Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide

15 Products in this selection
  • Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
  • Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
  • Tooth Length (T) - 0.60mm.
  • Tooth Height (H) - 0.46mm.
  • Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm.
  • Pitch (P) - 2.073mm (0.0816 inch)
Additional resources:
Timing Belts Catalogue PDF
Timing Pulleys Catalogue
Teeth Length Width Reinforcement Appearance Indicative
Image
45
Nr. 		93.285
mm 		4.8
mm 		Kevlar
 Black
 1158460 | B-40D-0045-0048-PKB --- Belts - 45 Teeth x 93.285 mm x 4.8 mm
Material: Polyurethane with Kevlar Cords    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0045-0048-PKB Belts - 45 Teeth x 93.285 mm x 4.8 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
Teeth Length Width Indicative
Image
45
Nr. 		93.285
mm 		4.8
mm 		1158460 | B-40D-0045-0048-PKB --- Belts - 45 Teeth x 93.285 mm x 4.8 mm
Material: Polyurethane with Kevlar Cords    Reinforcement: Kevlar    Appearance: Black    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0045-0048-PKB Belts - 45 Teeth x 93.285 mm x 4.8 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
52
Nr. 		107.796
mm 		4.8
mm 		Kevlar
 Black
 Courroie de distribution 52 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2)
Material: Polyurethane with Kevlar Cords    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: Courroie de distribution 52 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2) Courroie de distribution 52 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2) / Belts
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$5.00 AUD
Each
52
Nr. 		107.796
mm 		4.8
mm 		Courroie de distribution 52 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2)
Material: Polyurethane with Kevlar Cords    Reinforcement: Kevlar    Appearance: Black    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: Courroie de distribution 52 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2) Courroie de distribution 52 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2) / Belts
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.00 AUD
$5.00 AUD
Each
60
Nr. 		124.38
mm 		4.8
mm 		Kevlar
 Black
 1169347 | B-40D-0060-0048-PKB --- Belts - 60 Teeth x 124.38 mm x 4.8 mm
Material: Polyurethane    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0060-0048-PKB Belts - 60 Teeth x 124.38 mm x 4.8 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Wed, Apr 30, 2025
$19.86 AUD
$19.86 AUD
Each
60
Nr. 		124.38
mm 		4.8
mm 		1169347 | B-40D-0060-0048-PKB --- Belts - 60 Teeth x 124.38 mm x 4.8 mm
Material: Polyurethane    Reinforcement: Kevlar    Appearance: Black    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0060-0048-PKB Belts - 60 Teeth x 124.38 mm x 4.8 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Wed, Apr 30, 2025
$19.86 AUD
$19.86 AUD
Each
61
Nr. 		126.453
mm 		4.8
mm 		Kevlar
 Black
 1170117 | B-40D-0061-0048-PKB --- Belts - 61 Teeth x 126.453 mm x 4.8 mm
Material: Polyurethane    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0061-0048-PKB Belts - 61 Teeth x 126.453 mm x 4.8 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Wed, Apr 30, 2025
$11.50 AUD
$11.50 AUD
Each
61
Nr. 		126.453
mm 		4.8
mm 		1170117 | B-40D-0061-0048-PKB --- Belts - 61 Teeth x 126.453 mm x 4.8 mm
Material: Polyurethane    Reinforcement: Kevlar    Appearance: Black    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0061-0048-PKB Belts - 61 Teeth x 126.453 mm x 4.8 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Wed, Apr 30, 2025
$11.50 AUD
$11.50 AUD
Each
85
Nr. 		176.205
mm 		4.8
mm 		Kevlar
 Black
 Courroie de distribution 85 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 3)
Material: Polyurethane with Kevlar Cords    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: Courroie de distribution 85 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 3) Courroie de distribution 85 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 3) / Belts
3 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$5.00 AUD
Each
85
Nr. 		176.205
mm 		4.8
mm 		Courroie de distribution 85 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 3)
Material: Polyurethane with Kevlar Cords    Reinforcement: Kevlar    Appearance: Black    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: Courroie de distribution 85 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 3) Courroie de distribution 85 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 3) / Belts
3 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.00 AUD
$5.00 AUD
Each
85
Nr. 		176.205
mm 		4.8
mm 		Polyester
 Yellow
 Courroie de distribution 85 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Jaune - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2)
Material: Polyurethane with Polyester Cords    Breaking Strength: 267 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C    Tooth Angle (A): 60 Deg.   
