Gears - Spur - Module 0.4 - Plastic with Insert

17 Products in this selection
  • PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Acetal
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
Additional resources:
Module 0.4 Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
36
Nr. 		14.40
mm 		5.000
mm 		15.200
mm 		3.000
mm 		Module 0.4
 1149303 | G014B-36-M04-030-050-AB-G --- Gears - 36 Teeth x 14.4 mm x 5 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G014B-36-M04-030-050-AB-G Gears - 36 Teeth x 14.4 mm x 5 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$2.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
36
Nr. 		14.40
mm 		5.000
mm 		15.200
mm 		1149303 | G014B-36-M04-030-050-AB-G --- Gears - 36 Teeth x 14.4 mm x 5 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G014B-36-M04-030-050-AB-G Gears - 36 Teeth x 14.4 mm x 5 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$2.00 AUD
$2.00 AUD
Each
40
Nr. 		16.00
mm 		3.000
mm 		16.800
mm 		3.000
mm 		Module 0.4
 1153160 | G016B-40-M04-030-030-AB-G --- Gears - 40 Teeth x 16 mm x 3 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G016B-40-M04-030-030-AB-G Gears - 40 Teeth x 16 mm x 3 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$2.00 AUD
Each
40
Nr. 		16.00
mm 		3.000
mm 		16.800
mm 		1153160 | G016B-40-M04-030-030-AB-G --- Gears - 40 Teeth x 16 mm x 3 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G016B-40-M04-030-030-AB-G Gears - 40 Teeth x 16 mm x 3 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$2.00 AUD
$2.00 AUD
Each
50
Nr. 		20.00
mm 		4.000
mm 		20.800
mm 		3.000
mm 		Module 0.4
 1161582 | G020B-50-M04-030-040-AB-G (2 Pcs) --- Gears - 50 Teeth x 20 mm x 4 mm
Material: cetal with Brass Insert    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: cetal with Brass Insert   
Part Number: G020B-50-M04-030-040-AB-G (2 Pcs) Gears - 50 Teeth x 20 mm x 4 mm
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.00 AUD
$4.00 AUD
Per 2
50
Nr. 		20.00
mm 		4.000
mm 		20.800
mm 		1161582 | G020B-50-M04-030-040-AB-G (2 Pcs) --- Gears - 50 Teeth x 20 mm x 4 mm
Material: cetal with Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: cetal with Brass Insert   
Part Number: G020B-50-M04-030-040-AB-G (2 Pcs) Gears - 50 Teeth x 20 mm x 4 mm
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$4.00 AUD
$4.00 AUD
Per 2
50
Nr. 		20.00
mm 		6.000
mm 		20.800
mm 		3.000
mm 		Module 0.4
 1161588 | G020B-50-M04-030-060-AB-G --- Gears - 50 Teeth x 20 mm x 6 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G020B-50-M04-030-060-AB-G Gears - 50 Teeth x 20 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$10.00 AUD
Each
50
Nr. 		20.00
mm 		6.000
mm 		20.800
mm 		1161588 | G020B-50-M04-030-060-AB-G --- Gears - 50 Teeth x 20 mm x 6 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G020B-50-M04-030-060-AB-G Gears - 50 Teeth x 20 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$10.00 AUD
Each
60
Nr. 		24.00
mm 		3.000
mm 		24.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$14.00 AUD
$14.00 AUD
Each
60
Nr. 		24.00
mm 		3.000
mm 		24.800
mm 		Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$14.00 AUD
$14.00 AUD
Each
70
Nr. 		28.00
mm 		3.000
mm 		28.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$10.00 AUD
Each
70
Nr. 		28.00
mm 		3.000
mm 		28.800
mm 		Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$10.00 AUD
Each
70
Nr. 		28.00
mm 		4.000
mm 		28.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$10.00 AUD
Each
70
Nr. 		28.00
mm 		4.000
mm 		28.800
mm 		Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$10.00 AUD
Each
70
Nr. 		28.00
mm 		6.000
mm 		28.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2) Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2) / Gears
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 2
70
Nr. 		28.00
mm 		6.000
mm 		28.800
mm 		Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2) Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2) / Gears
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 2
80
Nr. 		32.00
mm 		4.000
mm 		32.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$10.00 AUD
Each
80
Nr. 		32.00
mm 		4.000
mm 		32.800
mm 		Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$10.00 AUD
Each
85
Nr. 		34.00
