Pins - Taper Metric

317 Products in this selection
This is a combined category of Taper Metric Pins.
Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Pins - Taper Metric
Additional resources:
Taper Pins catalogue PDF
Master Pins Catalogue PDF
Inch Sized Taper Pins
Nom. Small End Diameter (D) Length (L) Nom. Large End Diameter (D2) Indicative
Image
2.00
mm 		28.00
mm 		2.56
mm 		1041731 | TPM-0200-02800-4 --- Taper Metric Pins - 2 mm x 28 mm x 2.56 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0200-02800-4 Taper Metric Pins - 2 mm x 28 mm x 2.56 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Nom. Small End Diameter (D) Length (L) Nom. Large End Diameter (D2) Indicative
Image
2.00
mm 		28.00
mm 		2.56
mm 		1041731 | TPM-0200-02800-4 --- Taper Metric Pins - 2 mm x 28 mm x 2.56 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0200-02800-4 Taper Metric Pins - 2 mm x 28 mm x 2.56 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.00
mm 		28.00
mm 		2.56
mm 		1041732 | TPM-0200-02800-M --- Taper Metric Pins - 2 mm x 28 mm x 2.56 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0200-02800-M Taper Metric Pins - 2 mm x 28 mm x 2.56 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.00
mm 		28.00
mm 		2.56
mm 		1041732 | TPM-0200-02800-M --- Taper Metric Pins - 2 mm x 28 mm x 2.56 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0200-02800-M Taper Metric Pins - 2 mm x 28 mm x 2.56 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.00
mm 		30.00
mm 		2.60
mm 		1041748 | TPM-0200-03000-4 --- Taper Metric Pins - 2 mm x 30 mm x 2.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0200-03000-4 Taper Metric Pins - 2 mm x 30 mm x 2.6 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.00
mm 		30.00
mm 		2.60
mm 		1041748 | TPM-0200-03000-4 --- Taper Metric Pins - 2 mm x 30 mm x 2.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0200-03000-4 Taper Metric Pins - 2 mm x 30 mm x 2.6 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.00
mm 		30.00
mm 		2.60
mm 		1041748 | TPM-0200-03000-M (50 Pcs) --- Taper Metric Pins - 2 mm x 30 mm x 2.6 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0200-03000-M (50 Pcs) Taper Metric Pins - 2 mm x 30 mm x 2.6 mm
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$63.77 AUD
$63.77 AUD
Per 50
2.00
mm 		30.00
mm 		2.60
mm 		1041748 | TPM-0200-03000-M (50 Pcs) --- Taper Metric Pins - 2 mm x 30 mm x 2.6 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0200-03000-M (50 Pcs) Taper Metric Pins - 2 mm x 30 mm x 2.6 mm
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$63.77 AUD
$63.77 AUD
Per 50
View the product page first if you are unsure.
2.00
mm 		40.00
mm 		2.80
mm 		1041826 | TPM-0200-04000-4 --- Taper Metric Pins - 2 mm x 40 mm x 2.8 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0200-04000-4 Taper Metric Pins - 2 mm x 40 mm x 2.8 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.00
mm 		40.00
mm 		2.80
mm 		1041826 | TPM-0200-04000-4 --- Taper Metric Pins - 2 mm x 40 mm x 2.8 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0200-04000-4 Taper Metric Pins - 2 mm x 40 mm x 2.8 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.00
mm 		50.00
mm 		3.00
mm 		1041842 | TPM-0200-05000-4 --- Taper Metric Pins - 2 mm x 50 mm x 3 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0200-05000-4 Taper Metric Pins - 2 mm x 50 mm x 3 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.00
mm 		50.00
mm 		3.00
mm 		1041842 | TPM-0200-05000-4 --- Taper Metric Pins - 2 mm x 50 mm x 3 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0200-05000-4 Taper Metric Pins - 2 mm x 50 mm x 3 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		6.00
mm 		2.62
mm 		1043603 | TPM-0250-00600-M --- Taper Metric Pins - 2.5 mm x 6 mm x 2.62 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-00600-M Taper Metric Pins - 2.5 mm x 6 mm x 2.62 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		6.00
mm 		2.62
mm 		1043603 | TPM-0250-00600-M --- Taper Metric Pins - 2.5 mm x 6 mm x 2.62 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-00600-M Taper Metric Pins - 2.5 mm x 6 mm x 2.62 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		8.00
mm 		2.66
mm 		1043730 | TPM-0250-00800-M --- Taper Metric Pins - 2.5 mm x 8 mm x 2.66 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-00800-M Taper Metric Pins - 2.5 mm x 8 mm x 2.66 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		8.00
mm 		2.66
