Bearings - Ball Thrust Flat - Stainless Steel

Bearings - Ball Thrust Flat   Bearings - Ball Thrust Flat - Stainless Steel
28 Products In this Selection
3 Piece Thrust Bearings Open Type with Flat Washers
These bearings are designed so that when one ring turns, the other remains stationary.
Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races.
Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate.
Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Nominal Shaft Size (d1) OD (D1) Thickness (T) (d2) OD (D2) Dynamic Load Capacity Indicative
Image
28.000
mm
+ 0.070 / +0.300 		41.000
mm
-0.040/-0.220 		11.000
mm
+0.360/-0.240 		28.000
mm
-0.025/-0.202 		41.000
mm
-0.025/-0.202 		95
kgf 		Roulement de butée 28 x 41 x 11 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1)
Material: Stainless 440C Grade and Nylon    Material (Races and Balls): 400 Series Stainless Steel    Cage Type: Moulded Nylon   
Part Number: Roulement de butée 28 x 41 x 11 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) Roulement de butée 28 x 41 x 11 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) / Bearings
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$67.41 AUD
$67.41 AUD
Per Each
Nominal Shaft Size (d1) OD (D1) Thickness (T) (d2) Indicative
Image
28.000
mm
+ 0.070 / +0.300 		41.000
mm
-0.040/-0.220 		11.000
mm
+0.360/-0.240 		28.000
mm
-0.025/-0.202 		Roulement de butée 28 x 41 x 11 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1)
Material: Stainless 440C Grade and Nylon    OD (D2): 41.000 mm -0.025/-0.202    Dynamic Load Capacity: 95 kgf    Material (Races and Balls): 400 Series Stainless Steel    Cage Type: Moulded Nylon   
Part Number: Roulement de butée 28 x 41 x 11 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) Roulement de butée 28 x 41 x 11 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) / Bearings
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$67.41 AUD
$67.41 AUD
Per Each
28.575
mm
+ 0.076 / +0.263 		44.450
mm
-0.013/-0.208 		11.113
mm
+0.360/-0.240 		28.575
mm
-0.025/-0.202 		44.450
mm
-0.025/-0.202 		99
kgf 		Roulement de butée 28,575 x 44,45 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1)
Material: Stainless 440C Grade and Nylon    Material (Races and Balls): 400 Series Stainless Steel    Cage Type: Moulded Nylon   
Part Number: Roulement de butée 28,575 x 44,45 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) Roulement de butée 28,575 x 44,45 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) / Bearings
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$55.59 AUD
$55.59 AUD
Per Each
28.575
mm
+ 0.076 / +0.263 		44.450
mm
-0.013/-0.208 		11.113
mm
+0.360/-0.240 		28.575
mm
-0.025/-0.202 		Roulement de butée 28,575 x 44,45 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1)
Material: Stainless 440C Grade and Nylon    OD (D2): 44.450 mm -0.025/-0.202    Dynamic Load Capacity: 99 kgf    Material (Races and Balls): 400 Series Stainless Steel    Cage Type: Moulded Nylon   
Part Number: Roulement de butée 28,575 x 44,45 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) Roulement de butée 28,575 x 44,45 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) / Bearings
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$55.59 AUD
$55.59 AUD
Per Each
28.575
mm
+ 0.076 / +0.263 		47.625
mm
-0.013/-0.208 		11.113
mm
+0.360/-0.240 		28.575
mm
-0.025/-0.202 		47.625
mm
-0.025/-0.202 		116
kgf 		Roulement de butée 28,575 x 47,625 x 11,113 mm - 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon - MBA (lot de 1)
Material: Stainless 440C Grade and Nylon    Material (Races and Balls): 400 Series Stainless Steel    Cage Type: Moulded Nylon   
Part Number: Roulement de butée 28,575 x 47,625 x 11,113 mm - 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon - MBA (lot de 1) Roulement de butée 28,575 x 47,625 x 11,113 mm - 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon - MBA (lot de 1) / Bearings
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$46.86 AUD
$46.86 AUD
Per Each
28.575
mm
+ 0.076 / +0.263 		47.625
mm
-0.013/-0.208 		11.113
mm
+0.360/-0.240 		28.575
mm
-0.025/-0.202 		Roulement de butée 28,575 x 47,625 x 11,113 mm - 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon - MBA (lot de 1)
Material: Stainless 440C Grade and Nylon    OD (D2): 47.625 mm -0.025/-0.202    Dynamic Load Capacity: 116 kgf    Material (Races and Balls): 400 Series Stainless Steel    Cage Type: Moulded Nylon   
Part Number: Roulement de butée 28,575 x 47,625 x 11,113 mm - 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon - MBA (lot de 1) Roulement de butée 28,575 x 47,625 x 11,113 mm - 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon - MBA (lot de 1) / Bearings
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$46.86 AUD
$46.86 AUD
Per Each
38.100
mm
+ 0.076 / +0.263 		53.975
mm
-0.013/-0.208 		11.113
mm
+0.360/-0.240 		38.100
mm
-0.025/-0.202 		53.975
mm
-0.025/-0.202 		86
kgf 		Roulement de butée 38,1 x 53,975 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1)
Material: Stainless 440C Grade and Nylon    Material (Races and Balls): 400 Series Stainless Steel    Cage Type: Moulded Nylon   
Part Number: Roulement de butée 38,1 x 53,975 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) Roulement de butée 38,1 x 53,975 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) / Bearings
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$61.50 AUD
$61.50 AUD
Per Each
38.100
mm
+ 0.076 / +0.263 		53.975
mm
-0.013/-0.208 		11.113
mm
+0.360/-0.240 		38.100
mm
-0.025/-0.202 		Roulement de butée 38,1 x 53,975 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1)
Material: Stainless 440C Grade and Nylon    OD (D2): 53.975 mm -0.025/-0.202    Dynamic Load Capacity: 86 kgf    Material (Races and Balls): 400 Series Stainless Steel    Cage Type: Moulded Nylon   
Part Number: Roulement de butée 38,1 x 53,975 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) Roulement de butée 38,1 x 53,975 x 11,113 mm – 3 pièces de type rondelle plate en acier inoxydable de qualité 440C et nylon – MBA (lot de 1) / Bearings
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$61.50 AUD
$61.50 AUD
Per Each