mm 		4.000
mm 		34.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$10.00 AUD
Each
85
Nr. 		34.00
mm 		4.000
mm 		34.800
mm 		Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$10.00 AUD
Each
90
Nr. 		36.00
mm 		4.000
mm 		36.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1) Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$5.00 AUD
Each
90
Nr. 		36.00
mm 		4.000
mm 		36.800
mm 		Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1) Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.00 AUD
$5.00 AUD
Each
95
Nr. 		38.00
mm 		4.000
mm 		38.800
mm 		3.000
mm 		Module 0.4
 1185403 | G038B-95-M04-030-040-AB-G --- Gears - 95 Teeth x 38 mm x 4 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G038B-95-M04-030-040-AB-G Gears - 95 Teeth x 38 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$12.00 AUD
Each
95
Nr. 		38.00
mm 		4.000
mm 		38.800
mm 		1185403 | G038B-95-M04-030-040-AB-G --- Gears - 95 Teeth x 38 mm x 4 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G038B-95-M04-030-040-AB-G Gears - 95 Teeth x 38 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$12.00 AUD
$12.00 AUD
Each
100
Nr. 		40.00
mm 		4.000
mm 		40.800
mm 		3.000
mm 		Module 0.4
 1187420 | G040B-100-M04-030-040-AB-G --- Gears - 100 Teeth x 40 mm x 4 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G040B-100-M04-030-040-AB-G Gears - 100 Teeth x 40 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$12.00 AUD
Each
100
Nr. 		40.00
mm 		4.000
mm 		40.800
mm 		1187420 | G040B-100-M04-030-040-AB-G --- Gears - 100 Teeth x 40 mm x 4 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G040B-100-M04-030-040-AB-G Gears - 100 Teeth x 40 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$12.00 AUD
$12.00 AUD
Each
100
Nr. 		40.00
mm 		6.000
mm 		40.800
mm 		3.000
mm 		Module 0.4
 1187424 | G040B-100-M04-030-060-AB-G --- Gears - 100 Teeth x 40 mm x 6 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G040B-100-M04-030-060-AB-G Gears - 100 Teeth x 40 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$12.00 AUD
Each
100
Nr. 		40.00
mm 		6.000
mm 		40.800
mm 		1187424 | G040B-100-M04-030-060-AB-G --- Gears - 100 Teeth x 40 mm x 6 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G040B-100-M04-030-060-AB-G Gears - 100 Teeth x 40 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$12.00 AUD
$12.00 AUD
Each
112
Nr. 		44.80
mm 		5.000
mm 		45.600
mm 		3.000
mm 		Module 0.4
 1191685 | G045B-112-M04-030-050-AB-G (3 Pcs) --- Gears - 112 Teeth x 44.8 mm x 5 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G045B-112-M04-030-050-AB-G (3 Pcs) Gears - 112 Teeth x 44.8 mm x 5 mm
1 pack (3 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 3
112
Nr. 		44.80
mm 		5.000
mm 		45.600
mm 		1191685 | G045B-112-M04-030-050-AB-G (3 Pcs) --- Gears - 112 Teeth x 44.8 mm x 5 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G045B-112-M04-030-050-AB-G (3 Pcs) Gears - 112 Teeth x 44.8 mm x 5 mm
1 pack (3 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 3
112
Nr. 		44.80
mm 		6.000
mm 		45.600
mm 		3.000
mm 		Module 0.4
 1191686 | G045B-112-M04-030-060-AB-G --- Gears - 112 Teeth x 44.8 mm x 6 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G045B-112-M04-030-060-AB-G Gears - 112 Teeth x 44.8 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$5.00 AUD
Each
112
Nr. 		44.80
mm 		6.000
mm 		45.600
mm 		1191686 | G045B-112-M04-030-060-AB-G --- Gears - 112 Teeth x 44.8 mm x 6 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G045B-112-M04-030-060-AB-G Gears - 112 Teeth x 44.8 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.00 AUD
$5.00 AUD
Each
168
Nr. 		67.20
mm 		6.000
mm 		68.000
mm 		3.000
mm 		Module 0.4
 1203638 | G067B-168-M04-030-060-AB-G --- Gears - 168 Teeth x 67.2 mm x 6 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G067B-168-M04-030-060-AB-G Gears - 168 Teeth x 67.2 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$15.00 AUD
$15.00 AUD
Each
168
Nr. 		67.20
mm 		6.000
mm 		68.000
mm 		1203638 | G067B-168-M04-030-060-AB-G --- Gears - 168 Teeth x 67.2 mm x 6 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 9 / Machined   
Part Number: G067B-168-M04-030-060-AB-G Gears - 168 Teeth x 67.2 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$15.00 AUD
$15.00 AUD
Each