mm 		1043730 | TPM-0250-00800-M --- Taper Metric Pins - 2.5 mm x 8 mm x 2.66 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-00800-M Taper Metric Pins - 2.5 mm x 8 mm x 2.66 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		10.00
mm 		2.70
mm 		1043831 | TPM-0250-01000-M --- Taper Metric Pins - 2.5 mm x 10 mm x 2.7 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-01000-M Taper Metric Pins - 2.5 mm x 10 mm x 2.7 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		10.00
mm 		2.70
mm 		1043831 | TPM-0250-01000-M --- Taper Metric Pins - 2.5 mm x 10 mm x 2.7 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-01000-M Taper Metric Pins - 2.5 mm x 10 mm x 2.7 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		12.00
mm 		2.74
mm 		1043896 | TPM-0250-01200-M --- Taper Metric Pins - 2.5 mm x 12 mm x 2.74 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-01200-M Taper Metric Pins - 2.5 mm x 12 mm x 2.74 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		12.00
mm 		2.74
mm 		1043896 | TPM-0250-01200-M --- Taper Metric Pins - 2.5 mm x 12 mm x 2.74 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-01200-M Taper Metric Pins - 2.5 mm x 12 mm x 2.74 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		14.00
mm 		2.78
mm 		1043950 | TPM-0250-01400-M --- Taper Metric Pins - 2.5 mm x 14 mm x 2.78 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-01400-M Taper Metric Pins - 2.5 mm x 14 mm x 2.78 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		14.00
mm 		2.78
mm 		1043950 | TPM-0250-01400-M --- Taper Metric Pins - 2.5 mm x 14 mm x 2.78 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-01400-M Taper Metric Pins - 2.5 mm x 14 mm x 2.78 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		16.00
mm 		2.82
mm 		1043982 | TPM-0250-01600-4 --- Taper Metric Pins - 2.5 mm x 16 mm x 2.82 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0250-01600-4 Taper Metric Pins - 2.5 mm x 16 mm x 2.82 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		16.00
mm 		2.82
mm 		1043982 | TPM-0250-01600-4 --- Taper Metric Pins - 2.5 mm x 16 mm x 2.82 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0250-01600-4 Taper Metric Pins - 2.5 mm x 16 mm x 2.82 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		16.00
mm 		2.82
mm 		1043983 | TPM-0250-01600-M --- Taper Metric Pins - 2.5 mm x 16 mm x 2.82 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-01600-M Taper Metric Pins - 2.5 mm x 16 mm x 2.82 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		16.00
mm 		2.82
mm 		1043983 | TPM-0250-01600-M --- Taper Metric Pins - 2.5 mm x 16 mm x 2.82 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-01600-M Taper Metric Pins - 2.5 mm x 16 mm x 2.82 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		18.00
mm 		2.86
mm 		1044052 | TPM-0250-01800-M --- Taper Metric Pins - 2.5 mm x 18 mm x 2.86 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-01800-M Taper Metric Pins - 2.5 mm x 18 mm x 2.86 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		18.00
mm 		2.86
mm 		1044052 | TPM-0250-01800-M --- Taper Metric Pins - 2.5 mm x 18 mm x 2.86 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-01800-M Taper Metric Pins - 2.5 mm x 18 mm x 2.86 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		18.00
mm 		2.86
mm 		1044053 | TPM-0250-01800-4 --- Taper Metric Pins - 2.5 mm x 18 mm x 2.86 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0250-01800-4 Taper Metric Pins - 2.5 mm x 18 mm x 2.86 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		18.00
mm 		2.86
mm 		1044053 | TPM-0250-01800-4 --- Taper Metric Pins - 2.5 mm x 18 mm x 2.86 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0250-01800-4 Taper Metric Pins - 2.5 mm x 18 mm x 2.86 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		20.00
mm 		2.90
mm 		1044079 | TPM-0250-02000-4 --- Taper Metric Pins - 2.5 mm x 20 mm x 2.9 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0250-02000-4 Taper Metric Pins - 2.5 mm x 20 mm x 2.9 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		20.00
mm 		2.90
mm 		1044079 | TPM-0250-02000-4 --- Taper Metric Pins - 2.5 mm x 20 mm x 2.9 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0250-02000-4 Taper Metric Pins - 2.5 mm x 20 mm x 2.9 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		20.00
mm 		2.90
mm 		1044080 | TPM-0250-02000-M --- Taper Metric Pins - 2.5 mm x 20 mm x 2.9 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-02000-M Taper Metric Pins - 2.5 mm x 20 mm x 2.9 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		20.00
