mm x 13.7
10 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.76 AUD
$11.65 AUD $7.76 AUD
Each
5/16-18 UNC (7.938mm)
 11.100
mm 		13.7
 12.014
 1078179 | IN-TP-0794C-137-A-S3 --- Inserts - 5/16-18 UNC (7.938mm) x 11.1 mm x 13.7
Material: 303 Stainless Steel    Required Hole Depth: 10.998 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: IN-TP-0794C-137-A-S3 Inserts - 5/16-18 UNC (7.938mm) x 11.1 mm x 13.7
10 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$7.76 AUD
$11.65 AUD $7.76 AUD
Each
5/16-18 UNC (7.938mm)
 11.100
mm 		14.0
 12.014
 1078181 | IN-TP-0794C-140-A-S3 --- Inserts - 5/16-18 UNC (7.938mm) x 11.1 mm x 14
Material: 303 Stainless Steel    Required Hole Depth: 16.993 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: IN-TP-0794C-140-A-S3 Inserts - 5/16-18 UNC (7.938mm) x 11.1 mm x 14
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$7.23 AUD
$7.23 AUD
Each
5/16-18 UNC (7.938mm)
 11.100
mm 		14.0
 12.014
 1078181 | IN-TP-0794C-140-A-S3 --- Inserts - 5/16-18 UNC (7.938mm) x 11.1 mm x 14
Material: 303 Stainless Steel    Required Hole Depth: 16.993 mm    Material to be used in: Aluminium, Aluminium Alloy, Magnesium and Mild Steel   
Part Number: IN-TP-0794C-140-A-S3 Inserts - 5/16-18 UNC (7.938mm) x 11.1 mm x 14
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$7.23 AUD
$7.23 AUD
Each