Part Number: Courroie de distribution 85 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Jaune - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2) Courroie de distribution 85 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Jaune - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2) / Belts
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$12.00 AUD
Per 2
85
Nr. 		176.205
mm 		4.8
mm 		Courroie de distribution 85 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Jaune - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2)
Material: Polyurethane with Polyester Cords    Reinforcement: Polyester    Appearance: Yellow    Breaking Strength: 267 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C    Tooth Angle (A): 60 Deg.   
Part Number: Courroie de distribution 85 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Jaune - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2) Courroie de distribution 85 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Jaune - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 2) / Belts
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$12.00 AUD
$12.00 AUD
Per 2
95
Nr. 		196.935
mm 		4.8
mm 		Polyester
 Black
 Courroie de distribution 95 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1)
Material: Polyurethane with Polyester Cords    Breaking Strength: 283 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: Courroie de distribution 95 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1) Courroie de distribution 95 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1) / Belts
85 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$5.00 AUD
Each
95
Nr. 		196.935
mm 		4.8
mm 		Courroie de distribution 95 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1)
Material: Polyurethane with Polyester Cords    Reinforcement: Polyester    Appearance: Black    Breaking Strength: 283 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: Courroie de distribution 95 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1) Courroie de distribution 95 dents 4,8 mm de large mm - Polyuréthane impérial avec cordons en polyester - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1) / Belts
85 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.00 AUD
$5.00 AUD
Each
100
Nr. 		207.3
mm 		4.8
mm 		Kevlar
 Black
 Courroie de distribution 100 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1)
Material: Polyurethane with Kevlar Cords    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: Courroie de distribution 100 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1) Courroie de distribution 100 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1) / Belts
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
100
Nr. 		207.3
mm 		4.8
mm 		Courroie de distribution 100 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1)
Material: Polyurethane with Kevlar Cords    Reinforcement: Kevlar    Appearance: Black    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: Courroie de distribution 100 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1) Courroie de distribution 100 dents 4,8 mm de large - Polyuréthane impérial avec cordons Kevlar - Noir - 2,073 mm (0,082 pouce) Pas trapézoïdal 40DP - MBA (Pack de 1) / Belts
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
110
Nr. 		228.03
mm 		4.8
mm 		Kevlar
 Black
 1191221 | B-40D-0110-0048-PKB --- Belts - 110 Teeth x 228.03 mm x 4.8 mm
Material: Polyurethane    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0110-0048-PKB Belts - 110 Teeth x 228.03 mm x 4.8 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Wed, Apr 30, 2025
$24.77 AUD
$24.77 AUD
Each
110
Nr. 		228.03
mm 		4.8
mm 		1191221 | B-40D-0110-0048-PKB --- Belts - 110 Teeth x 228.03 mm x 4.8 mm
Material: Polyurethane    Reinforcement: Kevlar    Appearance: Black    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0110-0048-PKB Belts - 110 Teeth x 228.03 mm x 4.8 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Wed, Apr 30, 2025
$24.77 AUD
$24.77 AUD
Each
115
Nr. 		238.395
mm 		4.8
mm 		Polyester
 Black
 1192522 | B-40D-0115-0048-PPB --- Belts - 115 Teeth x 238.395 mm x 4.8 mm
Material: Polyurethane with Polyester Cords    Breaking Strength: 283 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0115-0048-PPB Belts - 115 Teeth x 238.395 mm x 4.8 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Each
115
Nr. 		238.395
mm 		4.8
mm 		1192522 | B-40D-0115-0048-PPB --- Belts - 115 Teeth x 238.395 mm x 4.8 mm
Material: Polyurethane with Polyester Cords    Reinforcement: Polyester    Appearance: Black    Breaking Strength: 283 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0115-0048-PPB Belts - 115 Teeth x 238.395 mm x 4.8 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$13.20 AUD $8.00 AUD
Each
125
Nr. 		259.125
mm 		4.8
mm 		Kevlar
 Black
 1195163 | B-40D-0125-0048-PKB --- Belts - 125 Teeth x 259.125 mm x 4.8 mm
Material: Polyurethane with Kevlar Cords    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0125-0048-PKB Belts - 125 Teeth x 259.125 mm x 4.8 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$8.00 AUD
Each
125
Nr. 		259.125
mm 		4.8
mm 		1195163 | B-40D-0125-0048-PKB --- Belts - 125 Teeth x 259.125 mm x 4.8 mm
Material: Polyurethane with Kevlar Cords    Reinforcement: Kevlar    Appearance: Black    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0125-0048-PKB Belts - 125 Teeth x 259.125 mm x 4.8 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$8.00 AUD
Each
130
Nr. 		269.49
mm 		4.8
mm 		Polyester
 Yellow
 1196655 | B-40D-0130-0048-PPY --- Belts - 130 Teeth x 269.49 mm x 4.8 mm
Material: Polyurethane    Breaking Strength: 267 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C    Tooth Angle (A): 60 Deg.   