mm 		2.90
mm 		1044080 | TPM-0250-02000-M --- Taper Metric Pins - 2.5 mm x 20 mm x 2.9 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-02000-M Taper Metric Pins - 2.5 mm x 20 mm x 2.9 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		22.00
mm 		2.94
mm 		1044122 | TPM-0250-02200-M --- Taper Metric Pins - 2.5 mm x 22 mm x 2.94 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-02200-M Taper Metric Pins - 2.5 mm x 22 mm x 2.94 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		22.00
mm 		2.94
mm 		1044122 | TPM-0250-02200-M --- Taper Metric Pins - 2.5 mm x 22 mm x 2.94 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-02200-M Taper Metric Pins - 2.5 mm x 22 mm x 2.94 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		24.00
mm 		2.98
mm 		1044130 | TPM-0250-02400-4 --- Taper Metric Pins - 2.5 mm x 24 mm x 2.98 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0250-02400-4 Taper Metric Pins - 2.5 mm x 24 mm x 2.98 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		24.00
mm 		2.98
mm 		1044130 | TPM-0250-02400-4 --- Taper Metric Pins - 2.5 mm x 24 mm x 2.98 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0250-02400-4 Taper Metric Pins - 2.5 mm x 24 mm x 2.98 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		24.00
mm 		2.98
mm 		1044131 | TPM-0250-02400-M --- Taper Metric Pins - 2.5 mm x 24 mm x 2.98 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-02400-M Taper Metric Pins - 2.5 mm x 24 mm x 2.98 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		24.00
mm 		2.98
mm 		1044131 | TPM-0250-02400-M --- Taper Metric Pins - 2.5 mm x 24 mm x 2.98 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-02400-M Taper Metric Pins - 2.5 mm x 24 mm x 2.98 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		26.00
mm 		3.02
mm 		1044173 | TPM-0250-02600-4 --- Taper Metric Pins - 2.5 mm x 26 mm x 3.02 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0250-02600-4 Taper Metric Pins - 2.5 mm x 26 mm x 3.02 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		26.00
mm 		3.02
mm 		1044173 | TPM-0250-02600-4 --- Taper Metric Pins - 2.5 mm x 26 mm x 3.02 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Taper Metric - Stainless Steel
Part Number: TPM-0250-02600-4 Taper Metric Pins - 2.5 mm x 26 mm x 3.02 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		26.00
mm 		3.02
mm 		1044174 | TPM-0250-02600-M --- Taper Metric Pins - 2.5 mm x 26 mm x 3.02 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-02600-M Taper Metric Pins - 2.5 mm x 26 mm x 3.02 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		26.00
mm 		3.02
mm 		1044174 | TPM-0250-02600-M --- Taper Metric Pins - 2.5 mm x 26 mm x 3.02 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-02600-M Taper Metric Pins - 2.5 mm x 26 mm x 3.02 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		28.00
mm 		3.06
mm 		1044181 | TPM-0250-02800-M --- Taper Metric Pins - 2.5 mm x 28 mm x 3.06 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-02800-M Taper Metric Pins - 2.5 mm x 28 mm x 3.06 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		28.00
mm 		3.06
mm 		1044181 | TPM-0250-02800-M --- Taper Metric Pins - 2.5 mm x 28 mm x 3.06 mm
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: TPM-0250-02800-M Taper Metric Pins - 2.5 mm x 28 mm x 3.06 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		30.00
mm 		3.10
mm 		Goupille conique 2,5 x 30 x 3,1 mm - Acier au carbone - 2,5 mm - Petite extrémité - MBA (Pack de 50)
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: Goupille conique 2,5 x 30 x 3,1 mm - Acier au carbone - 2,5 mm - Petite extrémité - MBA (Pack de 50) Goupille conique 2,5 x 30 x 3,1 mm - Acier au carbone - 2,5 mm - Petite extrémité - MBA (Pack de 50) / Pins
Contact Us | Item Discontinued - Please contact us if you need a large quantity
2.50
mm 		30.00
mm 		3.10
mm 		Goupille conique 2,5 x 30 x 3,1 mm - Acier au carbone - 2,5 mm - Petite extrémité - MBA (Pack de 50)
Material: Carbon Steel Unhardened    Hardness: 21 Rc +/- 8  
Category: Pins - Taper Metric - Carbon Steel
Part Number: Goupille conique 2,5 x 30 x 3,1 mm - Acier au carbone - 2,5 mm - Petite extrémité - MBA (Pack de 50) Goupille conique 2,5 x 30 x 3,1 mm - Acier au carbone - 2,5 mm - Petite extrémité - MBA (Pack de 50) / Pins
Contact Us | Item Discontinued - Please contact us if you need a large quantity