Inserts - Expansion - Press In - Brass - Standard

97 Products in this selection
  • Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.
  • Material : Brass.
  • Easiest inserts to install - simply push into a pre-moulded hole.
  • Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert.
  • The insertion of the screw locks the external knurls into the wall of the hole.
  • Provides excellent thread durability. Not as strong as wind-in inserts.
Internal Thread Pilot Diameter (A) Length (L) Recommended Hole Diameter (A) Knurled OD (B) Indicative
Image
3/8-16 UNC (9.525mm)
 11.1
mm
+0.000/- 0.254 		15.875
mm
+/- 0.25 		11.11
mm 		11.46
mm
+/- 0.102 		1086984 | IN-EP-0953C-159-B (2 Pcs) --- Inserts - 3/8-16 UNC (9.525mm) x 11.1 mm x 15.875 mm
Material: Brass   
Part Number: IN-EP-0953C-159-B (2 Pcs) Inserts - 3/8-16 UNC (9.525mm) x 11.1 mm x 15.875 mm
3 units (6 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$6.41 AUD
$6.41 AUD
Per 2
Internal Thread Pilot Diameter (A) Length (L) Recommended Hole Diameter (A) Indicative
Image
3/8-16 UNC (9.525mm)
 11.1
mm
+0.000/- 0.254 		15.875
mm
+/- 0.25 		11.11
mm 		1086984 | IN-EP-0953C-159-B (2 Pcs) --- Inserts - 3/8-16 UNC (9.525mm) x 11.1 mm x 15.875 mm
Material: Brass    Knurled OD (B): 11.46 mm +/- 0.102   
Part Number: IN-EP-0953C-159-B (2 Pcs) Inserts - 3/8-16 UNC (9.525mm) x 11.1 mm x 15.875 mm
3 units (6 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$6.41 AUD
$6.41 AUD
Per 2