Gears - Spur - 32DP - 14.5 Degree - Plastic

3 Products in this selection
  • PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
  • 32 Diametrical Pitch. Approx 2.49mm between teeth.
Additional resources:
32DP Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
12
Nr. 		9.53
mm 		3.175
mm 		11.125
mm 		4.76
mm 		32DP
 1098089 | G010B-12-V32-048-032-N-N --- Gears - 12 Teeth x 9.53 mm x 3.175 mm
Material: Nylon    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 14.5 Deg.    Quality: Commercial - Moulded   
Part Number: G010B-12-V32-048-032-N-N Gears - 12 Teeth x 9.53 mm x 3.175 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$2.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
12
Nr. 		9.53
mm 		3.175
mm 		11.125
mm 		1098089 | G010B-12-V32-048-032-N-N --- Gears - 12 Teeth x 9.53 mm x 3.175 mm
Material: Nylon    Face Width (FW): 4.76 mm    Pitch: 32DP    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 14.5 Deg.    Quality: Commercial - Moulded   
Part Number: G010B-12-V32-048-032-N-N Gears - 12 Teeth x 9.53 mm x 3.175 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$2.00 AUD
$2.00 AUD
Each
24
Nr. 		19.05
mm 		4.762
mm 		20.650
mm 		4.76
mm 		32DP
 1130989 | G019B-24-V32-048-048-N-N --- Gears - 24 Teeth x 19.05 mm x 4.762 mm
Material: Nylon    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 14.5 Deg.    Quality: Commercial - Moulded   
Part Number: G019B-24-V32-048-048-N-N Gears - 24 Teeth x 19.05 mm x 4.762 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$2.00 AUD
Each
24
Nr. 		19.05
mm 		4.762
mm 		20.650
mm 		1130989 | G019B-24-V32-048-048-N-N --- Gears - 24 Teeth x 19.05 mm x 4.762 mm
Material: Nylon    Face Width (FW): 4.76 mm    Pitch: 32DP    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 14.5 Deg.    Quality: Commercial - Moulded   
Part Number: G019B-24-V32-048-048-N-N Gears - 24 Teeth x 19.05 mm x 4.762 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$2.00 AUD
$2.00 AUD
Each
48
Nr. 		38.10
mm 		6.350
mm 		39.700
mm 		4.76
mm 		32DP
 1160249 | G038B-48-V32-048-064-N-N --- Gears - 48 Teeth x 38.1 mm x 6.35 mm
Material: Nylon    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 14.5 Deg.    Quality: Commercial - Moulded   
Part Number: G038B-48-V32-048-064-N-N Gears - 48 Teeth x 38.1 mm x 6.35 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$5.00 AUD
Each
48
Nr. 		38.10
mm 		6.350
mm 		39.700
mm 		1160249 | G038B-48-V32-048-064-N-N --- Gears - 48 Teeth x 38.1 mm x 6.35 mm
Material: Nylon    Face Width (FW): 4.76 mm    Pitch: 32DP    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 14.5 Deg.    Quality: Commercial - Moulded   
Part Number: G038B-48-V32-048-064-N-N Gears - 48 Teeth x 38.1 mm x 6.35 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.00 AUD
$5.00 AUD
Each