Part Number: B-40D-0130-0048-PPY Belts - 130 Teeth x 269.49 mm x 4.8 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$14.59 AUD
$14.59 AUD
Each
130
Nr. 		269.49
mm 		4.8
mm 		1196655 | B-40D-0130-0048-PPY --- Belts - 130 Teeth x 269.49 mm x 4.8 mm
Material: Polyurethane    Reinforcement: Polyester    Appearance: Yellow    Breaking Strength: 267 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C    Tooth Angle (A): 60 Deg.   
Part Number: B-40D-0130-0048-PPY Belts - 130 Teeth x 269.49 mm x 4.8 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$14.59 AUD
$14.59 AUD
Each
150
Nr. 		310.95
mm 		4.8
mm 		Polyester
 Black
 1200889 | B-40D-0150-0048-PPB --- Belts - 150 Teeth x 310.95 mm x 4.8 mm
Material: Polyurethane with Polyester Cords    Breaking Strength: 283 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0150-0048-PPB Belts - 150 Teeth x 310.95 mm x 4.8 mm
5 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
150
Nr. 		310.95
mm 		4.8
mm 		1200889 | B-40D-0150-0048-PPB --- Belts - 150 Teeth x 310.95 mm x 4.8 mm
Material: Polyurethane with Polyester Cords    Reinforcement: Polyester    Appearance: Black    Breaking Strength: 283 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0150-0048-PPB Belts - 150 Teeth x 310.95 mm x 4.8 mm
5 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
155
Nr. 		321.315
mm 		4.8
mm 		Kevlar
 Black
 1201754 | B-40D-0155-0048-PKB --- Belts - 155 Teeth x 321.315 mm x 4.8 mm
Material: Polyurethane with Kevlar Cords    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0155-0048-PKB Belts - 155 Teeth x 321.315 mm x 4.8 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$10.00 AUD
Each
155
Nr. 		321.315
mm 		4.8
mm 		1201754 | B-40D-0155-0048-PKB --- Belts - 155 Teeth x 321.315 mm x 4.8 mm
Material: Polyurethane with Kevlar Cords    Reinforcement: Kevlar    Appearance: Black    Breaking Strength: 566 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0155-0048-PKB Belts - 155 Teeth x 321.315 mm x 4.8 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$10.00 AUD
Each
240
Nr. 		497.52
mm 		4.8
mm 		Polyester
 Black
 1211547 | B-40D-0240-0048-PPB --- Belts - 240 Teeth x 497.52 mm x 4.8 mm
Material: Polyurethane with Polyester Cords    Breaking Strength: 283 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0240-0048-PPB Belts - 240 Teeth x 497.52 mm x 4.8 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
240
Nr. 		497.52
mm 		4.8
mm 		1211547 | B-40D-0240-0048-PPB --- Belts - 240 Teeth x 497.52 mm x 4.8 mm
Material: Polyurethane with Polyester Cords    Reinforcement: Polyester    Appearance: Black    Breaking Strength: 283 N    Min Temperature: -18 Deg C    Max Temperature: 82 Deg C   
Part Number: B-40D-0240-0048-PPB Belts - 240 Teeth x 497.52 mm x 4.8 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$12.00 AUD
$19.80 AUD $12.00 AUD
Each